RYOBI PCL733 Cordless 1 Gal Wet Dry Vacuum Instruction Manual
- June 2, 2024
- RYOBI
Table of Contents
RYOBI PCL733 Cordless 1 Gal Wet Dry Vacuum
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
When using an electrical appliance, basic precautions should always be
followed, including the following:
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious personal
injury.
READ ALL INSTRUCTIONS BEFORE USING READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
WARNING!: To reduce the risk of electric shock DO NOT expose to rain. Store indoors.
- Dress properly. Do not wear loose clothing or jewellery. Contains long hair. Keep your hair, loose clothing, fingers, and all parts of the body and clothing, away from openings and moving parts. Loose clothes, jewellery, or long hair can be caught in internal moving parts.
- Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better control of the wet/dry vac in unexpected situations. Do not use it on a ladder or unstable support.
- Use safety equipment. Dust mask must be used for appropriate conditions.
- Do not allow children to operate the product or play with the product as a toy. Close attention is necessary when used by or near children.
- Use this product ONLY for its intended use as described in this manual. Use only the attachments recommended in this manual.
- If the product is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return to your nearest service centre.
- Do not handle charger plug or product with wet hands.
- Do not put any objects in ventilation openings. Do not use any opening blocked. Keep openings free of dust, lint, hair, and anything that may reduce airflow.
- NEVER vacuum materials that are burning or smoking, such as hot coals, cigarette butts, matches, burning or smoking ashes, etc.
- DO NOT use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
- Do not use it for dry vacuuming without a filter in place.
- Use extra care when using stairs.
- Do not incinerate this appliance even if it is severely damaged. The batteries can explode in a fire.
- The product does not have to be plugged into an electrical outlet, therefore it is always in operating condition. Be aware of possible hazards when using the product or when changing accessories.
- Remove the battery when the vacuum is not in use and before servicing.
- Use the battery only with the charger listed. For use with 18 V lithium-ion battery packs, see tool/appliance/battery pack/charger correlation supplement 987000-432. Do not use a charger outdoors.
- Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
- When the battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire.
- Always remove the battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing the battery pack will prevent accidental starting that could cause serious personal injury.
- Do not use a battery pack or power tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
- Do not modify or attempt to repair the power tool or battery pack that has been damaged.
- To reduce the risk of serious personal injury, never use or expose a battery pack or any cordless product in the presence of an open flame or temperature above 265°F. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.
- Prevent unintentional starting. Ensure the switch is in the off-position before connecting to the power source and/or battery pack, picking up or carrying the product. Carrying battery products with your finger on the switch or energizing battery products that have the switch on invites an accident
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts the eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.
- Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the product’s operation. If damaged, have the product serviced before use. Many accidents are caused by poorly maintained products.
- Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one product may create a risk of injury when used on another product.
- Do not let gasoline, oils, petroleum-based products, etc., come in contact with plastic parts. They contain chemicals that can damage, weaken, or destroy plastic.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Appliance is intended for household use only.
- This product contains no serviceable parts.
- Save these instructions. Refer to them frequently and use them to instruct others who may use this product. If you loan someone this product, loan them these instructions also.
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL| SIGNAL| MEANING
| DANGER:| Indicates a hazardous situation, which, if not avoided, will
result in death or serious injury.
| WARNING:| Indicates a hazardous situation, which, if not avoided,
could result in death or serious injury.
| CAUTION:| Indicates a hazardous situation, that, if not avoided, may
result in minor or moderate injury.
| NOTICE :| (Without Safety Alert Symbol) Indicates information
considered important, but not related to a potential injury (e.g. messages
relating to property damage).
This is a “household type” product which means it is intended for household use.
ASSEMBLY
WARNING:
Do not use this product if it is not completely assembled or if any parts
appear to be missing or damaged. Use of a product that is not properly and
completely assembled or with damaged or missing parts could result in serious
personal injury
WARNING
Do not attempt to modify this product or create accessories or attachments not
recommended for use with this product. Any such alteration or modification is
misused and could result in a hazardous condition leading to possible serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance. In Mexico, please call 01-800-843-1111.
OPERATION
WARNING
Do not allow familiarity with this product to make you careless. Remember that
a careless fraction of a second is sufficient to inflict serious injury.
WARNING
Always remove the battery pack from the tool when you are assembling parts,
making adjustments, cleaning, or when not in use. Removing the battery pack
will prevent accidental starting that could cause serious personal injury.
WARNING
Always wear eye protection with side shields marked to comply with ANSI Z87.1.
Failure to do so could result in objects being thrown into your eyes and other
possible serious injuries.
WARNING
Do not use any attachments or accessories not recommended by the manufacturer
of this product. The use of attachments or accessories not recommended can
result in serious personal injury.
WARNING
NEVER IMMERSE OR EXPOSE YOUR BATTERY PACK TO CORROSIVE OR CONDUCTIVE FLUIDS OR
ALLOW THESE FLUIDS TO FLOW INSIDE THE BATTERY PACK.
APPLICATIONS
- You may use this product for the following purpose:
- Light-duty vacuuming of wet or dry surfaces
OVERVIEW
- A – Collection container
- B – Storage clips
- C – Flexible hose
- D – Crevice tool
- E – Exhaust/blower port
- F – Locking latches
- G – Lid
- H – Dry use filter
INSTALLING/REMOVING THE FLEXIBLE HOSE
- A – Vacuum port
- B – Flexible hose
- C – Raised locking tab
- D – Slot
- Align the raised locking tab on the end of the flexible hose with the slot on the vacuum port. Push in and twist counterclockwise to lock.
- Insert the tapered end of the flexible hose into an accessory.
- To disassemble, remove the accessory from the flexible hose.
- Rotate the other end of the flexible hose clockwise to unlock and pull away from the vacuum port.
INSTALLING/REMOVING BATTERY PACK
- A – Battery pack
- B – Depress latches to release battery pack
- Set the ON/OFF switch to the OFF position.
- Insert the battery pack into the product as shown.
- Make sure the latches on each side of the battery pack snap into place and that the battery pack is secured in the product before beginning operation.
- Depress the latches to remove the battery pack.
- For complete charging instructions, see the operator’s manuals for your battery pack and charger.
STARTING/STOPPING THE WET/DRY VAC
- A – ON/OFF switch
- B – On
- C – Off
WARNING
To reduce the risk of fire or explosion, do not leave the product running
unattended. Immediately stop the unit if it shows signs of abnormal operation
such as loss of suction, liquid or debris in the exhaust, or any abnormal
motor noises.
- To start the wet/dry vac: press the ON/OFF switch to the ON position.
- To stop the wet/dry vac: press the ON/OFF switch to the OFF position.
INSTALLING/REMOVING ATTACHMENTS
- A – Flexible hose
- B – Crevice tool
Vacuuming can be performed with only the flexible hose or the hose with vacuum attachments.
- Turn off the wet/dry vac.
- Insert the attachment onto the tapered end of the flexible hose, making sure the attachment is firmly in place.
- To remove, hold the attachment and pull from the hose.
DRY VACUUMING
Vacuum only items small enough to fit through the hose or the attachment. When
vacuuming, make sure that the dry-use filter stays in place. The performance
of the wet/dry vac will decrease with a full collection container. When
emptying the collection container, check to see if the dry-use filter needs
replacing.
NOTE: The wet/dry vac is shipped ready for dry-use vacuuming. To equip
the wet/dry vac for wet use, remove the dry use filter.
CAUTION
In low relative humidity conditions, vacuuming fine debris with the wet/dry
vac can cause a static charge resulting in static shock. To reduce static
shock while using, add moisture to the air with a humidifier
WET-VACUUMING
When wet vacuuming, be aware that the wet/dry vac is equipped with a water float inside the filter unit housing. This water float is designed to shut off the suction when the collection container reaches full wet capacity. When the collection container is full, turn the wet/dry vac OFF and empty the collection container as shown in Maintenance.
- Unlock the locking latches and remove the lid.
- Remove the dry-use filter by rotating the filter counterclockwise to unlock and pull the filter free of the filter housing.
- Replace lid and lock securely.
WARNING
When vacuuming liquid, make sure the canister vac does not get submerged or
doused in liquid, which could cause shock, vacuum failure, or personal injury
USING THE WET/DRY VAC AS A BLOWER
- A – Exhaust/blower port
- B – Flexible hose
At all times, the wet/dry vac blows air through the blower port as part of the exhaust system. However, you can use the wet/dry vac as a blower by attaching the hose to the exhaust/blower port.
- Turn off the wet/dry vac and remove the battery pack.
- Remove the hose from the vacuum port.
- Remove any nozzles from the hose if attached.
- Push the tapered end of the flexible hose into the exhaust/blower port to use as a blower.
- To remove the flexible hose, pull the tapered end of the flexible hose from the exhaust/blower port.
To keep from scattering debris, blow around the outer edges of a debris pile.
Never blow directly into the centre of a pile.
Use rakes and brooms to loosen debris before blowing. In dusty conditions,
slightly dampen surfaces when water is available.
Watch out for children, pets, open windows, or freshly washed cars, and blow
debris safely away.
After using blowers or other equipment, CLEAN UP! Dispose of debris properly.
MAINTENANCE
WARNING
When servicing, use only identical replacement parts. Use of any other part
could create a hazard or cause product damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are
susceptible to damage from various types of commercial solvents and can be
damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING
Do not at any time let brake fluids, gasoline, petroleum-based products,
penetrating oils, etc., come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which could result in serious personal
injury.
WARNING
NEVER IMMERSE OR EXPOSE YOUR BATTERY PACK TO CORROSIVE OR CONDUCTIVE FLUIDS OR
ALLOW THESE FLUIDS TO FLOW INSIDE THE BATTERY PACK.
REMOVING WASTE FROM THE COLLECTION CONTAINER
- A – Locking latches
- B – Dry use filter
- C – Lid
- D – Collection container
- E – Dry waste
- A – Locking latches
- B – Lid
- C – Collection container
- D – Wet waste
The collection container should be checked, emptied, and cleaned periodically to obtain maximum efficiency.
Dry waste
- Remove the battery pack.
- Unlock the locking latches and remove the lid.
- Remove the dry-use filter.
- Inspect the filter, lightly shake any dust or dirt from the filter, or replace it as necessary.
- Empty the collection container; wash out if necessary.
- Reinstall dry dry-use filter.
- Before replacing the lid, make sure all pieces are completely dry.
- Replace the lid and lock securely.
Liquid waste
- Remove the battery pack and store it away from the container to avoid liquid entering the battery pack.
- Unlock the locking latches and remove the lid.
- Empty the collection container; wash out if necessary. Before replacing the lid, make sure all pieces are completely dry.
- Replace the lid and lock securely
CAUTION
Do not allow liquid pick-up to remain in the collection container for extended
periods. Moisture can develop in the motor compartment and shorten the life of
the motor.
CAUTION
Do not turn the unit upside down, as the liquid may enter the motor unit.
CLEANING/REPLACING THE DRY-USE FILTER
- A – Raised locking tab
- B – Dry use filter
- C – Slot
- D – To remove
- E – To install
- Remove the battery pack.
- Unlock the two locking latches and remove the lid.
To clean
- Remove the dry-use filter by rotating the filter counterclockwise to unlock and pull the filter free of the filter housing.
- Lightly shake any dust or dirt off the filter.
- Reinstall the filter by aligning the raised locking tabs on the filter with the slots on the filter housing on the underside of the lid. Rotate the filter clockwise to lock into place.
NOTE: Make sure the filter is seated properly for dry vacuuming. Remove the filter for wet vacuuming.
To replace
- Remove the dry-use filter by rotating the filter counterclockwise to unlock and pull the filter free of the filter housing.
- Replace with new filter by aligning the raised locking tabs on the filter with the slots on the filter housing on the underside of the lid. Rotate the filter clockwise to lock it into place.
- NOTE: Make sure the filter is seated properly for dry vacuuming. Remove the filter for wet vacuuming.
- When purchasing a replacement filter, request the recommended part number 312711001 (Model number A32VC05).
STORAGE
- Clean all foreign material from the wet/dry vac.
- Clean the outside of the collection container with warm water and mild soap.
- Empty and clean the collection container, flexible hose, nozzles, and attachments with warm water and mild soap and allow it to completely dry before storage.
- Store flexible hoses and attachments inside the collection container or on the lid.
- The collection container should be disinfected as needed and before prolonged storage.
- Store indoors in a place that is inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.
The wet/dry vac is compatible with the Ryobi LINK modular storage system. Please refer to the storage system operator’s manual for instructions on how to store using the system.
CONTACT
- To request service, purchase replacement parts,
- locate an Authorized Service Center or obtain Customer or Technical Support:
- Visit www.ryobitools.com or call 1-800-525-2579
- If any parts or accessories are damaged or missing, do not return this product to the store.
- Call 1-800-525-2579 for immediate service.
- Please obtain your model and serial number from the product data plate.
This product is covered under a 3-year Limited Warranty. Proof of purchase is required.
- MODEL NUMBER* ___ SERIAL NUMBER ____
- The model number on the product may have additional letters at the end. These letters designate manufacturing information and should be provided when calling for service.
TTI CONSUMER POWER TOOLS, INC.
- P.O. Box 1288, Anderson, SC 29622
- Phone 1-800-525-2579
- États-Unis, Téléphone 1-800-525-2579
- USA, Teléfono 1-800-525-2579
- www.ryobitools.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>