NINJA DZ400 Series Foodi XL 2 Basket Air Fryer User Guide
- June 8, 2024
- Ninja
Table of Contents
NINJA DZ400 Series Foodi XL 2 Basket Air Fryer User Guide
WARNINGS
- This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Keep the appliance and its cord out of reach of children. DO NOT allow the appliance to be used by children. Close supervision is necessary when used near children
- Children should not play with the appliance.
- NEVER use electrical socket below counter.
- NEVER connect this appliance to an external timer switch or separate remote-control system.
- When using this appliance, provide at least 6 inches (15.25 cm) of space above and on all sides for air circulation.
- To protect against electrical shock DO NOT immerse cord, plugs, or main unit housing in water or other liquid. Cook only in the basket provided .
- Regularly inspect the appliance and power cord. DO NOT use the appliance if there is damage to the power cord or plug. If the appliance malfunctions or has been damaged in any way, immediately stop use and call Customer Service.
- DO NOT use an extension cord. A short power-supply cord is used to reduce the risk of children grabbing the cord or becoming entangled and to reduce the risk of people tripping over a longer cord.
- ALWAYS ensure the appliance is properly assembled before use.
- DO NOT cover the air intake vent or air outlet while unit is operating. Doing so will prevent even cooking and may damage the unit or cause it to overheat.
- Before placing removable basket into the main unit, ensure basket and unit are clean and dry by wiping with a soft cloth.
- This appliance is for household use only. DO NOT use this appliance for anything other than its intended use. DO NOT use in moving vehicles or boats. DO NOT use outdoors. Misuse may cause injury.
- Intended for worktop use only. Ensure the surface is level, clean and dry. DO NOT move the appliance when in use.
- DO NOT place the appliance near the edge of a worktop during operation.
- DO NOT use accessory attachments not recommended or sold by SharkNinja. Do not place accessories in a microwave, toaster oven, convection oven, or conventional oven or on a ceramic cooktop, electric coil, gas burner range or outdoor grill. The use of accessory attachments not recommended by SharkNinja may cause fire, electric shock or injuries.
- ALWAYS ensure basket is properly closed before operating.
- DO NOT use the appliance without the removable basket installed.
- DO NOT use this appliance for deep-frying.
- DO NOT place appliance on hot surfaces or near a hot gas or electric burner or in a heated oven.
- Prevent food contact with heating elements. DO NOT overfill when cooking. Overfilling may cause personal injury or property damage or affect the safe use of the appliance.
- DO NOT place items on top of unit at any time.
- Socket voltages can vary, affecting the performance of your product. To prevent possible illness, use a thermometer to check that your food is cooked to the temperatures recommended.
- Should the unit emit black smoke, unplug immediately. Wait for smoking to stop before removing any cooking accessories.
- DO NOT touch hot surfaces. Appliance surfaces are hot during and after operation. To prevent burns or personal injury, ALWAYS use protective hot pads or insulated oven mitts and use available handles.
- Extreme caution must be used when the appliance contains hot food. Improper use may result in personal injury.
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to modify the plug in any way
- Spilled food can cause serious burns. Keep appliance and cord away from children. DO NOT let cord hang over edges of tables or counters or touch hot surfaces.
- The basket and crisper plate become extremely hot during the cooking process. Avoid physical contact while removing the basket or plate from the appliance. ALWAYS place basket or plate on a heat-resistant surface after removing. DO NOT touch accessories during or immediately after cooking.
- Cleaning and user maintenance should not be carried out by children.
- To disconnect, press the power button to turn off the unit, then unplug from socket when not in use and before cleaning. Allow to cool before cleaning, disassembly, putting in or taking off parts and storage.
- DO NOT clean with metal scouring pads. Pieces can break off the pad and touch electrical parts, creating the risk of electric shock.
- Please refer to the Cleaning & Maintenance section for regular maintenance of the appliance.
PARTS
FUNCTIONS
AIR FRY: Use this function to give your food crispiness and crunch with
little to no oil.
BAKE: Create decadent baked treats and desserts.
ROAST: Roast meats to tenderize and more.
AIR BROIL: Add the crispy finishing touch to meals, or melt toppings to
create the perfect finish.
REHEAT: Warm your leftovers, with a crispy result.
DEHYDRATE: Dehydrate meats, fruits, and vegetables for healthy snacks.
OPERATING BUTTONS
- Controls the output for the basket on the left.
- Controls the output for the basket on the right.
TEMP arrows: Use the up and down arrows to adjust the cook temperature before or during cooking.
TIME arrows: Use the up and down arrows to adjust the cook time in any function before or during the cook cycle.
SMART FINISH button: Automatically syncs the cook times to ensure both
zones finish at the same time, even if there are different cook times.
MATCH COOK button: Automatically matches Zone 2 settings to those of Zone
1 to cook a larger amount of the same food, or cook different foods using the
same function, temperature, and time.
DIAL: Turn the dial from side to side to select desired cook function.
Press center of dial to start or pause cooking.
POWER BUTTON: The button turns the unit on and off and stops all cooking
functions.
Standby Mode: After 10 minutes of no interaction with the control panel,
the unit will enter standby mode. The Power button will be dimly lit.
Hold Mode: Hold will appear on the unit while in SMART FINISH mode. One
zone will be cooking, while the other zone will be holding until the times
sync together.
BEFORE FIRST USE
- Remove and discard any packaging material, promotional labels, and tape from the unit.
- Remove all accessories from the package and read this manual carefully. Please pay particular attention to operational instructions, warnings, and important safeguards to avoid any injury or property damage.
- Wash the baskets and crisper plates in hot, soapy water, then rinse and dry thoroughly. The crisper plates and baskets are the ONLY dishwasher-safe parts. NEVER clean the main unit in the dishwasher.
COOKING IN YOUR 2-BASKET AIR FRYER
COOKING IN YOUR 2-BASKET AIR FRYER
COOKING WITH DUALZONETM TECHNOLOGY
DualZone Technology utilizes two cooking zones to increase versatility. The
Smart Finish feature ensures that, regardless of different cook settings, both
zones will finish ready to serve at the same time. For detailed instructions
on using each function, see
SMART FINISH
To finish cooking at the same time when foods have different cook times,
temps, or even functions:
-
Place ingredients in the baskets, then insert baskets in unit.
-
Zone 1 will remain illuminated. Use the dial to select the desired cook function. Use the TEMP arrows to set the temperature, and use the TIME arrows to set the time.
-
Select Zone 2, then use the dial to select the desired cook function (Air Broil can be used in only one zone when using Smart Finish). Use the TEMP arrows to set the temperature, and use the TIME arrows to set the time.
-
Press SMART FINISH, then press center of dial to begin cooking in the zone with the longest time. The other zonewill display Hold. The unit will beep and activate the second zone when both zones have the same time remaining.
-
When cooking is complete, the unit will beep and “End” will appear on the display
-
Remove ingredients by dumping them out or using silicone-tipped tongs/utensils. DO NOT place drawer on top of unit.
NOTE: If you decide the food in one of the zones is done cooking before the cook time is up, you can STOP A ZONE. Select that zone, then press center of dial to pause the zone or set the time to zero. See page 11 for further instructions
MATCH COOK
To cook a larger amount of the same food, or cook different foods using the
same function, temperature, and time:
-
Place ingredients in the baskets, then insert baskets in unit.
-
Zone 1 will remain illuminated. Use the dial to select the desired cook function (Air Broil is not available for use in either zone when using Match Cook). Use the TEMP arrows to set the temperature, and use the TIME arrows to set the time.
-
Press the MATCH COOK button to copy the Zone 1 settings to Zone . Then press center of dial to begin cooking in both zones.
NOTE: It is recommended to shake your food during cooking. To keep the time at a synchronized finish, press center of dial to pause both zones. To pause a single zone during dual zone cooking, refer to page 8
COOKING WITH TWO ZONES
When Smart Finish or Match Cook are not selected, technology is integrated
into the design to automatically optimize the distribution of power when using
two zones with different cook times. This means the food in the zone with the
longer cook time may finish cooking before the set time ends. Check food
frequently to avoid overcooking.
-
Select Zone 1, then use the dial to select the desired cook function. Use the TEMP arrows to set the temperature.
-
Use the TIME arrows to set the time.
-
Repeat steps 2 and 3 for Zone 2.
-
Press center of dial to begin cooking in both zones.
-
When cooking is complete in the zone with the shorter cook time, the power will then shift to help optimize cook time in the remaining zone.
-
Continue to monitor food, as it may finish cooking before the set cook time ends.
-
Remove ingredients by dumping them out or using silicone-tipped tongs/untensils
COOKING IN A SINGLE ZONE
For instructions on using both zones at the same time, To turn on the unit,
plug the power cord into a wall outlet, then press the power button.
Air Fry
-
Install crisper plate in the basket, then place ingredients in the basket, and insert basket in unit.
-
The unit will default to Zone 1 (to use Zone 2 instead, select Zone 2). Select AIR FRY.
-
Use the TEMP arrows to set the desired temperature.
Bake
-
Install crisper plate in the basket (optional), then place ingredients in the basket, and insert basket in unit.
-
The unit will default to Zone 1 (to use Zone 2 instead, select Zone 2). Use the dial to select BAKE.
-
Use the TEMP arrows to set the desired temperature.
-
Use the TIME arrows to set the time in 1-minute increments up to 1 hour and in
-
minute increments from 1 to 4 hours. Press center of dial to begin cooking.
-
When cooking is complete, the unit will beep and “End” will appear on the display.
-
Remove ingredients by dumping them out or using silicone-tipped tongs/utensils.
Roast
-
Install crisper plate in the basket (optional), then place ingredients in the basket, and insert basket in unit.
-
The unit will default to Zone 1 (to use Zone 2 instead, select Zone 2). Use the dial to select ROAST.
-
Use the TEMP arrows to set the desired temperature.
-
Use the TIME arrows to set the time in 1-minute increments up to 1 hour and in 5-minute increments from 1 to 4 hours. Press center of dial to begin cooking.
-
When cooking is complete, the unit will beep and “End” will appear on the display.
-
Remove ingredients by dumping them out or using silicone-tipped tongs/utensils.
Air Broil (Not available on all models.)
-
Install crisper plate in the basket, then place ingredients in the basket, and insert basket in unit.
-
The unit will default to Zone 1 (to use Zone 2 instead, select Zone 2). Select AIR BROIL.
-
Use the TEMP arrows to set the desired temperature.
Reheat
-
Install crisper plate in the basket (optional), then place ingredients in the basket, and insert basket in unit.
-
The unit will default to Zone 1 (to use Zone 2 instead, select Zone 2). Use the dial to select REHEAT.
-
Use the TEMP arrows to set the desired temperature.
-
Use the TIME arrows to set the time in 1-minute increments up to 1 hour. Press center of dial to begin reheating.
-
When reheating is complete, the unit will beep and “End” will appear on the display.
-
Remove ingredients by dumping them out or using silicone-tipped tongs/utensils.
PAUSING BOTH ZONES AT THE SAME TIME
-
To pause time in the SMART FINISH mode, or to pause both zones in dual zone cooking, press center of dial.
-
To resume cooking, press center of dial again.
PAUSING A SINGLE ZONE DURING DUAL ZONE COOKING
-
To pause time in a single zone while both zones are running, select the zone you want to pause, then press center of dial.
-
To resume cooking, press center of dial again.
ENDING THE COOK TIME IN ONE ZONE (WHILE USING BOTH ZONES)
-
Select the zone you would like to stop.
-
Then press the down TIME arrow to set the time to zero.
-
Once you have set the time to zero, press the START/PAUSE button.
-
The time in that zone is then canceled, and “End” will appear on the display. Cooking will continue in the other zone.
HELPFUL TIPS
- For consistent browning, make sure ingredients are arranged in an even layer on the bottom of the basket with no overlapping. If ingredients are overlapping, make sure to shake them halfway through cooking.
- Cook temperature and time can be adjusted at any time during cooking. Simply select the zone you want to adjust, then press the TEMP arrows to adjust the temperature or the TIME arrows to adjust the time.
- To convert recipes from a traditional oven, reduce the temperature by 25°F. Check food frequently to avoid overcooking.
- Occasionally, the fan from the air fryer will blow lightweight foods around. To alleviate this, secure foods (like the top slice of bread on a sandwich) with wooden toothpicks.
- The crisper plates elevate ingredients in the baskets so air can circulate under and around ingredients for even, crisp results.
- After selecting a cooking function, you can press center of dial to begin cooking immediately. The unit will run at the default temperature and time.
- For best results with fresh vegetables and potatoes, use at least 1 tablespoon of oil. Add more oil as desired to achieve the preferred level of crispiness.
- For best results, check progress throughout cooking and remove food when desired level of brownness has been achieved. We recommend using an instant-read thermometer to monitor the internal temperature of proteins.
- For best results, remove food directly after the cook time ends to avoid overcooking.
REPLACEMENT PARTS
To order additional parts and accessories, visit ninjaaccessories.com or
contact
Customer Service at
1-877-646-5288.
TROUBLESHOOTING GUIDE
-
How do I adjust the temperature or time while using a single zone?
When a single zone is running the time or temperature can be adjusted at any time by pressing the up/down arrows. -
How do I adjust the temperature or time while using both zones? Select the desired zone, then use the TEMP arrows to adjust the temperature or the TIME arrows to adjust the time.
-
Can I cook different foods in each zone and not worry about cross contamination?
Yes, both zones are self-contained with separate heating elements and fans. -
How do I pause or stop one zone when using both zones?
Select the zone you want to pause or stop, then press center of dial. -
Are the baskets safe to put on my countertop?
The baskets will heat up during cooking. Use caution when handling,and place them on heat-safe surfaces only. DO NOT place the baskets on the top of the unit. -
When should I use the crisper plate?
Use the crisper plate when you want food to come out crispy. The plate elevates the food in the basket so that air can flow under and around it to cook ingredients evenly. -
Why didn’t my food cook fully?
Make sure the basket is fully inserted during cooking. For consistent browning, make sure ingredients are arranged in an even layer on the bottom of the basket with no overlapping. Shake basket to toss ingredients for even crispiness. Cook temperature and time can be adjusted at any time during cooking. Simply use the TEMP arrows to adjust the temperature or the TIME arrows to adjust the time. -
Why is my food burned?
For best results, check progress throughout cooking and remove food when desired level of brownness has been achieved. Remove food immediately after the cook time ends to avoid overcooking. -
Why do some ingredients blow around when air frying?
Occasionally, the fan from the air fryer will blow lightweight foods around. Use wooden toothpicks to secure loose lightweight food, like the top slice of bread on a sandwich. -
Can I air fry wet, battered ingredients?
Yes, but use the proper breading technique. It is important to coat foods first with flour, then with egg, and then with bread crumbs. Press breading firmly onto the battered ingredients, so crumbs won’t be blown off by the fan. -
Why did the display screen go black?
The unit is in standby mode. Press the power button to turn it back on. -
Why is the unit beeping?
Either the food is done cooking, or the other zone has started cooking. -
Why is there an “E” message on the display screen?
The unit is not functioning properly. Please contact Customer Service at 1-877-646-5288. -
Why did a circuit breaker trip while using the unit?
The unit uses 1690 watts of power, so it must be plugged into an outlet on a 15-amp circuit breaker. Using an outlet on a 10-amp breaker will cause the breaker to trip. It is also important that the unit be the only appliance plugged into an outlet when in use. To avoid tripping a breaker, make sure the unit is the only appliance plugged into an outlet on a 15-amp breaker
ONE (1) YEAR LIMITED WARRANTY
The One (1) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable. SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period of one (1) year from the date of purchase when it is used under normal household conditions and maintained according to the requirements outlined in the Owner’s Guide, subject to the following conditions and exclusions:
What is covered by this warranty?
- The original unit and/or non-wearable parts deemed defective, in SharkNinja’s sole discretion, will be repaired or replaced up to one (1) year from the original purchase date.
- In the event a replacement unit is issued, the warranty coverage ends six (6) months following the receipt date of the replacement unit or the remainder of the existing warranty, whichever is later. SharkNinja reserves the right to replace the unit with one of equal or greater value.
What is not covered by this warranty?
- Normal wear and tear of wearable parts (such as blending vessels, lids, cups, blades, blender bases, removable pots, racks, pans, etc.), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty. Replacement parts are available for purchase at ninjaaccessories.com.
- Any unit that has been tampered with or used for commercial purposes.
- Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., failure to keep the well of the motor base clear of food spills and other debris), or damage due to mishandling in transit.
- Consequential and incidental damages.
- Defects caused by repair persons not authorized by SharkNinja. These defects include damages caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its parts) when the repair is performed by a repair person not authorized by SharkNinja.
- Products purchased, used, or operated outside North America.
How to get service
If your appliance fails to operate properly while in use under normal
household conditions within the warranty period, visit
ninjakitchen.com/support for product care and maintenance self-help. Our
Customer Service Specialists are also available at
1-877-646-5288 to assist with product
support and warranty service options, including the possibility of upgrading
to our VIP warranty service options for select product categories. So we may
better assist you, please register your product online at
registeryourninja.com and have the product on hand when you call. SharkNinja
will cover the cost for the customer to send in the unit to us for repair or
replacement. A fee of $19.95 (subject to change) will be charged when
SharkNinja ships the repaired or replacement unit.
How to initiate a warranty claim
You must call 1-877-646-5288 to
initiate a warranty claim. You will need the receipt as proof of purchase. We
also ask that you register your product online at registeryourninja.com and
have the product on hand when you call, so we may better assist you. A
Customer Service Specialist will provide you with return and packing
instruction information.
How state law applies
This warranty gives you specific legal rights, and you also may have other
rights that vary from state to state. Some states do not permit the exclusion
or limitation of incidental or consequential damages, so the above may not
apply to you.