ATG LIFI4-36W-T1-G3 Huron Series Linear Fixture User Guide
- June 13, 2024
- ATG
Table of Contents
ATG LIFI4-36W-T1-G3 Huron Series Linear Fixture
Safety Instructions
To ensure correct function and safety, please read and follow all instructions carefully before using the product:
- Turn off power before installation or before doing any maintenance work.
- Do not install any luminaire near the heat source.
- Do not exceed the nominal supply voltage or amperage ratings.
- Dimmable version could be compatible with a wide range of recommended TRIAC dimmers.
- All wiring and installation of the light fitting must adhere to local and national wiring rules.
- Take care not to pull any electrical wires during unpacking as this may damage the connection.
- Lay out all the components on a smooth surface and make sure there are no components missing before assembling.
- To avoid injury or damage to the fitting, please ensure that power leads and screws are secure before connecting the power.
- Please keep instructions for future reference.
Installation Procedure
WARNING
- Switch off before installation.
- Switch on only after complete installation and examination of the circuit.
- Professional electrician for installation and maintenance only.
Turn Off power supply before starting any installation. Read instructions & check you have all the tools & accessories to complete the installation correctly
Surface mounted installation
Steel wire suspension steps
Wall mounted installation
Straight “一“
Corner “L“
Cross“+“
Corner “T“
Cover installation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>