Lanxin X3 Bluetooth Earphone User Manual
- June 2, 2024
- Lanxin
Table of Contents
BLUETOOTH HEADSET
INTRODUCTION
Dear users, thank you for purchasing our products. In order to better understand the product, please read this manual carefully before use. Have a good experience.
PRODUCT INTRODUCTION
PRODUCT PARAMETER
| Product model | X3 | Transmission distance | 101v1 |
|---|---|---|---|
| Chip version | V5.3 | Charging time | 1-2 hours |
| Horn size | cl)16 | Endurance time | 6-7hours |
| Frequency response | 50Hz-20kHz | Standby time | 100 days |
| Charging bay battery capacity | 400mah | Headphone battery capacity | 50mah |
FUNCTIONAL OPERATION
Music playback
Play/Pause music: Double click
Previous: Three blows to the left ar
Next: Three stikes on the right ear
Volume minus: Clck left ear
Sound Plus: Click the ight ear
Call management
LED INDICATOR
Call Double-click: Answer the call or hang up the call
Reject a call: Hold down a call for 2 seconds.
Auxiliary function
(Game/Music: Press and hod right are for 2 seconds Voice Assistants Press and
hold th left ea or 2 seconds 10 access the voice assistant
Language switch: After starting up, click 4 times to switch between
Chinese and English, and you need to have an Engiish and Chinese prome tone.
LED INDICATOR
Charging status: headset charging indicator white light is steady on, full
light is off.
Pairing status: The white indicator is blinking.
Disconnected phone status: The main ear indicator is blinking, and the
secondary ear indicator is off.
Music status : The phone is connected successfully, and the indicator i
of.
Calstatus: The indicator s off.
‘Game mode: White light breathing light effect
Low battery mode: The white indicator blinks and the voice prompts.
FIRST USE
Before using for the firs time, please confim that the power of the two
earphones and the charging compartment i full. If the powers insuficient,
please use the data cable equipped with this product o charge, and choose the
charging equipment produced by the regular manufacturer through the national
CCC certfication. f the product has not been used for more than 2 weeks, it is
recommended to charge the product before use.
ON/OFF
Automatic power on: After opening the cover of the charging compartment, take
out the headset and turn on automaticaly.
Automatic shutdown: Put the earphones back in the charging compartment, and
the earphones willdisconnect the Bluetooth connection and automaticaly shut
down.
BLUETOOTH PAIRING CONNECTION
Bluetooth pairing: The headset starts to enter the pairing state, and the
Bluetooth device Searches for the headset pairing name “X2” and clicks the
connection pairing completion. (If you can’tfind Bluetooth, turm it off and
turn it on o reconnect]f the connection is successful, an announcement is
played Automatic connect back: After th first connection isuccessful, the last
device is connected by defautt
EARPHONE POWER AND CHARGING
Earphone battery display
Mobile phone status bar can display headset device battery information (the
mobile phone version needs to support this function)
Earphone charging state
During the charging procss o the headset, th indicator light will ave a
charging eminder,and the ndicator light wil be turned off aftr it ful.
Headset low battery reminder
When the earphone i in the low battery state, the earphone will have an
announcement indicating that the battery is low. Please put the earphone into
the charging bay to charge it i time.
CHARGING BIN POWER AND CHARGING
Charging bin power display
‘Turn on the digital display inside the charging bin to display real-time
power Bin charging
It recommended o use standard charger and the inluded charging cable to charge
the chargin bay.
Charging bin low power reminder
When the charging bin digital display shows that the power i too low, please
charge the charging bin in time
MATTERS NEEDING ATTENTION
- Do not disassemble, repair or modify the headset for any reason, otherwise it may cause fire, electronic breakdown or even complete damage to the product.
- Do not place the product in an environment where the temperature is too low or too high (below 0°C or above 45°C).
- Do not use the device during thunderstorms. This may cause device failure or electric shock.
- Do not use strong chemicals, cleaning agents or strong detergents to clean the equipment or its accessories.
- Do not place the device near heat sources or exposed fire sources, such as electric heaters, microwaves, ovens, water heaters, candles, or other places that may produce high temperatures.
- Do not listen to music at a high volume for a long time to cause hearing damage. Please adjust the volume when using the device.
- Do not replace the battery by yourself. This device is equipped with a non-removable built-in battery to avoid damage to the battery or device. Private replacement is not recommended.
- Before cleaning and maintenance, stop using the device, close all applications, and disconnect all connections or cables from other devices.
WARNING!
- Do not disassemble, impact, squeeze the battery or put it into the fire or insert foreign bodies to avoid overheating, fire or explosion of battery leakage.
- This device is not a toy, and children should use this device under adult supervision.
- If there is serious swelling, do not continue to use.
- Do not place in high temperature environment, away from fire source.
- Do not use the battery after it is immersed in water or other liquids.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2)this device must
accept any interference received, including interference that may cause
undesired operation. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
RF Exposure Information
The device was evaluated to meet general RF exposure requirements. This
equipment should be installed and used with a minimum distance of 0 mm between
the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>