Tiktok D01 Pro Bluetooth Remote Control User Manual

Tiktok D01 Pro Bluetooth Remote Control

Product Introduction

Packing List

Instructions for Use

Power On

• Press the middle button for 1 second, and the red and blue lights flash alternately

Power Off

• Press and hold the middle button for 5 seconds and the red light is on, or put it in the charging case.
• Automatic power off after 5 minutes without connection.
• Automatic power off after 30 minutes without operation.

Working Mode of the Ring

• Short Video Mode – Main function:
• Remote control short videos, selfie
• Music Mode – Main functions:
• Music control (pause/play/up/down), call control (answer/hang up/reject)

How to Switch the Working Mode of the Ring

• The factory mode of the ring is Short Video Mode.
• When the ring is powered on, switch mode operation as shown in the following figure:

Instructions for First Use

Connecting to Phone/ Tablet/ iPad: Press and hold the middle button of the ring for 1 second, the red and blue lights flash alternately > Turn on the mobile phone Bluetooth> Search for Bluetooth device “D01 Pro”> Click to connect the device> Complete Bluetooth connection, you can use it in the Short Video Mode. (Tablet/iPad erected for use)

Note: When using Android and HarmonyOS phones, it can be used by connecting to Bluetooth. In addition to connecting to Bluetooth for iPhone and iPad, please refer to the instructions.
When the ring is turned on again, it keeps the last working mode and automatically connects to the last device.

Short Video Mode Button Function

Music Mode Button Function

Charging

Low Power Warning
The red light of the ring flashes slowly, and the blue light of the charging case flashes slowly, indicating low power.

Note for iPhone and iPad User

1. First, make sure that the system software (iOS) of the iPhone or iPad is higher than 14.8;
2. The AssistiveTouch function must be turned on, as shown in the figures below;
3. If the previous items 1 and 2 have been completed, but the video still cannot slide up and down normally or can only be paused by pressing the button, please turn off the iPhone or iPad and turn it on again;
4. After AssistiveTouch is turned on, 2 dots will appear, the large one can be dragged, and the small one cannot be dragged. When the video is not swiped, it will disappear after 30 seconds. Android and HarmonyOS phones do not have these two dots.

Frequently Asked Questions

• Q1. Can the ring be connected to a phone simultaneously with a Bluetooth headset or speaker?
• A: Yes, they can be connected and used together.
• Q2. How to take photos and videos with the Ring remote control phone?
• A: In short video mode, only the original camera and some beauty cameras are supported for taking photos and videos. Press and hold the “volume +” or “volume -” for 2 seconds to take a photo or video. In the short video Apps, the function of adjusting background music volume conflicts with the remote control of the shutter key, such as TikTok, so taking photos and videos is not supported. To take photos and videos in the short video Apps, you can choose our D07 series products.
• Q3. About e-books page turning.
• A: It supports page turning in most e-book apps. Double-click the “Volume+” or “Volume-” button to turn pages left or right. If page turning still doesn’t work, you need to select “Simulation” in the e-book reading interface settings.
• Q4. Can it be used with a Kindle e-reader?
• A: It is not applicable to Kindle e-readers, but it is applicable to the Kindle app. Our D07 series products are suitable for Kindle e-readers.
• Q5. Can it be used at a foldable screen phone?
• A: It can be used. Foldable screen phones generally require the phone to be unfolded and upright for use. If it still cannot be used, please restart the phone again.
• Q6. What if the iPhone or iPad can’t swipe up and down normally or can only pause the video after turning on the touch and restarting?
• A: First, please press the middle button of the ring to confirm whether the cursor (small black dot) deviates from the default position. The default position is indicated by the arrow “Default position of cursor point” in the figure below, and the upper third of the screen is centred. If the position deviates too far, it may lead to the above problems. The solution is to slightly drag the “Tracking Sensitivity Slider” in the following figure to the left or right. Press the middle button of the ring to confirm every adjustment until the cursor (small black dot) reaches the default position or nearby, and make sure that the “Perform Touch Gestures” in the following figure is turned on, and you can swipe the video up and down.

• Q7. What should I do if the Bluetooth headset cannot hear the call sound when using a ring to answer calls on Android and HarmonyOS phones?
• A: Refer to the settings shown in the figure below (using Android system phones as an example) to solve the problem.

Specifications

Ring

• Bluetooth Version: Ver.5.0
• Transmission Power: ClassII(-6dBm~+4dBm)
• Frequency (Hz): 2.40GHz~2.48GHz
• Bluetooth Name: D01 Pro
• Communication Distance: 10 meters
• Battery Capacity: 25mAh
• Charging Time: About 1.5 hours

Charging Case

• Battery Capacity: 250mAh
• Charging Time: About 1.5 hours
• Charging Interface: Type-C

Warning

• Patented products and counterfeiting must be investigated!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>