RITS-N MS905 Microwave Motion Sensor User Manual

RITS-N MS905 Microwave Motion Sensor

Product Specifications:

• Model: &&,QIRUPDWLRQ
• Features: SDUWRIWKH)&&5HVXOWV2SHUDWLRQ, LQWHUIDFHDQG, LQFOXGLQJLQWHUIHUHQFHWKDWPDFDXVHXQGHVLUHG RSHUDWLRQ
• Operating Distance: Minimum 20 centimeters from the body
• Compliance: FCC RF radiation exposure limits for an uncontrolled environment

Product Usage Instructions

Installation:
Ensure the product is placed with a minimum distance of 20 centimeters between the radiator and your body.

Operation:
Do not co-locate this transmitter with any other antenna or transmitter. Follow the provided instructions to activate the desired features.

Maintenance:
Keep the product clean and free from dust. Avoid exposure to extreme temperatures or moisture.

FAQs :

1. What is the recommended distance for operating the product?
   The product should be operated with a minimum distance of 20 centimeters between the radiator and the body.

2. Can this product be used in conjunction with other transmitters?
   No, this transmitter must not be co-located or operated with any other antenna or transmitter.

3. How should I clean the product?
   Use a soft, dry cloth to gently wipe the product surface. Avoid using harsh chemicals or abrasive materials.

MS905 is a microwave motion sensor based on 24GHz K-Band. This serves to control similar devices for the opening and closing of automatic doors by detecting the movement of humans or objects. For the safe and accurate use of the product, please read this instruction manual carefully.

Introduction

• A microwave motion sensor based on 24GHz K-Band.
• Uni-directional or Bi-directional to be set by DIP switch.
• NO/NC to be set by DIP switch.
• Detect sensitivity and angle adjustable.
• Operating Temperature: -40°C to 85°C

Technical Specifications

• Power Supply: DC 12-30V, AC 12-24V

• Microwave Module : 24.150 – 24.250GHz

• Contact Hold Time : 1 second

• Detecting Field : 4m(W) x 2m(D)
  (Height: 2.3m, Lowest Angle/Highest Sensitivity)

• Current Consumption : 42mA(DC12V, +25°C)

• Contact Capacity : 1 00mA 400V AC/DC

• Max Installation Height : 3.2m

• Operating Temperature/Humidity : -40°C-85°C R.H.0%-95%

General Information

NOTE Specification is subject to change without prior notice to improve function and quality of product.

Installation Guide

Be aware of electric shock and other wiring on site
After connecting a power cable to connector, fix the lower case to the wall and cable to cable holder.

Do not supply the power during engineering work of installation. Do not disassemble or modify the device. ii may cause fire or electric shock.

Sensitivity Setting

Operation Mode Setting

Detection Area ****

Wiring Diagram

Installation Caution

FCC Information

This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions :

• (1) This Device may not cause harmful interface, and
• (2) This device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receive
• Connect the equipment into an outlet on a circuit different from that to which receiver is connected.
• Consult the dealer or experienced radio/TV technician for help.

WARNING Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
CAUTION : Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit.
IMPORTANT NOTE. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>