nordlux ALUDRA Aluminium Outdoor Wall Light User Manual
- June 2, 2024
- nordlux
Table of Contents
nordlux ALUDRA Aluminium Outdoor Wall Light
Specifications
- IP5X
- IPX4
- Max 15W
Product Information
This product is designed to be used with a maximum wattage of 15W. It is
important to adhere to the specified wattage to ensure safe operation and
longevity of the product. The product meets IP5X and IPX4 standards for
protection against dust and water splashes,] making it suitable for indoor and
outdoor use.
Usage Instructions:
- Before starting the installation, always switch off the power.
- Ensure that the lamp has a grounding terminal.
- Consult a qualified electrician for installation in some] countries.
Disposal
Dispose of the product properly by following local regulations for waste
electrical and electronic equipment. Do not discard it with regular household
waste. Contact local authorities or recycling facilities for guidance on
proper disposal methods.
FAQ
Q: What is the maximum wattage this product can handle?
A: The maximum wattage for this product is 15W. It is crucial not to exceed
this limit to prevent damage and ensure safety.
User Manual
- IP5X: Dust is prevented from entering the lamp in amounts that can cause damage to the function/safety of the lamp.
- IPX4: Raindrops falling from any angle will not affect the function/safety of the lamp
- Class I: lamp has an earth terminal and must be connected to the yellow/green earth wire
- The lamp is only suitable for connecting directly to the mains.
- MAX 15 WDo not exceed the maximum wattage.
Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly, It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchaser this product.
IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice.
- The mount in a instruction must not be discarded.
- Parallel arranging possible.
- General maintenance: Use a soft, dry cloth for dusting, and a soft, damp cloth to gently remove grease or similar stains. Never use any detergents or chemical reagents. Do not switch on the lamp before all the water has evaporated. Specifically for mouth-blown glass: Mouth-blown
We congratulate you on your new outdoor lamp!
We congratulate you on your new outdoor lamp!
Guarantee
The Nordlux Outdoor lamps in copper, brass, tombac and galvanized are
guaranteed for up to 15 years. This guarantee applies to extensive corrosion
in the form of holes in the metal caused by rust. The guarantee is subject to
presentation of receipt. There is not guarantee on the components which have
been damaged by wear and tear or mistreatment of the lamps
We congratulate you on your new outdoor
lamp Stainless steel Remember to take care of your lamp. Just follow the
guidelines below. The shiny, uniform and decorative surface of stainless steel
makes it very suitable for outdoor use.
It is an alloy consisting of iron, chrome and nickel. During bath pickling, a
thin, rustproof oxide layer forms on the surface. The surface is continually
vulnerable to atmospheric conditions, and from other effects of the close
environment. This means that the lamp must be regularly maintained if its
surface is to remain shiny and untar- nished by rust. Before setting it up,
treat your lamp with acid-free oil, and dry it off with a soft cloth. Repeat
this three or four times a year. Stainless steel lamps are not recommended for
use in aggressive environments such as coastal, agricultural or industrial
areas.
Copper,
Brass and Tombac fixtures Our copper, brass and tombac fixtures are made from
respectively solid copper, brass and tombac. The mechanical machining will
leave small scratches in the surface, as well as residues of rinse aid. This
rapidly disappears in the patina process. After the first rain showers the
copper / brass / tombak surface will appear stained, but the aerated air and
moisture will soon make the lamp appear with dark brownish color. Over the
years, the material copper will get a beautiful patina-green color and brass /
tombac will get a darker and more uniform color. The uniformity of the patina
surface, as well as the rate at which the process occurs is dependent on the
environment that affect the fixture.
Hot-galvanized
lamps The zinc treatment of the steel lamps is executed manually in plants.
The temperature of the melted zinc is about 460 degrees. When the lamps are
dipped in melted zinc a reaction between the metal occurs, which develops
alloys in the surface. The lamp and the components of the lamp are manually
dipped in the hot zinc. This treatment leaves variations in the coating in the
form of partly an uneven surface and partly minor formations of drops. Thin
»zinc curtains« might also occur on the surface and they show as a thin film
which hangs down from the edge of the lamp. This film can easily be removed or
brushed off with a soft brush.
Condensation
Condensation is a natural phenomenon arising under specific atmospheric
conditions. Damp heat and cold air meet, which causes condensation of water on
the surface. When water heats up it leads to rising water vapour, which will
be able to affect electric components. Condensation is not included by Nordlux
warranty, unless it is possible to prove that a technical /production error in
the lighting causes entry of water. In case of condensation please check:
- If the lighting is mounted according to instructions. Washers should seal tightly. Make sure to tension screws and lenses.
- In garden lightings rising damp from the ground may cause condensation in the metal post. This problem can be defeated by filling sealing material into the metal post.
Aluminium
fixtures Our aluminium light fixtures are made from die-cast and/or extruded
aluminium, where the light fixture’s design determines whether both types of
materials, or just one of them, are used for different parts of the same light
fixture. Aluminium light fixtures in raw aluminium are subsequently coated
with a special clear coat, which seals the surface to safeguard against
corrosion. Painted aluminium light fixtures are powder-coated and have a
uniform and smooth surface. To avoid the light fixture tarnishing, it is
recommended to clean and wipe the light fixture after mounting, and repeat
this process 3-4 times each year. This is done with a regular cleaning agent.
Black light fixtures which are bleached by strong sunlight can also benefit
from treatment with silicone spray as needed, to maintain the black color.
Mounting light fixtures in coastal, agricultural or industrial areas is not
recommended, as these aggressive surroundings may cause the light fixture to
corrode, which may entail spalling, bubbles in the surface and a whitish
incrustation on the light fixture’s surface. -It is highly important that
drainage holes are kept free of impurities if any.
BEFORE ASSEMBLING THE BOLLARD AGAIN DO REMEMBER TO WIPE OFF ALL PARTS!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>