EquipMaxx PRO60 Aquaspray Rolling Water Tank Instruction Manual

June 2, 2024
EquipMaxx

EquipMaxx PRO60 Aquaspray Rolling Water Tank

Thank you

Thank you for choosing our Aquaspray Pro60 Rolling Water Tank. We are continuously improving our products to ensure more convenient, efficient, and safe usage.

Make sure to read the instruction manual before using the water tank. Please keep it in a safe place for future reference. At any time you require immediate assistance, please call us at l- 800-349-9795 or send us an email to service@equipmaxx.com.

Bryan Watson
President

PUMPING TANK DIAGRAM

No. NAME
1 Iron frame
2 Rear wheel
3 Front wheel
4 Water tank
5 Electrical box
6 Hose
7 Inlet elbow
8 Reel crank

Pumping Tank Diagram

No. NAME
1 Reel rack
2 Cover
3 Outlet cover
4 Inlet pipe

Pumping Tank Diagram

No. NAME
1 Water pump
2 Battery
3 Fixed spring
4 Gasket
5 Regulator
6 Power switch
7 Charging stand
8 Outlet connection

Pumping Tank Diagram

SPECIFICATIONS

PART| PARAMETER| UNIT|
---|---|---|---
Tank| Size (L X w X H)| in| 3518.533.3
Gross Weight| lb| 104.7 (empty)
Tank Capacity| L| 60
Hose| m| 1328
Water pump| Type| | Diaphragm pump
Operating Voltage| V| 12
Maximum pressure| psi| 94.27
Working pressure| psi| 29-65
Battery| Operating Voltage| V| 12
Capacity| AH| 8
Charger| Rated input voltage| V| AC220
Rated output voltage| V| DC12.6
Rated output current| A| 1.0

PROFILE

The Aquaspray Pro60 Water Tank is powered by a lithium-ion rechargeable battery and a diaphragm pump, which pressurizes the water flow. The tank holds 16 gallons ( 60 liters) of water and can operate for up to 5 hours on a full charge (working time may vary based on battery capacity.)

FEATURES

  • The Aquaspray Pro60 Water Tank comes with:
    • tank
    • base
    • battery
    • charger
    • power switch
    • pump
  • It features a diaphragm pump, that provides high pressure water flow that can be regulated manually using a twist flow knob. This ensures an efficient and effective water flow, ideal for exterior cleaning, including window/ solar panel cleaning and car washing.

IMPORTANT

THE TANK’S MOTOR IS DESIGNED WITH A DIAPHRAGM PUMP. EXPOSURE TO, OR STORAGE IN EXTREME HEAT CAN CAUSE THE DIAGRAM TO JAM, MAKING THE PUMP INOPERABLE. ALWAYS STORE THE TANK IN AN AREA WITHOUT EXTREME HEAT (GREATER THAN 90F) OR COLD (LESS THAN 32F) TEMPERATURES TO MAINTAIN THE PUMP’S FUNCTIONALITY. IF THE PUMP TURNS ON BUT DOES NOT WORK, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT AT l-800-349-9795 OR SERVICE@EQUIPMAXX.COM.

USAGE INSTRUCTIONS

STEP ONE
Before each use, ensure that the charger plug is inserted into the charger base connector and connected to a 120V power source. Charge the battery for approximately 3 hours, or until the green light indicates a full charge. When not in use, place the charger base into the protective cover, particularly if it becomes damp.

STEP TWO
Always use the filter when adding water to the tank. This prevents impurities from clogging the filter, pipe, and cylinder, which could hinder the pumping tank’s normal operation. After filling the tank, securely fasten the cap to avoid any spills during use.

STEP THREE
Do not use water-insoluble substances as they do not dissolve and may remain in the tank. These solids can settle at the bottom over time, potentially causing blockages and affecting the device’s functionality.

SymbolSTEP FOUR
In case of any spills clean them up immediately. If the battery or any electrical component come into contact with water, remove and dry them thoroughly with a dry cloth.

STEP FIVE
The power switch is located on the left side and has two settings: “-” for spray and “O” for off.

STEP SIX
To start the machine, turn the power switch to the spray position”-“. This will activate the motor and begin the operation.

STEP SEVEN
To stop the machine, switch the power to the off position “O”.

STEP EIGHT
Recharge the battery after use to maintain its longevity.

SAFETY INSTRUCTIONS

Improper use of this tank can be dangerous. You must read and adhere to the safety precautions to guarantee your safety and that of others.

TURN OFF & UNPLUG
Always turn off the motor and unplug it when not in use. Do not leave the running tank unattended.

SymbolSTORAGE TIPS
Store the tank in a cool, dry place, away from heat and direct sunlight.

PROPER MAINTENANCE
After use, completely drain and empty the tank. Ensure the tank is thoroughly cleaned. For external cleaning, gently wipe with a damp cloth.

PROHIBITED ACTIONS
Do NOT attempt to disassemble, modify, or reassemble the motor or pump.

CHARGING TIME
The motor must be charged for 3 to 4 hours before each use.

SymbolSPECIALIZED SOLUTIONS
Do not use strong acids, strong alkalis, or flammable liquids in the tank. It is designed exclusively for window cleaning solutions.

LONG-TERM STORAGE

The battery must be discharged and recharged every three months.

After maintenance, store the tank in a dry and well ventilated area.

Recommended operating temperature range: 23°F to l04°F (-5°C to 40°C ).

Symbol It should stored away from extreme heat and direct sunlight which can damage the pump diaphragm.

WARRANTY 6 CUSTOMER SERVICE

The AquaSpray Pro60 Rolling Water Tank accessories and housing are warranted to be free from defects in material and workmanship for a period of One (1) year from the date of purchase when utilized for normal household use by the original purchaser only. This does not include the replacement of items due to wear. To initiate a warranty claim, the original purchaser must email service@equipmaxx.com with the following information: order number, original purchase date, and description of the issue or defect. Please attach clear images or videos, if applicable, illustrating the issue or defect.

If you have any questions or concerns, feel free to call us directly at 1-800-349-9795 or send us an email at service@equipmaxx.com.Logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals