RAM MOUNTS RMR-INS-2343 RAM Tough-Tray Spring Loaded Laptop Holder Instruction Manual
- October 30, 2023
- RAM MOUNTS
Table of Contents
RAM MOUNTS RMR-INS-2343 RAM Tough-Tray Spring Loaded Laptop Holder
Product Information
The product is a laptop mount kit designed to securely hold a laptop in a vehicle. The kit includes multiple parts, including screws, nuts, and arms, and is manufactured by National Products, Inc. The product can be purchased on rammount.com.
Product Usage
- Insert one screw (E) through each arm’s center slot. Secure with nut (G).
- Adjust the side arm position to accommodate your laptop’s thickness and to keep any needed ports open. Note the placement of the ridges when setting the arm height. Repeat this process for the remaining side arms, keeping the ridge placement consistent.
- Guide each nut into front nut pockets with a pen or pencil while connecting ball (included with vehicle kit). Thread all screws and nuts by hand first, then fully tighten.
- Ensure that the product is not installed near or over an airbag deployment area or in a location that obstructs the driver’s vision or interferes with vehicle operation.
- For additional mounting options, visit rammount.com.
Note : This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
Parts Index
Not to scale
INSTALLATION INSTRUCTION
Safety Precaution
Do not install this product near or over an airbag deployment area or in a location that obstructs the driver’s vision or interferes with vehicleoperation. National Products, Inc does not assume responsibility or liability for any such personal injury, death or property dam
To see more mounting options, visit rammount.com This
document, including images, may not be reproduced partly or fully without the
expressed written consent of National Products, Inc.
rammount.com
1.800.497.7479
support@rammount.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>