EquipMaxx Pro16 Aquaspray Rolling Water Tank Instruction Manual

: June 2, 2024
: EquipMaxx

EquipMaxx Pro16 Aquaspray Rolling Water Tank Instruction Manual

Thank you for purchasing from Equipmaxx. Read and follow thimanual carefully to ensure that you get the most out of your ew pumping tank. Please keep it in a safe place for future eference.
We are continuously improving our products to ensure more convenient, efficient, and safe usage. We are committed to providing you with the best products and services at all times.
We look forward to hearing about your experience with our product and if at any time you require immediate assistance,
please call us at 1-800-349-9795 or send us an email [email protected].
Bryan Watson
President

TANK DIAGRAM

SPECIFICATIONS

The Aquaspray Prol6 Water Tank is powered by a lithium-io rechargeable battery and is driven by a diaphragm pump, which pressurizes the water flow. The tank holds 4 gallons (16 liters) of
water and can operate for up to 4 hours on a full charge. (working time may vary based on battery capacity.)

THE TANK’S MOTOR IS DESIGNED WITH A DIAPHRAGM PUMP. EXPOSURE TO, OR STORAGE IN EXTREME HEAT CAN CAUSE THE DIAGRAGM TO JAM, MAKING THE PUMP INOPERABLE. ALWAYS
STORE THE TANK IN AN AREA WITHOUT EXTREME HEAT (GREATER THAN 90F) OR COLD (LESS THAN 32F) TEMPERATURES TO MAINTAIN THE PUMP’S FUNCTIONALITY. IF THE PUMP TURNS ON BUT DOES NOT WORK, PLEASE CONTACT OUR CUSTOMER SERVICE DEPARTMENT AT 1-800-349-9795 OR [email protected].

OTHER IMPORTANT CONSIDERATIONS

PUMP DAMAGE RISK

Do not operate without liquid in the tank. This may damage the pump.

EXTENDED CHARGING

After long periods of time without use, the battery may have a low voltage and will require extended charging.

MAX TEMPERATURE

Never fill the tank with hot liquids (max. temp 85°F).

PROTECTIVE GEAR

Always wear protective clothing, a respirator, gloves, eye protection, etc., when using chemicals.

SPECIALIZED SOLUTIONS

Never operate with strong acids, strong bases or flammable liquids.

KEEP OUT OF REACH!

Do not leave the pumping tank in reach of children or persons not qualified to handle it in a proper fashion.

ORIGINAL PARTS

Always use the original replacement parts.

TEMPERATURE LIMITS

Don’t operate pumping tank in temperatures above 100°F or below 32°F.

SET UP YOUR TANK

STEP ONE

Remove any small parts from the intake filter.

STEP TWO

Attach each metal loop on the backpack straps to the bottom two loops on the tank.

STEP THREE

Loop each fabric strap through the top loop of the tank and thread back through the bottom side of the buckle.

USING THE TANK

STEP ONE

Make sure the battery is fully charged before the first use. A e A tank cap. indicates that the battery is charging. Once it turns green, the battery is fully charged.

STEP THREE

Turn the pump on by flipping the Control the flow of water to the switch on the side of the unit.
Flipping the switch to “I” will activate the pump at high speed. Flipping it to “II” allows for adjustable pump speed.

STEP TWO

Fill the tank with water through th intake filter and securely tighten the e A tank cap.

STEP FOUR

Control the flow of water to the switch on the side of the unit. waterfed pole and start cleaning!

STEP ONE

After use, completely The external parts of Store the tank in a dry, drain and empty the tank. Ensure the tankis thoroughly cleaned.

STEP TWO

The external parts of the tank can be cleaned with a damp cloth.

STEP THREE

Store the tank in a dry, cool place away from heat, direct sunlight, and children.

STEP FOUR

For long-term storage, regular discharging and recharging of the battery is required (with an interval of either every 2 weeks, one month, or two months) to maximize battery life.

WARRANTY & CUSTOMER SERVICE

The AquaSpray Prol6 Water Tank Backpack accessories an housing are warranted to be free from defects in material and workmanship for a period of One (1) year from the date of purchase when utilized for normal household use by the original purchaser only. This does not include the replacement of items due to wear. To initiate a warranty claim, the original purchaser must email [email protected] with the following information: order number, original purchase date, and description of the issue or defect. Please attach clear images or
videos, if applicable, illustrating the issue or defect. If you have any questions or concerns, feel free to call us directly at 1-800-349-9795 or send us an email at [email protected].

Read More About This Manual & Download PDF: