Youmi G65GA Smart Phone User Guide

Youmi G65GA Smart Phone

Specifications

• Frequency Range:
  • EGSM900: 880-915MHz(TX), 925-960MHz(RX)
  • DCS1800: 1710-1785MHz(TX), 1805-1880MHz(RX)
  • WCDMA 2100: 1920-1980MHz(TX), 2110-2170MHz(RX)
  • WCDMA 900: 880-915MHz(TX), 925-960MHz(RX)
  • LTE Band 1: 1920-1980MHz(TX), 2110-2170MHz(RX)
  • LTE Band 3: 1710-1785MHz(TX), 1805-1880MHz(RX)
  • LTE Band 8: 880-915MHz(TX), 925-960MHz(RX)
  • LTE Band 28: 703-748MHz(TX), 758-803MHz(RX)
  • LTE Band 40: 2300-2400MHz(TX/RX)
  • NR FDD n1: 1920-1980MHz(TX), 2110-2170MHz(RX)
  • EN-DC : DC_8A_n1A
  • B8: 880-915MHz(TX), 925-960MHz(RX)
  • n1: 1920-1980MHz(TX), 2110-2170MHz(RX)
  • 2.4G Wi-Fi: 2412-2472MHz/2422-2462MHz(TX/RX)
  • 5G Wi-Fi: 5150-5250MHz, 5725-5850MHz(TX/RX)
  • Bluetooth/BLE 1M: 2402-2480MHz(TX/RX)
  • BLE 2M: 2404-2478MHz(TX/RX)
  • NFC: 13.56MHz(TX/RX)
  • GPS L1 C/A, BDS B1I, GLONASS G1, Galileo E1: 1559-1610MHz(RX)
  • FM: 87.5-108MHz(RX)
• RF-Output Power:
  • EGSM900: 34.87dBm(GMSK), 27.44dBm(8DPSK)
  • DCS1800: 31.86dBm(GMSK), 25.99dBm(8DPSK)
  • WCDMA 2100: 23.44dBm
  • WCDMA 900: 23.69dBm
  • LTE Band 1: 23.5dBm
  • LTE Band 3: 24.1dBm
  • LTE Band 8: 24.1dBm
  • LTE Band 28: 23.9dBm
  • LTE Band 40: 23.9dBm
  • NR FDD n1: 24.73dBm
  • EN-DC: 24.79dBm
  • 2.4G Wi-Fi: 17.81dBm
  • 5G Wi-Fi: 5150-5250MHz: 15.66dBm, 5725-5850MHz: 13.94dBm
  • Bluetooth: 5.82dBm
  • BLE: 7.40dBm
  • NFC: 24.48dBuA/m @ 3m

Product Usage Instructions

E-label Information Access
To access the e-label information on your device, follow these steps:

1. Go to Settings on your device.
2. Select About phone.
3. Choose Authentication information.

EU Regulatory Information
Frequently Asked Questions (FAQ)

Q: What is the NFC frequency of the device?
A: The NFC frequency of the device is 13.56MHz for both transmission and reception.

Greetings From UMIDIGI Mobile

This guide will show you how to use the phone and its important functions. You may also visit UMIDIG’s official website to get more information about the phone.

Warning

• Security information (including BS, ES, and battery security information) of third-party software r1stallation and function may vary in different regions or by different hardware specifications. UMIDIGI holds a disclaimer for the performance problem or incompatibility caused by third-party applications, registry editing, and OS software modifying. Customizing the OS may cause the device or some applications to fail to work properly.
• Do not place the phone or battery near or inside heating equipment, cooking equipment, or high-ressure vessels (such as microwave ovens, induction cookers, electric ovens, heaters, pressure cookers, water heaters, gas stoves, etc.) to prevent the battery from overheating which may lead to an explosion.
• The original charger, data cable, and battery shall be used. Unapproved chargers, data cables, or batteries that are not certified by the manufacturer may result in electric shock, fire, explosion, or other hazards.
• When charging, please place the device in an environment that has a normal room temperature and good ventilation, it is recommended to charge the device in an environment with a temperature ranging from 5°C~35°C.
• The back cover can’t be removed.

How to Restart the Phone
Press the Power Button for a few seconds until the UMIDIGI restart animation is displayed to restart the phone.

How to Transfer Old Mobile Content to a New Mobile
You can use UMIDIGI Phone to easily transfer photos, videos, music, contacts, messages, apps, etc from your old phone to the new one in the following three approaches.

Google Account Backup and Restore

1. Ensure that both phones are connected to Wi-Fi and have your Google account signed in.
2. On the old phone, go to “Settings” > “System” > “Backup” and ensure that “Back up to Google Drive” is enabled. Back up your data.
3. On the new phone, sign in with the same Google account during setup. Your apps, contacts, calendar events, and some other settings should automatically sync and restore.

Transfer Cable
You can use a USB-C transfer cable to directly connect the old and new phones and transfer data.

Specification

Resolution
Processor| Density 6100+ Octa-Core 2xA76@2.2 GHz + 6xA55 @2.0 GHz

Arm Mali-G57

Memory| 4+4GB Extended RAM

128GB ROM1TB TF Expansion

Battery & Charging| 5000rnAh low charging
Rear Camera| Main Camera Infrared Rear Camera
Front Camera| infrared Front Camera Front Camera
---|---
NFC| Support Google Pay
Hotkey| Yes
Security & Authentication| AlFace Unlock & Side Fingerprint Sensor
SIM Card & TF card| SIM1 + Hybrid(SIM2or MicroSD)
Operating System| Andmid’M 13
In the Box|

• 1x UMIDIGI G6 5G
• 1x Protector Film (applied)
• 1x Phone Case
• 1x Power Adapter 1x SIM Tray Ejector
• 1x USB Type-C to Type-C Cable
• 1xQuic kStart. Guide

Thanks for choosing UMIDIGI products!
We will always focus on innovation and continue to provide high-quality smart devices for a better user experience. Please leave us a review of feedback if you like it. We do appreciate it. Follow UMIDIGI:

• YouTube: youtube.com/umidigi
• VK : vk.com/umidigi 
• Facebook : facebook.com/umidigi
• Twitter : twitter.com/umidigi
• Instagram : instagram.com/umidigi

Safety Statement

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISEDC Warning
Operation of 5150-5250 MHz is restricted to indoor use only. This device complies with Innovation, Science, and Economic Development Canada license- exempt RSS standard(s) . Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Specific Absorption Rate(SAR) information
SAR tests are conducted using standard operating positions accepted by the FCC/ISED with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. Before a new model phone is available for sale to the public, it must be tested and certified to the FCC/ISED that it does not exceed the exposure limit established by the FCC/ISED, tests for each phone are performed in positions and locations as required by the FCC/ISED. For body-worn operation, this model phone has been tested and meets the FCC/ISED RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 10mm from the body. Non-compliance with the above restrictions may result in a violation of RF exposure guidelines.

EU Regulatory Information

In all EU member states, the operation of 5150-5250MHz is restricted to indoor use only.

Manufacturer
Shenzhen Youmi Intelligent Technology Co., Ltd
Add, 406-407 Jinqi Zhigu Building,4/F, 1 Tangling Road, Nanshan District, Shenzhen City, Guangdong Province China

Made ln China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>