nordlux MI4A Clyde 4 Spot LED Pendant Light Instruction Manual

nordlux MI4A Clyde 4 Spot LED Pendant Light

Product Specifications

• Dimensions : 3cm x 9cm x 20.8cm x 23.2cm
• LED : 4x4W
• Model : CLYDE

Product Usage Instructions

Mounting Instructions

1. Identify the mounting location for the product.
2. Securely attach the product using appropriate mounting screws (excluded).

Reset Function

To reset to default settings:

1. Turn the product on and off continuously for 5 times within a 5-second interval.

Maintenance Instructions

General maintenance:

• Use a soft, dry cloth for dusting.
• Use a soft, damp cloth to gently remove grease or stains.
• Avoid using detergents or chemical reagents.

Frequently Asked Questions (FAQ)

1. Q: What should I do if the lights do not turn on?
   A: Check the power source and ensure proper installation. If issues persist, contact customer support.

2. Q: Can the LED lights be replaced?
   A: The LED lights in this product are non-replaceable.

3. Q: How do I clean mouth-blown glass components?
   A: Clean mouth-blown glass when cold using a soft, dry cloth for dusting and a soft, damp cloth for stains.

MOUNTING INSTRUCTIONS

3-STEP MOODMAKER™ FUNCTION·WORKS WITH A NORMAL WALL SWITCH

RESET FUNCTION

•  The lamp is only suitable for connecting directly to the mains.
• Do not exceed the maximum wattage.
•   Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product
• The mounting instruction must not be discarded
• IP20: The lamp should only be installed in areas where direct contact with water cannot occur
• Class II : The lamp is double-insulated and does not need to be connected to the Yellow/Green earth wire
• ** IMPORTANT!** Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice.
• Z-connection : the wire cannot be replaced if damaged, and the lamp must be discarded.
• General maintenance: Use a soft, dry cloth for dusting, and a soft, damp cloth to gently remove grease or similar stains. Never use any detergents or chemical reagents. Do not switch on the lamp before all the water has evaporated. Specifically for mouth-blown glass: Mouth-blown glass is formed manually. Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary. This is to be seen as a natural consequence of the manual process and is what gives mouth-blown glass its character and organic look. Always clean mouth-blown alas when the alas is cold

This product contains light sources of energy efficiency class ‹F>

www.nordlux.com
DK-9000 Aalborg

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>