HUPPE Alpha 2 Framed Sliding Door Corner Entry 2 Part Acrylic Glass Pacific S Clear Instruction Manual
- May 14, 2024
- HUPPE
Table of Contents
HUPPE Alpha 2 Framed Sliding Door Corner Entry 2 Part Acrylic Glass
Pacific S Clear
Product Specifications:
- Model: X1 TR
- Dimensions: 1200 x 1200 mm
- Material: Glass
- Includes: Mounting hardware, clear instructions
Product Usage Instructions
Pre-Installation Check:
Before installation, carefully inspect the shower enclosure for any
transport damage and ensure all components are complete. Refer to the
cardboard box to verify if the size is labeled as WEM or M.
Installation Process:
- Begin by unpacking all components and organizing them for easy access.
- Follow the step-by-step instructions provided in the manual for installing the shower enclosure.
- Use the provided mounting hardware to secure the glass panels in place.
- Double-check all connections and fittings to ensure a secure installation.
Post-Installation:
After completing the installation, inspect the shower enclosure for any
issues or defects. Any complaints or claims should be raised immediately.
FAQ (Frequently Asked Questions):
-
Q: What should I do if I notice transport damage after unpacking?
A: If you identify any transport damage upon unpacking, please contact customer support for assistance. Do not proceed with installation. -
Q: Can I install the shower enclosure by myself?
A: While self-installation is possible for experienced individuals, it is recommended to seek professional installation services to ensure proper setup and safety.
Installation instructions
Important information:
Please check the shower enclosure for transport damage and completeness before
installation. Complaints made following installation cannot be accepted.
Please check the information on the cardboard box whether the dimensions are
WEM or M.
Assembly
| WEM| M| ST| PT| SFT| GT| SW
---|---|---|---|---|---|---|---
| Outer tray dimension| Installation dimensions to centre of glass| Swing
door| Two-way door| Folding swing door| Sliding door| Side panel
Installation
Note:
This installation situation only applies if the dimensions “M” are specified
on the box – made-to-measure design acc. to glass centre. 
