KRAMER KDock-4 USB-C Hub Multiport Adapter Installation Guide
- June 6, 2024
- Kramer
Table of Contents
KRAMER KDock-4 USB-C Hub Multiport Adapter Installation Guide
For the latest information on our products and a list of Kramer distributors,
visit our
Web site where updates to these installation instructions may be found.
We welcome your questions, comments, and feedback.
Introduction
Congratulations on purchasing your Kramer KDock-4 USB-C Hub Multiport Adapter.
KDock-4 USB-C Hub Multiport Adapter supports HDMI™, DP and VGA video outputs
for up to three displays, 3 USB ports, 1 USBC port, and SD & Micro SD card
readers. It is specially designed to support a mobile device
on top. it is an ideal accessory for MacBook, laptops equipped with USB
Type-C, mobile phones, and tablets.
For small host devices (e.g., phones and tablets), open the flip-up device holder.
Get to Know Your KDock-4
| # | Feature | Function |
|---|---|---|
| 1 | 3.5mm Mini Jack | Connect to headphones. |
48K/44.1KHz audio stereo sampling rate.
2| VGA Connector| Connect to a VGA acceptor.
3| SD| SD support read/write transmission speed up to 832Mbps (104MB/s).
Version: 3.0/2.0.
4| microSD| microSD support read/write transmission speed up to
Speed: 832Mbps (104MB/s). Version: 3.0/2.0.
5| Ethernet RJ-45 Connector| Ethernet RJ-45 Connector – To directly connect
your mobile device or laptop to the Ethernet with an RJ-45 1000M
(Gigabit)/100M/10M cable.
6| 2 USB-A 3.0 Connector| Charging: BC1.2 (5V 1.5A) . Speed: 5.0Gbps
(640MB/s).
7| USB-A 2.0 Connector| Speed: 480Mbps (60MB/s).
8| 4K DP Connector| Connect to a DP acceptor.
9| 4K HDMI Connector| Connect to an HDMI acceptor.
10| USB-C Female| Power pass through 100W (5V/1A-20V/5A) fast charge.
Insert a device with a type C (male) plug into the type C port (to recharge
it).
11| USB-C Male| Connect to host (PC, phone, or tablet).
Technical Specifications
| Inputs | 1 USB | On a male USB-C connector. |
|---|---|---|
| Outputs | 1 VGA | On a female 15-pin HD Connector. |
- 1920x1080P@60Hz when a single display is attached to the device.
- 1920x1080P@60Hz when two displays are attached to the device.
- 1280x720P@60Hz when three displays are attached to the device.
Backwards compatible with lower resolutions.
1 HDMI| On a female HDMI connector.
- 3840x2160P@30Hz when a single display is attached to the device.
- 1920x1080P@60Hz when two displays are attached to the device.
- 1280x720P@60Hz when three displays are attached to the device.
Backwards compatible with lower resolutions.
1 DP| On a female DisplayPort connector.
- 3840x2160P@30Hz when a single display is attached to the device.
- 1920x1080P@60Hz when two displays are attached to the device.
- 1280x720P@60Hz when three displays are attached to the device.
Backwards compatible with lower resolutions.
Ports| 4 USB| 2 female USB-A 3.0 connectors for USB link extension.
1 female USB-A 2.0 connector for USB link extension.
1 female USB-C connector for charging.
1 Ethernet| On an RJ-45 connector.
1 SD| On an SD card port.
1 microSD| On a microSD card port.
Video| Max Bandwidth| 10.2Gbps (3.4Gbps per graphic channel).
Max Resolution| 3840x2160P@30Hz resolution.
Compliance| HDMI and HDCP 1.4.
Extended Ethernet| Max Transmission Bandwidth|
- 1000M (Gigabit)/100M/10M.
- Includes Wake-on-LAN (WoL).
- Single Mac address.
- PXE boot.
Power| Consumption| 100W.
Environmental Conditions| Operating Temperature| 0° to +40°C (32° to 104°F).
Storage Temperature| -10° to +55°C (14° to 131°F).
Humidity| 5% to 90%, RHL non-condensing.
Regulatory Compliance| Safety| CE.
Environmental| RoHs, FCC.
Enclosure| Type| Aluminum with built-in 20cm/7.87″ flexible USB-C cable.
General| Net Dimensions| 26.0cm x 9.0cm x 2.5cm (10.2″ x 3.5″ x 1.0″).
Net Weight| 361g (0.8lbs) approx.
Specifications are subject to change without notice at www.kramerav.com
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.