ATG FPBL22-20W-T1-RU DUO G2 Series Backlit Flat Panel Instruction Manual
- June 2, 2024
- ATG
Table of Contents
ATG FPBL22-20W-T1-RU DUO G2 Series Backlit Flat Panel
INSTALLATION INSTRUCTIONS
LED BACK-LIT PANEL LIGHT
Please read these instructions carefully before installation and keep for
reference.
WARNINGS
- Risk of electrical shock. Do not open or remove covers Refer servicing to qualified service personnel.
- Disconnect power before repairs and maintenance.
- Risk of electrical shock. Use in dry or damp locations only.
- Risk of electrical shock. Not for use where exposed to weather.
IMPORTANT
- Read instructions carefully before installation.
- Keep these instructions for future reference.
- The backlit LED panels must be wired by the National Electrical Code and all applicable local codes.
- Proper grounding is required for safety
- This product must be installed by the applicable installation code by a qualified electrician Electrician who is familiar with the construction and operation of the product and the hazards involved.
CAUTION
- Inherently protected.
- Access above the ceiling is required.
- Suitable for damp locations use.
- This product must be installed by the applicable installation code by a person familiar with the construction and operation of the product and the hazard involved.
- Suitable for operation in ambient not exceeding 104°F.
- Do not press the diffuser with your fingers (when installing the panel light).
Risk of fire electric shock. The backlit LED panels installation requires knowledge of luminaires and electrical systems. If not qualified, DO NOT attempt installation.
Contact a qualified electrician.
- Turn off electrical power at the fuse or circuit breaker box before wiring the fixture to the power supply.
- Turn off the power when you perform any maintenance.
Recessed Installation
Cable Mounting(Cable assembly must be purchased separately)
Ceiling Mounting(Mounting kit sold separately)
WIRE CONNECTION
Read User Manual Online (PDF format)
Loading......