RAM MOUNTS RAM-B-186-M6-PD4U Grab Handle Mount For Toyota Tundra Installation Guide
- March 25, 2024
- RAM MOUNTS
Table of Contents
**RAM MOUNTS RAM-B-186-M6-PD4U Grab Handle Mount For Toyota Tundra Installation Guide
**
DIMENSION INSTRUCTION
STOP
Please read through these instructions Carefully prior to installation.
Parts Index
Not to scale
-
A
-
B
-
C
-
D
With a plastic pry tool, carefully pry the grab handle panel open to gain access to the existing grab handle bolt. Remove the existing bolt with a 10mm socket.
With the original grab handle bolt removed, attach the (A) RAM® Ball with (B) Bolt and (C) Lock Washer.
For a cleaner look, drill a hole into the grab handle panel to accommodate the (D) Spacer.
RMR-INS-B-367-M6
Safety Precaution
Do not install this product near or over an airbag deployment area or in a location that obstructs the driver’s vision or interferes with vehicle operation. National Products, Inc does not assume responsibility or liability for any such personal injury, death or property damage.
rammount.com
1.800.497.7479
support@rammount.com
Scan or click to watch the video instructions
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>