Huizhou XR-C8-8 Multifunctional Audio Speaker User Guide

Huizhou XR-C8-8 Multifunctional Audio Speaker

Specifications

• Model: XR-C8-8
• Power Input: Type-C DC 5V port, DC 9V port
• Features: AM/FM radio, USB port, EQ function, Bluetooth

Product Overview

The XR-C8-8 system includes various components such as loudspeakers, mode button, preset/play mode button, menu/info button, volume/scan/enter/sleep knob, EQ settings, ON/OFF button, display screen, battery cover screw, USB port, external dry battery power supply box, and FM antenna.

Getting Started

• Press the Mode button to switch between AM and FM modes.
• Extend the FM antenna for optimal signal reception.
• FM mode allows saving up to 30 preset stations for quick access.

Manual Search

1. Long press the Preset/Play Mode button.
2. Use the Volume/Scan/Enter/Snooze knob or buttons to select and save stations.
3. Press the Volume/Scan/Enter/Snooze button to save the station.

Display Information

Press the Menu/Info key to switch between different display messages:

1. Radio Text
2. PTY
3. Name
4. Stereo/Mono
5. Time
6. Date

FM Menu

1. Long press the Menu/Info button to access the menu.
2. Scroll through options using the Volume/Scan/Enter/Snooze knob or buttons.
3. Confirm selections by pressing the Volume/Scan/Enter/Snooze button.

Audio Settings

• Force Mono: Play sound in mono (1 channel).
• Stereo Allowed: Play sound in stereo if supported (2 or more channels).

Bluetooth Instructions

• To utilize Bluetooth functionality, refer to the specific Bluetooth pairing instructions in the user manual.

EQ Function

• The EQ button offers 5 sound modes: Flat, Rock, Pop, Jazz, and Classical. Select the desired mode by pressing the EQ button.

System Settings

1. Access system settings by long-pressing the Menu/Info button.
2. Navigate through options using the Volume/Scan/Enter/Snooze knob or buttons.

Sleep & Alarm:

• Set sleep timer (off, 15, 30, 45, 60, 90 minutes) and configure alarm settings as needed.

Backlight Timeout:

• Adjust backlight timeout settings for display light power saving mode based on user preferences.

On Level & Language:

• Set the display brightness level when powered on and configure language preferences.

Factory Reset & SW Version:

• To perform a factory reset or check the software version, refer to the relevant sections in the user manual.

FAQ:

Q: How do I pair my device via Bluetooth?

• A: To pair your device, turn on Bluetooth on both your device and the XR-C8-8 system. Access Bluetooth settings on your device and search for available devices. Select ‘XR-C8-8’ from the list and follow the on-screen instructions to complete pairing.

Product Overview

system

1. Loudspeaker
2. Mode button
3. Preset / Play mode button
4. Menu / Info button
5. Volume/scan / enter / sleep.
6. Knob
7. Skip / Search / Move Up adjustment button
8. EQ
9. Skip / Search / Down button
10. ON/OFF button
11. display screen
12. Battery cover screw
13. The type-cDC input is a 5V port
14. The DC is input to the 9V port
15. USB port
16. External dry battery power supply box
17. FM antenna

GETTING STARTED

• Plug the power cord into the back of the radio and plug the power adapter into the AC power outlet.
• Expand the antenna for optimal reception.
• Turn on/off the radio power: long press the ON / OFF button to enter the standby state. Then short press the ON /OFF button to enter the boot state.
• Select mode: Press the MODE (Mode) button for the radio. The selected mode will appear on the display screen
• Optional available mode: FM / AM / Bluetooth / USB
• Adjust the volume: Turn the VOLUME (volume) knob on the radio to increase/decrease the volume.

AM/FM MODE

• The Mode button on the radio until the display shows “FM”
• For the optimal FM receiving effect, the antenna is extended to the back side and placed in the optimal signal-receiving position.
• The FM mode includes 30 preset slots where you can save your favorite FM station for quick access. manual search:
• Adjust the FM frequency: press or / button.

Automatic search:

• Automatic search: Long press the VOLUME / SCAN / ENTER / SNOOZE button.
• All the stations will be stored in a preset state.

Play a preset radio station:

1. Short press of the PRESET / PLAY MODE button.
2. Turn the VOLUME / SCAN / ENTER / SNOOZE knob or press/button to select the radio station.
3. Press the VOLUME / SCAN / ENTER / SNOOZE button to play the selected station
4. The selected radio station is now playing.

Manually save the radio station to the preset:

Radio stations can be manually saved to the presets.

1. Long press the PRESET / PLAY MODE button.
2. Turn the VOLUME / SCAN / ENTER / SNOOZE knob or press the / button to select the number you want to save the station.
3. Press the VOLUME / SCAN / ENTER / SNOOZE button to save the radio station.

Display information

• Press the MENU / INFO key to switch between different display messages

You can switch the display information between the following messages:

1. Radio Text
2. PTY
3. Name
4. Stereo/Mono
5. Time
6. Date

FM menu:

1. Long press the MENU / INFO button to enter the menu.
2. Scroll between options using the VOLUME / SCAN / ENTER / SNOOZE knob or press/button.
3. Press the VOLUME / SCAN / ENTER / SNOOZE button to confirm the selected option.

Note: Press the message/menu button again to exit the menu MENU.

Scan settings| All stations| Scan and save all stations to preset when scanning for stations.
---|---|---
Strong stations| Only save stations with strong signals to preset when scanning for stations.
Audio settings| Force mono| Always play sound in mono (1 channel)
Stereo allowed| Allow playing sound in stereo, if supported (2 or more channels)
System| See the System Settings section for more information

Bluetooth instructions

1. Press the mode button of the radio until the display shows “Bluetooth”
2. If the radio is not connected to the Bluetooth device, the display text will show “disconnected not connected” will flash.
3. Turn on Bluetooth on your Bluetooth device.
4. Find the “Bluetooth pairing name” under the available Bluetooth connection on the Bluetooth device and select it.
5. Your Bluetooth connection should now display “Connected” (Connected) on the Bluetooth device, and the display will display the text “Connected (Connected”).
6. The radio will now play a sound from the Bluetooth device.
7. Note: When playing through Bluetooth, remember to turn on the volume of the Bluetooth device.
8. Note: Before connecting a new Bluetooth device to the radio, remember to disable the Bluetooth connection to the currently connected Bluetooth device. The radio can only be connected to one Bluetooth device at a time.

Bluetooth control:

1. Play/pause: press the VOLUME / SCAN / ENTER / SNOOZE button.
2. Last track or next track: Press or button.

EQ function

1. The unit offers 5 different sound modes to enhance your listening experience. You can Select the desired effect by repeatedly pressing the “EQ” button below
2. Order: Flat.Rock.Pop. Jazz.Classical Common-Rock-Jazz-pop-classic

System Settings

The system settings can be entered in any mode

1. Long press the MENU / INFO button to enter the menu.
2. Use the VOLUME / SCAN / ENTER / SNOOZE knob.
3. Note: Press the message/menu button again to exit the menu MENU.

System| Sleep (off, 15, 30, 45, 60, 90 )| The radio is set to enter standby mode after the selected minutes.
---|---|---
Alarm (Alarm 1, Alarm 2)| Set the alert. Refer to the alarm section for setup instructions
Time| Time setting. See the Time section for the setup instructions
Backlight| Timeout (10, 20, 30,  45, 60,    90,    120, 180 or off)| Timer in seconds for when the display light will go into power saving mode after not receiving input from the user. Timer, in seconds, the display light enters the power saving mode after not receiving user input。 Set to ON to turn off power saving mode. Set to off turns off energy

saving mode

On level (High, Medium, or low)| Set display brightness level when powered on.
Dim level| Set background light level when in power saving

mode.

Language| Select language English.Deutsch.Ltaliano.Francais.Norsk, Espanol. Neder lands. Svenska.
Factory reset| Reset the system to default settings
SW version| Display the current software version

Set the alarm clock

1. When setting the alarm clock, change the setting through the VOLUME / SCAN / ENTER / SNOOZE knob on the radio or press/button, and press the VOLUME / SCAN / ENTER / SNOOZE button to confirm the selection.
2. Long press the MENU / INFO button to enter the menu, then select System (System) -> Alarm (Alert), then select Alarm 1 (Alert 1) or Alarm 2 (Alert 2).
3. Set the alarm (on / off). Press the VOLUME / SCAN / ENTER / SNOOZE (select) button to confirm
4. Set the alarm time. Confirm to continue.
5. Set the alarm for several minutes. Confirm to continue
6. Set the alarm duration. Confirm to continue.
7. Set the alarm source mode (buzzer / / FM / AM). Confirm to continue.
8. Set the cycle mode (once / weekend/weekday / every day). Confirm to continue.
9. If you select one in loop mode, you must select the alarm date. Select the desired date, month, and year, and then press the Select button to confirm the selection. If you select a past date, the Invalid Date appears on the screen.
10. Set the alarm volume. Confirm to continue.
11. You need to set the alarm to turn on to activate the alarm. To deactivate the alarm, select Close.

Snooze

• When the alarm starts, press the VOLUME / SCAN / ENTER / SNOOZE knob or mode button to delay the alarm for 9 minutes.
• To cancel the alarm or nap, press the radio ON / OFF power button.

Sleep

• The system can be programmed after 15,30,45,60, and 90 minutes to enter standby mode. Select Hibernate to turn off the hibernation function.

Time

1. Set the radio time and date with Set Time / Date she. Press the VOLUME / SCAN / ENTER / SNOOZE (select) button to confirm.
2. Set 12 / 24 hours set to clock 12 or 24 hours running. Press the VOLUME / SCAN / ENTER / SNOOZE (select) button to confirm.
3. Set date forma Set up the clock display pattern. Press the VOLUME / SCAN / ENTER / SNOOZE (select) button to confirm.

Backlight

1. Use Timeout (temporary break) to change the temporary rest time on the radio, 10.20.30.45.60.90.120.180. seconds selection, to close the selection off.
2. Use the Dim level to change the temporary rest backlight level on the radio. There are three settings (low, medium, and high).
3. Use the on level to change the backlight level on the radio. There are three settings (low, medium, and high).

Timing

1. Use Set On time to set the boot time on the radio. turn off off..
2. Use Set Off time to set the shutdown time on the radio, and turn off off.

hands-free telephone

• If the radio is connected to the Bluetooth mobile phone, when the Bluetooth mobile phone has an external phone, just press the radio VOLUME / SCAN / ENTER / SNOOZE button to confirm, that the radio can connect to the external phone.

Specifications

• MP3 played
• USB charging for playback
• FM radio with 30 preset stations
• AM radio with 30 preset stations
• Bluetooth V5.0
• Speakers output: 1 * 5W
• LCM display screen
• Bar antenna
• Multinational language
• Power by a power outlet
• External # 2 dry battery powered (no battery provided)
• Support the charger for the type-c 5V power supply
• Power supply input : 9V=2A
• Power supply voltage: 100-240V, 50 / 60Hz
• Product size: 27.3x 11.5×19.5 cm

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm between the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>