TUNDRA DRONE DJI MAVIC 3 Automoving Light Drone User Guide
- October 30, 2023
- TUNDRA DRONE
Table of Contents
TUNDRA DRONE DJI MAVIC 3 Automoving Light Drone
Product Information
The Automoving Light for DJI Mavic 3 is a device designed to provide additional lighting for aerial photography and videography. It comes with two tracking mark stickers, a green and a red one, that need to be mounted on the aircraft’s camera. The device is manufactured by Tundra Drone AS and is designed in Norway.
Product Usage Instructions
- Mount the green tracking mark sticker aligned to the circle on the aircraft’s camera. Mount the red tracking sticker on the aircraft’s camera (see illustration).
- Position the Automoving light unit below the aircraft. Insert the aircraft from above into the Automotive light’s inner body.
- Place the Automoving light Battery into the Automoving light’s battery slots’ starting point. Press in the «Battery Latches» on both sides of the battery and position the battery to the battery slots’ starting point.
- Slide the battery forwards along the battery slots and into the Automotive light’s battery connector. Make sure the battery is mounted securely and that the «Battery Latches» have clicked into place on both sides.
- The image illustrates a correctly mounted b a t t e r y. W h e n c o r r e c t l y m o u n t e d , there should be no «GAP» between the battery and the battery connector on the Automoving light unit.
- Hold the power button on the battery down for around 3 seconds to turn on the Automoving light. On startup, the floodlight LED will blink once. When the boot sequence is ready, the lamp will blink one more time.
Note: For detailed instructions on product usage, refer to the User Manual available at https://tundradrone.com/support. Manufactured by Tundra Drone AS Address: Suomaluodda 44, 9520 Kautokeino, Norway Designed in Norway
SCAN ME FOR USER MANUAL
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>