itm M1 Series Digital Pressure Gauge User Guide
- June 4, 2024
- ITM
Table of Contents
m1 Quick Reference
M1 Series Digital Pressure Gauge
Power On
Zero
Backlight
Power Off
Note: Pressing the enter button always returns the gauge to operating
mode. If you want to set multiple Display Functions, press the setup button to
navigate from one Display Function to the next, then press the enter button
when you are done.
Gauge Setup Basics
Gauge
Setup Map
All units are not available with every pressure range.
- H20 icons and temperature settings will only display on H20-enabled units.
Gauge Setup Map
Note: Whenever one of the rd settings is selected, the battery icon will change indicating that the M1 is in Ultra Low Power Mode.
Troubleshooting
Err 1 displayed:
The M1 checks the internal calibration every time it’s turned on. Contact the
factory for further instructions.
Err 2 displayed:
The M1 has tried to display a number too large for the display due to an
electrical malfunction or numerical error. Contact the factory for further
instructions.
Err 5 o r Err 6 displayed:
The M1 pressure sensor is exhibiting behavior out of normal operating
conditions. Contact the factory for sensor replacement.
Note: If there is no gauge activity for 10 seconds, the gauge will return
to operating mode. Any Setup options that you have selected will be enabled.
crystalengineering.net
www.itm.com
[email protected]
1.800.561.8187
Documents / Resources
| itm
M1 Series Digital Pressure
Gauge
[pdf] User Guide
M1 Series Digital Pressure Gauge, M1 Series, Digital Pressure Gauge, Pressure
Gauge, Gauge
---|---