PUREMATE PM160 CozyMate Heated Throw Luxurious Electric Blanket Instruction Manual
- June 2, 2024
- PureMate
Table of Contents
- PUREMATE PM160 CozyMate Heated Throw Luxurious Electric Blanket
- Specifications
- IMPORTANT SAFETY INSTRUCTIONS
- SYMBOL EXPLANATION
- OPERATING INSTRUCTIONS
- USING THE ELECTRIC BLANKET
- FOR CONTROLLER
- CLEANING & MAINTAINANCE
- TROUBLESHOOTING
- SPECIFICATION
- FAQ
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PUREMATE PM160 CozyMate Heated Throw Luxurious Electric Blanket
Specifications
- Product: Luxury Heated Throw
- Model No: PM160
Thank you for purchasing the innovative PureMate heated throw We wish you many years of healthy indoor air with this efficient and effective product.
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of personal injury or damage to property, basic important
safety instructions must be observed including the following:
Read the instruction manual thoroughly and retain it for future reference.
Ensure before use you know how the electric blanket works 5. how to operate
it.
-
Always turn the power off at the power outlet before you insert or remove a plug remove by grasping the plug – do not pull on the cord.
-
Turn the power off and remove the plug when the electric blanket is not in use or before cleaning.
-
Always use the electric blanket from a power outlet of the voltage (A.C. Only) marked on the rating label.
-
Use only the type of controller marked on the rating label.
-
Use only for the intended purpose.
-
Do not use it if it is damp.
-
This blanket is not intended for medical use in hospitals.
-
Do not use it together with another heating appliance.
-
When in use ensure the blanket&. mains leads do not get trapped.
-
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance Cleaning and user maintenance shall not be made by; children without supervision.
-
Children should be supervised to ensure that they do not play with the appliance
-
Examine the blanket frequently to check that there are no signs of wear or damage if any damage/wear is spotted, do not use a blanket and please contact PureMate customer service.
-
If the supply cord of this appliance is damaged, it must only be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
Please contact PureMate Customer Service. -
This appliance must not be used by persons insensitive to heat and other very vulnerable persons who are unable to react to overheating.
-
Children under the age of three are not to use this appliance due to their inability to react to overheating.
-
This appliance is not to be used by young children over 3 years of age unless the controls have been pre-set by a parent or guardian, or unless the child has been adequately instructed on how to operate the controls safely.
SYMBOL EXPLANATION
OPERATING INSTRUCTIONS
- This electric blanket is intended to be used as an over blanket, it is to be on top of the individual and not under them, or it should be placed above a top sheet on top of the person and not under them on a mattress.
- Do not tuck it in around or under the person. It should remain loose so as not to prohibit the user’s movement.
USING THE ELECTRIC BLANKET
Connect the controller to the blanket, simply hold the socket with one hand, and push the controller plug until the locking tab is located over the plug on top of the controller plug.
- Ensure there is a mains supply nearby and that when in use, the mains lead will not be in a position that could cause a tripping hazard.
- Ensure there is a mains supply nearby and that when in use, the mains lead will not be in a position that could cause a tripping hazard.
- When plugged into the mains supply, the controller must be within easy reach of the user.
- Do not cover the controller and do not exert pressure on the controller.
FOR CONTROLLER
- Please set at “H” high temperature to preheat for 30-60 minutes before using.
- Select the desired temperature position.
If using it during sleep or for long periods, please set it at “L” low- temperature position or “1” temperature position, to avoid overheating which may cause discomfort. The starting-up state is the standby state. The digital display of temperature position is “0” and the digital display of timing position is “0”
- a. Press the “Temp” button, the digital display of temperature position is “7” and the digital display of timing position is “9”.
- b. Press the “Temp” button, and the digital display of temperature position circulates from “L.1.2.3.4.5.6.7”.L being low, and 7 being high.
- c. Press the “Time” button, and the digital display of the timing position circulates from “1.2.3.4.5.6.7.8.9”. 1 is for 1 hour, 9 is for 9 hours.
- d. Press the “High” button, the high-temperature position is preheating, which is displayed as “H”. The high-temperature position will automatically change to “L” low-temperature position after 1 hour.
CONNECTING ANO REMOVING THE CONTROLLER
WARNING: DO NOT leave the remote control underneath the blanket, wrapped
in the blanket, or on the blanket while it is turned on.
- Your electric blanket is fitted with overheating protection. If your controller gets too hot, the electric blanket will turn off and the remote will display ‘C’. Turn the remote control off. Place the remote so that no part of it touches the blanket and wait for it to cool down. When the blanket and remote control have cooled down you can turn the product back on again.
- If you leave your blanket at any point while it is turned on, please leave it completely open on a flat surface.
CAUTION: Do not leave your blanket folded or crumpled, whilst it is turned on.
To remove the controller, lift the locking tab up with your finger and pull the plug directly out. Do not pull the controller cable and do not try to pull the controller plug out without lifting the locking tab as you will damage the socket. To connect the controller lift the locking tab up with your finger and pull the plug directly in.
AFTER USE
When the blanket is not in use, please switch the controller to the off
position; and remove the plug from the power socket. If the blanket is not to
be used for a long period, store the blanket in a cool and dry place.
CLEANING & MAINTAINANCE
When not in use and before cleaning the blanket, disconnect it from the mains.
Disconnect the controller from the blanket.
-
Do not immerse the controller/s in water or get them wet.
-
Clean the surface of the cord with neutral detergent if the cord is dirty and wipe it dry with soft cloth.
-
Do not dry clean this blanket as it could damage the heating elements.
-
Do not use industrial solvents such as benzene, kerosene or similar solvents to clean it.
-
To clean the blanket, hand wipe it down with a soft damp cloth with very mild detergent, mildly process at a maximum washing temperature of 30°C. Allow it to dry thoroughly before using or storing it. When washed, drape it over a clothesline to dry. Do not use clothes pegs to secure it.
-
Machine washing of the blanket is possible; however, hand wiping it down will prolong the life of the blanket. To machine wash, remove the controller/s place the blanket in a net bag, and seal it. Use a small amount of detergent and set the washing machine to a “Delicate Wash” with a maximum temperature of 30°C. When washed, remove the blanket from the net bag and drape it over clothes line to dry. Do not use; clothes
pegs to secure it. -
Do not wring out the blanket.
-
Do not dry dry using a tumble dryer.
-
Do not iron the blanket.
-
Do not dry the blanket in the sun
-
Do not connect it to the mains supply to dry it.
-
Do not use an appliance such as a hair dryer to dry it.
-
Allow the blanket to dry naturally.
-
Do not use the blanket if it is damp.
-
Do not try to repair the blanket if faulty- have it looked at by a qualified person.
-
Examine the blanket frequently to check that there are no signs of wear or damage. If any damage/wear is spotted, do not use the blanket and seek specialist advice.
-
if the mains lead or controller is damaged, do not open or attempt to repair them as they must be serviced by a qualified, do not open or attempt to repair them as they must be serviced by a qualified person.
STORAGE
- When not in use, allow it to cool down before folding, disconnect the controller is from the blanket, then gently, fold the blanket and place it back into the pocking bog it arrived in.
- Make sure the blanket is dry before folding and pocking it away. The blanket should be hung in a ventilated location to dry naturally.
- Do not use mothproofing agents on the blanket.
- Insulation of the blanket will be damaged if the blanket is dried under the sun, ironed, or when moth-proofing agents are used. Damage to the insulation material will cause safety problems.
- Do not crease the appliance by placing items on top of it during storage.
- The blanked should be stored in a cool dry place.
TROUBLESHOOTING
SPECIFICATION
DISPOSAL OF THIS DEVICE
At the end of the product life cycle, you should not throw this machine into the normal household garbage but bring the product to a collection point for the recycling of electrical and electronic equipment.
FAQ
- Q: Can children use this electric blanket?
- A: This appliance can be used by children aged 8 years and above with supervision or instruction concerning safe use. Children under the age of three are not recommended to use this appliance due to their inability to react to overheating.
- Q: What should I do if I spot any signs of wear or damage on the blanket?
- A: If any damage or wear is spotted, do not use the blanket and please contact PureMate customer service for assistance.
LUXURY HEATED THROW I
MODEL NO: PM 160
- Super Tech Health Limited
- 129 Shady Lane
- Great Barr
- Birmingham
- West Midlands
- B44 9ER
- United Kingdom
WWW.PUREMATE.CO.UK
© Copyright 2021