ZSQ B0BZ3X31T2 Sideboard with 4 Doors Large Storage Space Buffet Cabinet Instruction Manual

ZSQ B0BZ3X31T2 Sideboard with 4 Doors Large Storage Space Buffet Cabinet

Thank you

Thank you for purchasing this quality product. Be sure to check all packing material carefully for small Hardware which may have come loose inside the carton during shipment. Identify and count all hardware and compare with the hardware list below

ASSEMBLY INSTRUCTION

1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior start of assembly.
3. Please follow attached instruction in the same sequence as numbered to assure fast and easy.

WARNING!

1. Don’t attempt to repair or modify parts that are broken or defective. Please contact the store immediately.

2. This product is for home use only and not intended for commercial establishments.

3. Two persons are required for assembly.

4. Approximate assembly time: 1/2 hours

5. Component parts and fittings contained in the box.
   Please sort out all parts before you begin to assemble the item.
   This is to make sure you always use the correct part

6. It is STRONGLY RECOMMENDED that you ANCHOR this product.
   Toppling furniture can cause serious injuries and death.

This product has not been fitted with an anchor strap.
To prevent your furniture from tipping forward it is strongly recommended that you securely attach this product to a wall or other solid surface, using the anchor straps provided and appropriate fixings.

Tools Required

• ED: Phillips Screwdriver

• Wall Drill

• Hammer

Hardware List

1. x1
   Top panel

2. x1
   Left side panel

3. x1
   Middle panel

4. x1
   Right side panel

5. x1
   bottom panel

6. x1
   front panel

7. x1
   rear panel 1

8. x1
   rear panel 2

9. x1
   Shelf panel

10. x1
    Left door panel

11. x1
    Right door panel

12. x1
    Back panel

Parts

1. x8
   Cam-bolts

2. x8
   Cam-locks

3. x4
   Hinges
   

4. x4
   Screws
   

5. x48
   handle bolts
   

6. x8
   Handles

7. x4
   Dowels
   

8. x12
   Dowels

9. x8
   Bolts

10. x12
    Bolts

11. x12
    Flat Washer

12. x12
    Spring Washer

13. x1
    Allen Key

14. x4
    Screws
    

15. x24
    Screws

16. x4
    Hook

17. x4
    Anchor

18. x2
    Plastic tie
    

19. x4
    Screws
    

20. x4
    Screws

21. x4
    increase and decrease below

22. x16
    Shelf supports

ASSEMBLY INSTRUCTIONS

Place the Cabinet in the desired location against the wall.
Mark the position of the attached Hooks on the wall and remove the Cabinet. Using one of the remaining Hooks (P) as a template, Place the Hook (P) under the marks on the wall and mark the two hole positions. Drill the holes for the Anchors (R) and insert the Anchors (R) into the wall. Attach the remaining Hooks (P) to the Anchors (P) with Screw (U). Fully tighten the screws. Return the Cabinet to the selected position and connect the Hooks (P) together with Plastic Tie (S). Assembly is now complete.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>