LEAGOO S001 Automatic Executive Home Office Chair Instruction Manual

June 14, 2024
LEAGOO

LEAGOO -LOGO

LEAGOO S001 Automatic Executive Home Office Chair

LEAGOO -S001 -Automatic- Executive- Home -Office -Chair
-PRODUCT

Thank you for purchasing the LEAGOO OFFICE CHAIR. Before you start, please read the following installation recommendations carefully:

  1. We suggest you spend a short time reading the manual and then follow the instructions step-by-step;
  2. Owing to the size and weight of the chair, we recommend assembled by 2 adults, on a carpeted or padded area, in the room that it is intended for. Approximate assemble time: 20 minutes;
  3. Please do not use any tools other than those provided or recommended in the instructions;
  4. Please do not throw away any of the package or the instructions until you the furniture is fully assembled. Please ensure that the package is disposed of in a safe and environ­mentally friendly way.
  5. Please do not tight the screw until all screws are lined up with hole and try to tight it loosely initially in all screws then tight a little bit more in all screws do not overtight one screw that will make other screw hard to tight but tight all screw firmly in the end.
  6. Please keep all pieces out of reach of the children.

Components

ACCESSORIES

STEP 1

LEAGOO -S001 -Automatic- Executive- Home -Office -Chair
-FIG-3

STEP2

STEP3

STEP4

STEP5LEAGOO -S001 -Automatic- Executive- Home -Office -Chair
-FIG-7

STEP6LEAGOO -S001 -Automatic- Executive- Home -Office -Chair
-FIG-8

STEP7LEAGOO -S001 -Automatic- Executive- Home -Office -Chair
-FIG-9

INSTRUCTIONS

Pull the lever on the left of the seat to adjust the height.

  1. Adjustment Button
  2. Reset Button
  3. USB Charging Port
  4. Battery Charging

Press button 1 to tilt, release button
1 to lock at any angle between 90°-160°. Press button 2 to restorative angle.

BATTERY INSTRUCTIONS

Input AC 100-240V 50-60HZ
Output DC 25.9V

  1. When the battery power is less than or equal to 10%, the buzzer will beep every 2 seconds to give an alarm, and the indicator light turns blue at the same time.
  2. When the battery is exhausted, the battery will cut off the output completely, the buzzer will stop alarming, and the indicator light will turn blind
  3. Plug in the charging cable, the indicator light turns red, indicating that it is charging, and the chair restores adjustment when the red light is on.
  4. After the battery is fully charged, the indicator light will turn green, and the buzzer will beep twice continuously every 9 seconds to remind you that the battery is fully charged.
  5. During the discharge process, when the current reaches3-6.5A, the chair will continuously beep, beep, beep, beep~ rushing alarm sound, reminding that the current has exceeded 3A.
  6. When the output current exceeds 6.5A, the output will be cut off immediately to protect the battery from being damaged by overcurrent.
  7. The battery pack has output short circuit protection, if there is a short circuit, the output will be cut off immediately. After the short circuit problem is solved, plug the charging plug into ACll0V for 10 seconds to restore the output.
  8. The battery pack has built-in discharge over-temperature protection, the maximum discharge temperature is 154.4°F, and the discharge above 154.4°F will be cut off immediately.
  9. The battery pack has built-in charging over-temperature protection, the charging temperature range is 14 ‘F~ 122 °F, over-temperature the charging process will be cut off immediately.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals