LiftMaster K94-37236 Adapter Solar Battery Harness User Manual
- June 13, 2024
- LiftMaster
Table of Contents
LiftMaster K94-37236 Adapter Solar Battery Harness
OVERVIEW
Refer to the manual for complete wiring instructions. Follow the instructions
according to your application.
For use with:
12V Operators: RSL 12VDC and RSW12VDC, and the LA412DC 33AH application with
the XLSOLARCONTDC control box only.
24V Operators: LA400DC, LAS00DC, CSL24VDC, and CSW24VDC
WARNING
To reduce the risk of SEVERE INJURY or DEATH:
- ANY maintenance to the operator or in the area near the operator MUST NOT be performed until disconnecting the electrical power (AC or solar and battery) and locking-out the power via the operator power switch. Upon completion of maintenance the area MUST be cleared and secured, at that time the unit may be returned to service.
- ALL electrical connections MUST be made by a qualified individual.
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
24V APPLICATIONS
Disconnect all power (AC, solar, battery) to the operator before servicing. NOTE: 10W 12V solar panels are illustrated in the image below.
33AH BATTERIES
7AH BATTERIES
ITEMS NEEDED FOR 24V APPLICATIONS
-
A J15 Plug
-
B Red wire tor 33AH battery connections
-
Black wire for 33AH battery connections
-
While Jumper wire tor 33AH battery connections
The remaining wires in the kit are not needed tor 24V applications.
ONE 7AH BATTERY
TWO 7AH BATTERIES
ONE 33AH BATTERY
-
J15 Plug
-
Red wire for 33AH battery connections
-
Black wire for 33AH battery connections
-
Red jumper wire for two 7 AH battery connections
-
Black jumper wire for two ?AH battery connections
The remaining wires in the kit are not needed for 12v applications.
©2014 LiftMaster
All Rights Reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>