RAM MOUNTS HF5891 Zebra Tablet Holder Installation Guide
- June 1, 2024
- RAM MOUNTS
Table of Contents
RAM MOUNTS HF5891 Zebra Tablet Holder
Specifications
- Product Name: Zebra Tablet Holder
- Model Number: RMR-INS-ZE20SB
- Manufacturer: National Products, Inc
- Contact: rammount.com | 1.800.497.7479 support@rammount.com
Product Usage Instructions
- Ensure the area of installation does not obstruct the driver’s vision or interfere with vehicle operation.
- Avoid installing the product near or over an airbag deployment area.
- Refer to the part index for proper assembly and placement of components.
- Use the provided hardware (#10-24 x 5/8, #10-24 Nylock, #8-32 x 5/8, #8-32 Nylock) for installation.
- Secure the tablet holder in place using the specified components (x4 of #10-24 screws, x4 of #10-24 Nylock nuts, x4 of #8-32 screws, x2 of #8-32 Nylock nuts).
- Ensure all components are properly tightened to prevent any movement during use.
Safety Precaution
Do not install this product near or over an airbag deployment area or in a
location that obstructs the driver’s vision or interferes with vehicle
operation. National Products, Inc. does not assume responsibility or liability
for any such personal injury, death, or property damage. To explore additional
mounting options, visit RamMount.com. This document,
including images, may not be reproduced partly or fully without the expressed
written consent of National Products, Inc.Do not install this product near or
over an airbag deployment area or in a location that obstructs the driver’s
vision or interferes with vehicle operation. National Products, Inc. does not
assume responsibility or liability for any such personal injury, death or
property damage.
Part Index
Installation
To see more mounting options, visit RamMount.com This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>