Alphalite CBW-4L(40S2) CBW Series 4FT Wattage Adjustable Instructions
- June 4, 2024
- Alphalite
Table of Contents
Alphalite CBW-4L(40S2) CBW Series 4FT Wattage Adjustable
Installation Instructions
Installation guide valid for the following models: CBW-4L(40S2)
WARNING RISK OF FIRE OR ELECTRIC SHOCK
The LED Curved-Basket Linear Wrap Luminaire must be installed by a qualified
electrician in accordance with applicable federal, state, and local laws and
codes. Installation requires knowledge of luminaire electrical systems and
installer should be familiar with the operation of this product. If not
qualified, do not attempt installation; contact a qualified electrician.
Manufacturer assumes no responsibility for the improper installation of this
luminaire. When installing the fixture, drilling may damage luminaire wiring
and electrical parts. Check for wiring and components in enclosure before
drilling.
WARNING
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet
metal or other sharp objects. When installing this kit, drilling may damage
luminaire wiring and electrical parts. Check for wiring and components in
enclosure before drilling.
WARNING RISK OF PERSONAL INJURY
Wear gloves or proper handling protection to prevent cuts or abrasions when
handling and maintaining this product. This equipment may have sharp edges. To
reduce the risk of death, personal injury or property damage from fire,
electric shock, falling parts, cuts/abrasions, and other hazards read all
warning and instructions included with and on the fixture box and all fixture
labels.
WARNING
Suitable for Damp locations. Do not touch LEDs with hands or tools.
Mishandling of LED can lead to product failure.
WARNING
RISK OF PERSONAL INJURY, FIRE OR ELECTRIC SHOCK
Turn OFF power before installation.
Contact manufacturer with any questions or concerns regarding installation of
this luminaire.
Chain Suspended Installation Steps
- Mount V-hooks to the luminaire.
- Mount plastic trims to the lens.
- Install the lens by hanging from end plate pins of the luminaire and rotate into position. Flex the lens to engage end plate pins on opposite side of the luminaire.
- Connect the wires to the AC power grounding leads and make sure the wires to be unclosed into the flexible metallic conduit.
CAUTION
- Avoid direct eye exposure to the light source while it is on.
- Account for small parts and destroy packing material, as these may be hazardous to children
- Disconnect power and allow fixture to cool before changing bulb or handing fixture.
LED Curved-Basket Linear Wrap Luminaire
- Remove the lens and Led module plate.
- For mounting, using the provided mounting holes on each end of the fixture housing.
- Make electrical connections according to code.
- Install the lens by hanging from end plate pins of the luminaire and rotate into position.
Flex the lens to engage end plate pins on opposite side of thel uminaire. See A for details
Wiring Diagram:
0-10V Dimmable Wiring
Follow the wiring directions as in fig. 1.
- Connect the black fixture lead to the (+) LINE supply lead.
- Connect the white fixture lead to the (-) COMMON supply lead.
- Connect the GROUND wire from fixture to supply ground. Do NOT connect the GROUND of the dimming fixture to the output.
- Connect the purple fixture lead to the (V+) DIM lead.
- Connect the gray fixture lead to the (V-) DIM lead.
ON-OFF Wiring
Follow the wiring directions as in fig. 1.
- Connect the black fixture lead to the LINE supply lead.
- Connect the white fixture lead to the COMMON/NEUTRAL supply lead.
- Connect the GROUND wire from fixture to supply ground.
Pendant Mount Installation Steps
- Install the boom box on the boom.
- Screw the lamp to the boom box.
- Wire to mian power.
- Install boom box cover.
- The installation is complete.
10715 Springdale Ave, Ste 4, Santa Fe Springs, CA 90670 l
Tel: 1-888-287-9228 l Fax:
1-888-258-9183 l
E-mail: support@alphalite.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>