AETEK E59-101 Gigabit PoE Extender Installation Guide
- June 2, 2024
- AETEK
Table of Contents
AETEK E59-101 Gigabit PoE Extender
Specifications:
- Models: E59-101, E59-102, E59-602, E69-101, E69-102, E69-201,E69-202, E69-602
- Description:
- E59 Series: Indoor PoE Extenders
- E69 Series: Outdoor PoE Extenders
- Installation Guide: Quick Installation Guide
- Part Number: A625010002G
Product Usage Instructions
Important Notes:
- Install the device in a ventilated and dry place free of electromagnetic sources, vibration, moisture, and dust.
- Ensure ventilation openings on the extender are not blocked.
- Use CAT.5e or 6 UTP/STP cables to prevent cabling distance limitations.
Connection:
Follow these conditions for cabling:
- Use 18~19, 24AWG CAT.5e cables.
- Ensure combined bandwidth consumption does not exceed the uplink bandwidth from the PoE switch.
Installation:
E59-101:
- PoE Input connects to PoE Switch
- PoE OFF/ON Switch
- Ground screw – ensure grounding resistance is lower than 0.5
E59-102:
- PoE Input connects to PoE Switch
- PoE OFF/ON Switch
- PoE Output
- Ground screw – ensure grounding resistance is lower than 0.5
E59-602:
- PoE Input connects to PoE Switch
- PoE On/Off Switch
- Port 1: 56VDC PoE Output, Port 2: 24VDC or 56VDC PoE Output
E69-101 / E69-201:
- PoE Input connects to PoE Switch
- PoE OFF/ON Switch
- Ground screw – ensure grounding resistance is lower than 0.5
LED Definitions:
Refer to the user manual for LED definitions for different models.
PoE DIP Switch Definitions:
Refer to the user manual for PoE DIP switch setup for different models.
Frequently Asked Questions (FAQ):
Q: Can I use CAT.5 cables instead of CAT.5e or CAT.6?
A: It is recommended to use CAT.5e or CAT.6 cables to prevent cabling
distance limitations.
Q: What should I do if the ventilation openings are blocked?
A: Ensure the ventilation openings are not blocked to prevent overheating
of the device.
Q: How do I know if the combined bandwidth consumption exceeds the uplink
bandwidth?
A: Check the specifications of your PoE switch and ensure the total
bandwidth consumption does not surpass its capabilities.
Description
| Model | Description |
|---|---|
| E59-101 | Indoor 1 PoE IN to 1 PoE OUT |
| E59-102 | Indoor 1 PoE IN to 2 PoE OUT |
| E59-602 | Indoor Voltage Booster 1 PoE IN to 2 PoE OUT |
| E69-101 | Outdoor 1 PoE IN to 1 PoE OUT |
| --- | --- |
| E69-102 | Outdoor 1 PoE IN to 2 PoE OUT |
| E69-201 | Outdoor 1 PoE IN to 1 PoE OUT |
| E69-202 | Outdoor 1 PoE IN to 2 PoE OUT |
| E69-602 | Outdoor Voltage Booster 1 PoE IN to 2 PoE OUT |
PACKAGE CONTENTS
- 1x PoE Extender
- 1x Quick Installation Guide
IMPORTANT:
- Install the device in a ventilated and dry place, that is free of electromagnetic source, vibration, moisture, and dust.
- Make sure the ventilation openings on the extender are not blocked.
- Use CAT.5e or 6 UTP/STP cables. Avoid using low-quality cables, which will seriously limit the cabling distance.
CONNECTION
Following are the conditions for making the cabling:
- Use 18~19Ω, 24AWG CAT.5e cables.
- Typical cameras stream size feature = 1080p@30fps – 6Mbps; 720p@30fps – 3Mbps.
Make sure the combined bandwidth consumption does not exceed the uplink bandwidth from the PoE switch.
NOTE: There are power losses due to cable resistance.
INSTALLATION
LED DEFINITIONS
| PWR | Green ON | PoE IN port is connected to PSE. |
|---|---|---|
| OFF | No PoE IN connection. | |
| PoE | Green or Amber ON | Power over ethernet cable status |
| OFF | Ethernet cable no Power | |
| LAN | Green ON | Data link is detected. |
| Green Flashing | Data is being transmitted or received. | |
| OFF | Link is not detected. |
PoE DIP SWITCH DEFINITIONS
E59-101 / E59-102 / E69-101 / E69-102
| Pin 1 | ON | Port 1 Turn on PoE output |
|---|---|---|
| OFF | Port 1 Turn off PoE output |
Pin 2
(E59-102 / E69-102 only)
| ON| Port 2 Turn on PoE output
OFF| Port 2 Turn off PoE output
E59-602 / E69-602
| Pin 1 | ON | Port 1 Turn on PoE output |
|---|---|---|
| OFF | Port 1 Turn off PoE output | |
| Pin 2 | ON | Port 2 Turn on PoE output |
| OFF | Port 2 Turn off PoE output | |
| Pin 3 | ON | Port 2 56VDC PoE output |
| OFF | Port 2 24VDC PoE output |
E59/E69-602 Dip Switch Setup
If the device that is going to be connected to this extender is not PoE PD,
please turn off the PoE output function.
(E59-101,E59-102,E69-101.E69-102,E59-602,E69-602)
E69-101 / E69-102 / E69-201 / E69-202 / E69-602
IMPORTANT:
NOTE:
The Outdoor PoE Extender must be grounded using a ground wire between the
ground screw and earth ground.
PoE Output Port
To disconnect a LAN cable, loosen the cable gland and pull the cable
against the socket wall towards the side of the locking tab.
PoE Input Port Connector Assembly
IMPORTANT please follow the procedures below carefully to ensure the best seal:
- Fit a RJ45 plug to the Cat5e/6 cable
- Thread the Cat5e/6 cable through the cap(A) & grip(B)
- Split rubber(C), rubber have two sizes for meet 4.5~6.5mm Cat5e/6 cable.
- Fit the split rubber(C) over the Cat5e/6 cable
- Thread the Cat5e/6 cable through the body(D)
- Fit the washer(E) to the Outdoor PoE Extender connector
- Plug the RJ45 connector on the Cat5e/6 cable into the Outdoor PoE Extender
- Hold Outdoor PoE Extender and then screw the body(D) onto the Outdoor PoE Extender connector tighten firmly
- Push rubber(C) in the grip(B) and screw the cap tighten firmly. The Cat5e/6 cable is sealed when the rubber(C) & grip(B) bulges to the edge of the cap(A).
Application
AETEK INC.
6F, No.192-1, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
T: +886-2-82452822
W: www.aetektec.com
E: sales@aetektec.com
All specifications are subject to change without noice.
Copyright © 2022 AETEK INC. All rights reserved.