GRANDSTREAM GRP2612-P Carrier-Grade HD IP Phones Installation Guide

: June 4, 2024
: GRANDSTREAM

Table of Contents

GRANDSTREAM GRP2612-P Carrier-Grade HD IP Phones
PRECAUTIONS
OVERVIEW
PHONE SETUP
CONNECTING THE PHONE
PHONE DESCRIPTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GRANDSTREAM GRP2612-P Carrier-Grade HD IP Phones

The GRP2612/GRP2612P/GRP2612G/GRP2612W is not pre-configured to support or carry emergency calls to any type of hospital, law enforcement agency, medical care unit (“Emergency Service(s)”) or any other kind of Emergency Service. You must make additional arrangements to access Emergency Services. It is Your responsibility to purchase SIP-compliant Internet telephone service, properly configure GRP2612/GRP2612P/GRP2612G/GRP2612W to use that service, and periodically test your configuration to confirm that it works as You expect. If You do not do so, it is Your responsibility to purchase traditional wireless or land-line telephone services to access Emergency Services. GRANDSTREAM DOES NOT PROVIDE CONNECTIONS TO EMERGENCY SERVICES VIA THE GRP2612/GRP2612P/GRP2612G/GRP2612W. NEITHER GRAND-STREAM NOR ITS OFFICERS, EMPLOYEES, OR AFFILIATES MAY BE HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS, AND YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING FROM OR RELATING TO YOUR INABILITY TO USE THE GRP2612/GRP2612P/GRP2612G/GRP2612W TO CONTACT EMERGENCY SERVICES, AND YOUR FAILURE TO MAKE ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY SERVICES IN ACCORDANCE WITH THE IMMEDIATELY PRECEDING PARAGRAPH. The GNU GPL license terms are incorporated into the device firmware and can be accessed via the Web user interface of the device at gpl_license. To obtain a CD with GPL source code information please submit a written request to info@grandstream.com

PRECAUTIONS

WARNING: Please DO NOT power cycle the GRP2612/GRP2612P/GRP2612G/GRP2612W during system boot-up or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction.
WARNING: Use only the power adapter included in the GRP2612/GRP2612G/GRP2612W package. Using an alternative non-qualified power adapter may possibly damage the unit.

OVERVIEW

GRP2612/GRP2612P/GRP2612G/GRP2612W is a next-generation enterprise IP Phone featuring 4 dual-color line keys (can be digitally programmed as up to 16 provisional BLF/fast-dial keys), 2.4” (320×240) TFT color LCD, 4 programmable context-sensitive soft keys, 100M network ports (1000M network ports for GRP2612G), integrated PoE (GRP2612P, GRP2612G & GRP2612W only), integrated dual-band Wi-Fi (GRP2612W only), 3-way conference, and Electronic Hook Switch (EHS). The GRP2612/GRP2612P/GRP2612G/GRP2612W delivers superior HD audio quality, rich and leading-edge telephony features, protection for privacy, and broad interoperability with most 3rd party SIP devices and leading SIP/NGN/IMS platforms. GRP2612/GRP2612P/GRP2612G/GRP2612W is the perfect choice for enterprise users looking for a high-quality, feature-rich multi-line executive IP phone with advanced functionalities and performance.

PACKAGE CONTENTS:

PHONE SETUP

*Installing the phone (Wall Mount sold separately):**

Attach the wall mount spacers to the slot for wall mount spacers on the back of the phone.
Attach the phone to the wall via the wall mount hole.
Pull out the tab from the handset cradle (See figure below).
Rotate the tab and plug it back into the slot with the extension up to hold the handset while the phone is mounted on the wall (See figure below).

Installing the phone (Phone Stand) :
For installing the phone on the table with the phone stand, attach the phone stand to the bottom of the phone where there is a slot for the phone stand. (Upper half, bottom part).

CONNECTING THE PHONE

To set up the GRP2612/GRP2612P/GRP2612G/GRP2612W, follow the steps below:

Connect the handset and main phone case with the phone cord.
Connect the 5V DC output plug to the power jack on the phone; plug the power adapter into an electrical outlet. If the PoE switch is used in step 3 (GRP2612P/GRP2612G/GRP2612W only), this step could be skipped.
A network connection is possible via two methods which are described below.
Using Ethernet: – Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a router (LAN side of the router) using the Ethernet cable. Using Wi-Fi (GRP2612W only):
On the LCD menu, navigate to “System→Network→Wi-Fi settings” and enable Wi-Fi.
Select “Scan” and GRP2612W will automatically start scanning within the range.
A list of Wi-Fi networks will be displayed. Select the desired network, and if required, enter the correct password to connect.
The LCD will display provisioning or firmware upgrade information. Before continuing, please wait for the date/time display to show up.
Using the phone-embedded web server or keypad configuration menu, you can further configure the phone using either a static IP or DHCP.

PHONE DESCRIPTION

PHONE CONFIGURATION:
Configure the GRP2612/GRP2612P/GRP2612G/GRP2612W using a Web Browser:

Ensure your phone is powered up and connected to the Internet.
Press and hold the “UP” button for 3 seconds to see the IP address.
Type the phone’s IP address in your PC browser.
Enter the admin’s username and password to access the configuration menu. (The factory default username is “admin” while the default random password can be found on the sticker at the back of the unit).

Configure the GRP2612/GRP2612P/GRP2612G/GRP2612W using the Keypad:

Make sure the phone is idle.
Press the MENU key to access the keypad MENU to configure the phone.
Select MENU → Phone → SIP → Account to configure settings for SIP Proxy, Outbound Proxy, SIP User ID, SIP Auth ID, and SIP Password.
Follow MENU options to configure the basic features of the phone. For example, the IP address if using a static IP. For details, please check GRP2612/GRP2612P/GRP2612G/GRP2612W User Manual.
Please contact your ITSP for additional settings that may be necessary to configure the phone. Refer to online documents and FAQ for more detailed information:
https://www.grandstream.com/our-products This product is covered by one or more of the U.S. patents (and any foreign patent counterparts thereto) identified at www.cmspatents.com.