WilTec 61973 Universal Foldable Saw Horse with Chainsaw Holder Instruction Manual
- June 2, 2024
- wiltec
Table of Contents
WilTec 61973 Universal Foldable Saw Horse with Chainsaw Holder
Read and follow the operating instructions and safety information before using it for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical
data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities,
please contact us.
The information contained in this document may alter at any time without
previous notice. It is prohibited to copy or spread any parts of this document
in any way without prior written allowance. All rights reserved. The WilTec
Wildanger Technik GmbH cannot be held accountable for any possible mistakes in
this operating manual or the diagrams and figures shown. Even though the
WilTec Wildanger Technik GmbH has undergone the biggest possible efforts to
ensure that the operating manual is complete, faultless, and up to date,
mistakes cannot be entirely avoided. If you should find a mistake or wish to
suggest improvement, we look forward to hearing from you.
Send an e-mail to: service@wiltec.info
or use our contact form: https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in
our online shop via: https://www.wiltec.de/docsearch
Our postal address is: WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the
following address. Attention! To allow for a smooth execution of your
complaint or return, it is important to contact our customer service team
before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients take some basic safety precautions when using this device. Please read the operation instructions carefully and make sure you have understood its content. Keep these operation instructions safe.
Safety precautions
- Follow all safety notes and information stated in this manual. You should be familiar with the operating manual and the included safety notes and instructions before operating the chainsaw.
- Non-compliance with safety notes can lead to serious injury.
- Wear adequate protective equipment. Do not wear any loose clothing or jewelry and bind long hair together.
- Always wear protective glasses when using the chainsaw, to protect the eyes from any wood splinters. Additionally wear hearing protection, safety shoes, and sturdy working gloves with a cut-resistant insert.
- If possible, only use straight pieces of wood.
- The maximal blade length of the chainsaw is allowed to be 45 cm. Longer chainsaw blades will exceed the safety guard.
- Ensure that the aeration is adequate when using a motorized chainsaw.
- Make sure that the blade of chainsaws with cable conduit never touch the electricity cable.
- Ensure that your workspace is illuminated sufficiently.
- The chainsaw may not be operated if you are under the influence of alcohol, drugs, or other medicines which can influence your perception.
- At all times keep your hands away from the saw blades!
Safe handling of the saw horse with chainsaw holder
- Place the wood onto the saw horse and push it to the measuring rod. Hold the piece of wood with the left hand, and keep the hand at a safe distance far from the chainsaw blade.
- The surface of the saw horse is designed for a maximum length of 1.8 meters and a maximum diameter of 25–30 cm. The maximum allowed weight load of the saw horse is 120 kg.
- The chainsaw holder of the saw horse is not suitable for chainsaws with a blade length of more than 45 cm.
- The hinged clamp and the safety guard need to be disengaged if the chainsaw is used without the saw horse.
- The hinge clamp and the holder always need to be lubricated sufficiently.
- The saw horse may only be used on even surfaces.
- Ensure that the nuts and screws of the hinge clamp and the safety guard are always tightened.
- When using a chainsaw with the saw horse it is important to comply with all safety regulations and practices of the chainsaw manufacturer.
Assembly
Hinge clamp holder and measuring bar
- Push the hinge holder (1) (vertically adjustable) together with the holder of the measuring bar (2) (horizontally adjustable) into the top surface of the saw horse.
- Use the washers and bolts included in the delivery for this purpose.
- The vertical setting of the hinge clamp holder is used to hold chainsaws of various sizes.
- The bigger and longer the chain is, the higher the hinge the clamp should be placed Adjust it, so that the tip of the chainsaw exceeds the loading surface, enabling it to cut the log into two pieces.
- The measuring bar can be adjusted horizontally to enable every log to be cut into the desired length.
Hinge clamp
- Push the bar of the hinge clamp (2) into the cylinder of the supporting hinge clamp and secure it with the R-clip (1).
- Carefully place the chainsaw blade in between the solid blocks of the hinge clamp (2). Ensure 2 cm (1) between the body of the chainsaw and the clamp.
- Position the chain guard above the upper bar (1) of the swivel clamp (2).
- Tighten the protection bar with the screw and nut included in the delivery.
- The safety guard needs to be moved as required until a position has been reached in which the safety guard is away from the chain. Then tighten the bolt again and check its clearance.
Parts list
Exploded view
Technical specifications
Important notice
The reprint or reproduction, even of excerpts, and any commercial use, even in
part, of this instruction manual requires the written permission of WilTec
Wildanger Technik GmbH.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>