Huizhou YKY-B01 Wireless Couples Earphone User Manual
- June 2, 2024
- Huizhou
Table of Contents
Huizhou YKY-B01 Wireless Couples Earphone
Product Information
Specifications
- Model: XYZ-1000
- Dimensions: 10 x 5 x 3 inches
- Weight: 2 lbs
- Power Input: 120V AC
- Frequency: 50-60Hz
- Warranty: 1 year limited warranty
Product Usage Instructions
Getting Started
- Unbox the product and remove all packaging materials.
- Connect the power cord to a suitable power outlet.
- Press the power button to turn on the device.
Setting up the Device
Follow these steps to set up the device:
- Adjust the settings using the control panel.
- Refer to the user manual for detailed instructions on configuring the device.
- Ensure proper ventilation around the device for optimal performance.
Maintenance and Care
To ensure longevity and performance, follow these maintenance tips:
- Clean the device regularly with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures or humidity.
- Keep the device away from water or liquids.
FAQ
Q: How do I troubleshoot common issues with the device?
A: Refer to the troubleshooting section in the user manual for step-by-
step solutions to common problems.
Q: Can I use this product internationally?
A: This product is designed for use with a 120V AC power input and may
not be suitable for international use without a voltage converter.
Read these safety instructions before using the device and store them for
future reference.
YKY-01 is a wireless couples earphone that including two pairs of YKY-J02
earclip(OWS) and YKY-B01 earbuds.
After connecting the earphones to the device, you canstill listen to music and
answer calls even when you are doing other activities (such as fitness).
Beforeusing their mobile devices,make sure they are compatible with this
device.
Be careful not to wet the equipment when using it. If the equipment is damaged
by water, it may malfunction.
Avoid storing or using the device at temperatures lower than -15°C or higher
than 55°C, which could shorten the headset or battery life.
Specifications
- Modelo: YKY-01
- Bluetooth Version: V 5.3
- Bluetooth Range: 10meters
- Playback time: 4-5 hours
- Charging time: 1-1.5 hour
- Standby time: 100 hours
Accessories:
- 1 *user manual
- 1*type-c charging cable
Key function diagram
Use headphones
- Insert the headset into the acupoint of the headset charging box correctly. If the indicator light does not blink, connect the charging box to the charger and charge it for more than 10 minutes.
- Close the charging box.
- Open the charging box and take out the headset, the headset will automatically enter the pairing mode
- On the mobile device, enable Bluetooth function to search for ” YKY-B01 and YKY-J02″ and connect it to the mobile device
Touch control
| Touch pannel | Left earbuds | Riaht earbuds |
|---|---|---|
| long Touch | P owe ron /o ff | P ower |
on /o ff
Single Touch| Play/ Suspend| Play/ Suspend
Long press(2seconds)| N e x t tr ac k| P
re vi ous tra c k
Ta p twice| Vo l ume +| Vo l u
m e –
Function| Touch pannel
---|---
A n swe r ca ll s| Si n gle T
ouch
R ejec t in co m i n g call| L o
n g press { 2 seconds)
R ed i a l l ast nu m b er| Si
n gle T ouch
Vo i ce Ass i st an t| T hi r d
times T ouch
When the left and right ears cannot pair. Please click four times when not connected to your phone Earphones (both sides need to be pushed). After four clicks take effect, it will automatically shut down. The reset is now complete. Put the earphones into the charging compartment and take them out to pair them again.
Charging
You need to charge your device for 10 minutes before using it for the first
time or after a long period of absence.
When the battery of the earplug is low, it will issue “Please charge”,which
can put the earphone into the charging box. When the earphone is charging, the
red light will be displayed, and the light will be off if the charge is
slow.Please close the charging case when storing or charging the headphones.
The charging case has a built-in battery, please use a type-c cable to charge
itbox, then connect it to a computing or other charger for charging,charging
When charging, the indicator light flashes, and the fully charged indicator
light is always on.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received,including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Cornet the equipment into an oule on a circuit diferent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/I’V technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>