Huizhou Jishunkang Industrial GS-FT02WC Extension Socket User Manual

June 3, 2024
Huizhou Jishunkang Industrial

Huizhou Jishunkang Industrial GS-FT02WC Extension Socket User Manual

Extension Socket (with power adapter) User Manual

Warnings:
Please ensure that the total power rating of the devices you are charging is lower than the power
rating in specifications. Unplug if power cord becomes hot. Avoid touching sockets and plugs withwet hands. Do not disassemble the unit. Keep unit away from children, pets, water, and sources
of heat. Usage Instructions:
Connect the power base to a grounded (three-pronged) power outlet. To charge your devices, you have several options. Connect a USB cable to one of the smart outlets, or connect an AC
Adapter to a protected outlet, or place a QI-certified device on the stand and allow it to touch the”wireless charge” area of the power base. User Advice:
This power base is not a toy. It must be situated on a flat, stable surface. It should also be placedin a location where it cannot be knocked over or present a hazard. This product is for indoor useonly. Tech specifications:

  • Protected outlets:

  • Item number: GS-FT02WC, GS-FT02UW-2, GS-FT02UW-4 2

  • Smart USB outlets: 3

  • USB output for FT02UW-2: Single USB port output: DC5V, 3A Max (when wireless charge non-occupancy); Single USB port output: DC5V, 1A Max (when wireless charge occupancy);

  • USB output for FT02UW-4: Single USB port output: DC5V, 4.8A Max (when wireless charge non-occupancy);Single USB port output: DC5V, 2A Max (when wireless charge occupancy);

  • USB output for FT02WC:

  • Single USB-A1 port output: DC5V, 3A; DC9V, 2A; DC12V, 1.5A, 18W Max Single USB-A2 port output: DC5V, 2.4A
    Single Type C port output: DC5V, 3A; DC9V, 2.2A; DC12V, 1.67A, 20W Max
    Three port simultaneously total output DC5V, 3.4A (when wireless charge non- occupancy)
    Three port simultaneously total output DC5V, 1.5A (when wireless charge occupancy)

  • Wireless Charging: DC 9V, 1.12A / (10W) • Wireless compatible phone models: iPhone 12 / iPhone 12 Pro / iPhone 12 Pro MAX, iPhone 11/ iPhone 11 Pro / iPhone 11 Pro MAX / iPhone SE (2020) / iPhone XS / iPhone XS MAX/ iPhone XR/ iPhone 8 Plus / iPhone X / iPhone 8, Samsung Galaxy Note9 / Galaxy S9 / Galaxy S9+ / Galaxy Note8 / Galaxy S8 / Galaxy S8+ / Galaxy Note7 / Galaxy S7 Edge / Galaxy S7 / Galaxy S6 / Galaxy S6 Edge / Galaxy S6 Edge+ / Galaxy Note5, LG G7 / G6 / G6 plus / G3 / G2 / V30 / V30 plus / Vu 3/
    Vu 2 and other Qi-certified devices.

  • Power rating: 15A 125Vac 1875W 60Hz

  • Power surge protection: 300 Joules

  • Power cord: 5 feet (1.5 meters)

  • LED indicator: “Ground OK”

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could voidthe user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. FCC ID: 2A85S-GS-FT02WC

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals