PROS-00 Hunter Spray Body Instructions
- May 15, 2024
- Hunter
Table of Contents
PROS-00 Hunter Spray Body
Product Specifications
Legend
- HUNTER SPRAY BODY (PROS-00)Nozzle and cap per plan.
- FIELD BUILT SWING ARM Per installing contractor.
- FINISHED GRADE
- ADJACENT LANDSCAPE
- LATERAL FITTING PER PLAN
- HUNTER CHECK VALVE (HCV) Per plan.
- HUNTER STAKING KIT
- 1/2″ [13MM] REBAR
Minimum 18″ [45CM] unless noted otherwise (U.N.O.).
Description of Diagram
The diagram illustrates the installation of a shrub adapter (PROS-00) at grade level, which includes a swivel riser, a check valve, and an on-grade lateral. It is a schematic representation using symbols and lines to depict the components and their placement relative to the finished grade and adjacent landscape. A Hunter spray body with a nozzle and cap is indicated at the top of the setup, followed by a field-built swing arm, a lateral fitting according to the plan, and a Hunter check valve. The setup is secured with a Hunter staking kit and supported by a 1/2″ [13MM] rebar with a minimum length of 18″ [45CM] unless otherwise noted. The diagram is not to scale (N.T.S.).
Specifications
Component | Description | Notes |
---|---|---|
Hunter Spray Body (PROS-00) | Nozzle and cap assembly | As per design plan |
Field Built Swing Arm | Custom swing arm | Installed by the contractor |
Finished Grade | Surface level of the ground | |
Adjacent Landscape | Surrounding vegetation or ground cover | |
Lateral Fitting | Pipeline connection | As per design plan |
Hunter Check Valve (HCV) | Valve to prevent backflow | As per design plan |
Hunter Staking Kit | Support and stability for the system | |
1/2″ [13MM] Rebar | Steel reinforcing bar | Minimum length of 18″ [45CM] U.N.O. |
For additional resources and information, please visit Hunter Irrigation Sprinkler Systems | Hunter Industries.
- 1. Hunter Spray Body (PROS-00): Nozzle and Cap per plan
- 2. Field Built Swing Arm (Per Installing Contractor)
- 3. Finished Grade
- 4. Adjacent Landscape
- 5. Lateral Fitting per plan: Refer to plan min. 12″ [30cm] U.N.O.
- 6. Hunter Check Valve (HCV per plan)
- 7. Hunter Staking Kit
- 8. 1/2″ [13mm] Rebar min. 18″ [45cm] U.N.O.
Product Usage Instructions
- Hunter Spray Body Installation: Install the spray body with the provided nozzle and cap according to the plan.
- Field Built Swing Arm: Assemble the swing arm as directed by the installing contractor.
- Lateral Fitting Placement: Ensure lateral fittings are positioned according to the plan, with a minimum distance of 12″ [30cm] from other components.
- Hunter Check Valve Installation: Install the check valve as per the plan specifications.
- Staking Kit Usage: Utilize the staking kit to secure components in place.
- Rebar Installation: Place the 1/2″ [13mm] rebar at a minimum depth of 18″ [45cm] U.N.O. for stability.
RUB ADAPTER (PROS-00) AT GRADE WITH SWIVEL RISER, CHECK VALVE, AND ON-GRADE LATERAL
Frequently Asked Questions (FAQ)
Q: Where can I find more detailed installation instructions?
A: For detailed installation instructions, please refer to the user
manual provided with the product or visit our website at
www.hunterindustries.com.
Where can I find more information about Hunter Irrigation Sprinkler Systems?
More information about Hunter Irrigation Sprinkler Systems can be found on
their official website at
www.hunterindustries.com.
What is the purpose of the Hunter Staking Kit?
The Hunter Staking Kit is used to provide support and stability to the sprinkler system components above the ground.
What does 'U.N.O.' stand for in the context of the diagram?
'U.N.O.' stands for 'Unless Noted Otherwise' and is used to indicate that the length of the rebar should be a minimum of 18
Is the diagram to scale?
No, the diagram is not to scale N.T.S., which means it is a symbolic representation and not an exact depiction of the component sizes or distances between them.
Can I use the product without the swing arm?
The swing arm is an essential component for proper functioning. It is recommended to install it as per the instructions provided.