AJAX LineSupply (45 W) Fibra Module For Additional Power Supply Instructions
- June 2, 2024
- ajax
Table of Contents
AJAX LineSupply (45 W) Fibra Module For Additional Power Supply
Instructions
INSTALLATION INSTRUCTION
This is a wired device of the Fibra product line. Only accredited Ajax Systems partners can sell, install, and administer Fibra products.
LineSupply ( 75 W) Fibra version is also available, featuring greater output power and two output lines instead of one.
Power supply for any devices
- Output power per line-30 W
- Line supply with any configuration of Fibra devices
- Fibra line extension by 2.000 m²
- Backup power supply from the battery in case of main power supply loss
Fibra
communication technology
- Wired connection range between the module and the hub at a distance of up to 2.000 m²
- Encrypted communication
- Regular polling to display current device statuses
Sabotage protection
- Tamper alarm
- Protection against short circuit and overvoltage
- Power supply of Fibra devices independent from the hub
- Module authentication to prevent spoofing
Quick installation and setup
- Pairing with the hub via the line scanning function or QR code
- On-site or remote configuration and testing
- Convenient mounting into Case (sold separately)
- Easy maintenance
Superior, Fibra, and Baseline product lines are mutually compatible. This opens up numerous possibilities for building systems of any configuration.
Compliance with standards
EN 50131 (Grade 3)
PD 6662:2017
Compatibility
Hubs
Hub Hybrid (26)
Hub Hybrid (46)
Communication with control panel
Fibra communication technology
Wired connection range up to 2.000 m
With U/UTP cat 5:4×2×0.51
cable
Recommended cables
U/UTP cat.5, 4x2x0.51 (copper conductor)
signal cable 4x 0.22 (copper conductor)
Power supply for third-party devices
Number of output lines
1
LimeSupply (75 W) Fibra version with 75 W output power has two output lines
Output voltage 24 V-
Max output current
1.25 A (for each output when using LimeSupply Fibra 75W)
Power
Main
100-240 V-
50/60 Hz
0.7 A
Backup
12 V battery with a capacity
af 7-18 Ah
Installation
Operating temperature range
from-10°C to +40°C
Operating humidity
up to 75%
Battery is not mcluded in the complete bet
Enclosure
Color: white, black
Dimensions: 16085×53 mm
Weight; 455 g
Complete set
Line Supply (45 W) Fibra
Power supply cable
Battery connection cable
Two terminal adapters
Quick start guide
Case is not included in the complete set and sold separately from LineSupply (45 W) Fibra
- When using a U/UTP cat 5, 4x2x0.51 cable.
- The module doesn’t have a tamper. To protect LineSupply (45 W) Fibra against sabotage. install it in Case (sold separately). The Case has a tamper that connects to LineSupply