VEVOR RV-50A Power Outlet Box User Manual

: June 2, 2024
: VEVOR

Table of Contents

RV-50A Power Outlet Box
Installation Instructions
Documents / Resources

RV-50A

RV-50A Power Outlet Box

NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us:
CustomerService@vevor.com
This is the original instruction, please read all manual instructions carefully before operating.
VEVOR reserves clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there is any technology or software updates on our product.

Installation Instructions

Power Outlet Box
Sku#: DGNRV50A1450RJD0NV0
Model: RV-50A
Desc: 50A 125/250V
NEMA: 14-50R
WARNINGI: ELECTRICAL SHOCK AND FIRE HAZARD！
The outlet is not to be connected to power prlor to installation. Fallure to comply with thisinstruction could result in an electrical failure, fire and electrocution.
IMPORTANT: Installation of this power outlet box and related wiring must be done by aqualified electrician in compliance with all applicable electrical codes, When being used ttpower a structure, this outlet must be used in conjunctlon with a transfer switch, Not forindoor use,
When using an engine driven generator, locate away from doors and windows toavoid the build-up of carbon monoxide from the engine exhaust in enclosed areas.
Installing the Power Outlet Box;
Mount the power outlet box on the outside of the building in a convenient location, using thethree holes provided in the back of the cabinet, Using copper wire only and approved wiringmethods, run the wiring through one of the knockouts in the cabinet to a junction boxlocated near the transfer switch, If using conduit, pull at least four colors.
WireGauge: 4AWG~8AWG.Strip the wire insulation 3/5″(15mm,FIG1) (do not tin conductors) and connect the wires inthe power outlet box as follows. Making sure there ls no wire insulatlon in any terminal ancthe outlet terminal screws are tightened to 35 inch-pounds torque using Electric flat Screwdriver.
Cable Color Scheme：
Black/Red=Load (250 Vlot),the terminals marked “Black” and “Red”
White=W-Neutral Conductor connected to “White”marking terminal
Green=Green power inlet wire to green ground screw terminal on inside of cabinet.
If required, green wire to green ground screw terminal on inside of cabinet.(FIG2) VEVOR RV-50A Power Outlet Box - Cable Color
Scheme Enter installation considerations:
Choose one threading hole that suits you the best.
(A,B,C,or D)We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us.
You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.