Yusin YS-02 Explore Mysetry User Manual

June 2, 2024
Yusin

YS-02 Explore Mystery
User Manual Explore Mysetry
(YS-02) Manual

YS-02 Explore Mystery

1、Scan the QR code above to download and install “YSLCAM”

Yusin YS 02 Explore Mysetry - qr codehttp://120.25.194.109/files/down/YSLCAM/index.html

  1. IOS system users directly jump to the APP Store to download and install
  2. Android users can download the corresponding domestic and foreign options through the option, as shown in the figure ![Yusin YS 02 Explore Mysetry - permissions](https://manuals.plus/wp-content/uploads/2024/03 /Yusin-YS-02-Explore-Mysetry-permissions.png)

Product use steps are as follows:

  • Press and hold the power button for 3 seconds, the lens light flashes to indicate that the device is turned on and not connected to the phone。

  • Connect the device WIFI “YSMS*****”, the default password “12345678”, the lens light is always on when the connection is successful。

  • After the connection is successful, the real-time video will be displayed, and you can perform operations such as recording, taking pictures, sharing, checking the power of the device, and changing the password online.。

  • If you forget the password and cannot connect, when the device is turned on, press the WIFI button four times in quick succession to reset to the default password.
    Code “12345678”, it will take effect after restarting the device。

  • Press and hold the power button for 3 seconds to turn off the device。

Product size:

length 185mm, diameter 30mm, weight 100g。

Light status

  • Camera white light flashes
    Charging status/power-on disconnected status

  • Camera white light is always on
    Fully charged / powered on and connected

Button Basic Function

⚫  1; long press in the power-on state (to control WIFI on/off)

⚫  2;Short press to increase the vibration intensity↑

⚫  3;Long press (on/off), short press when powered on (vibration mode switching)

⚫  4;Short press to weaken the vibration intensity , long press to pause the vibration.

Yusin YS 02 Explore Mysetry - permissions1

FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there  is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is  encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals