Canshengda 2BDG8CSDEMS CSDEMS Bluetooth Headset User Manual
- June 14, 2024
- Canshengda
Table of Contents
USE R MANUAL
FCC ID: 2BDG8CSDEMS
Headset overview
[Earphone illustration]
Remarks : Subject to material object
This product can only be worn on the right ear.
Devios notconneded afler powes on, Double ik the muliuncton key to switch
between Chinese and Engish modes
[ Earonons Packase Contants ]
- 1 hanping Bluetooth Esrprane
- 1 Usago Monval
- 1 USB Cable
Headset overview
[Charging and battery]
- Before charging, Please turn offthe headset irst.
- Plug the USB charging cable into the headsel charging interface, Plug the USB at the other end into a USE charger or other charging device Al this ime, the headse starts to charge. When charging, the bluo breathing light jumps on
- The headset is fully chargad, which takes about 1 hour.
The blue ight is always on after it is full.
Warning: you must use the matching charging cable fo charge theheadsel The charging standard s that the DC 5V currentis 100mA
[Bluetooth pairing steps]
- Please control the distance between the Bluetooth headset and the mobile phone (or other devices used for connection) within 1 meter, the closer the better.
- Press and hold the headset multifunction key for 3 seconds, and the blue light flashes to enter the pairing state.
- Turn on the Bluetooth search function of the mobile phone or other required connecting devices, Select “Bluetooth” from the Bluetooth list of the mobile phone and click to pair, (some mobile phones enter “0000” as the pairing password), The Bluetooth headset will automatically connect with the mobile phone. The blue light on the connection is off, and the voice reminder is connected.
Headset overview
[[Disconnect the Blustooth connection between the headset and the mobile: phone: please use any of th following methods ]
-
Turn off the Biuetaoth function of the mabile phone or ong press the multi-funciion key of the headset unilthe biue light goes out, and the Readset il turn of automatically.
[Reconnect the paired headset to the phone] -
At the same time, turn on the Bluetooth search function of the mabie phone orother devices that need 1o be connacted, The Bluetooth headsetwil automaticalyreconnect wit the as! connected mobile phone.
Note: the pairing fime of Blustooth headsst s about 5 minutes at most.
If the light i of. Indicates that Bluetooth pairing status has stopped.
If you are sl not paired successiully, please retry steps 1 1030 pair.
[Function operation]
[Power on/off] Press and hld th funcion keyfor 2 seconds 1o power o, andpress and hold the function key for 3 seconds o pawer of’
[Answer a cal] Briefy press the function key i the incoming state
[Reject an incoming call ] Press and hold the function key for 2 seconds to release in the incoming state
[ Hang up] Briefly press the function key in the call status
Headset overview
[Function operation]
[ call back] Double click the function key once in the connected state
[ Music play / pause] Click the multifunction key to play or pause music
[ Volume adjustment and song selection] When music is playing: Short
press + /- to adjust the up and down curves
Long press +/- to adjust the volume
[Technical parameter]
- Version: 5. 3
- Transmission distance: 10 meters straight without obstruction
- Unit Size of Horn: 10MM&13MM
- Frequency: 20Hz-20,000Hz
- Resistance: 32Q
- Sensitivity: 108+ 3dB
- Charging Specification: DC5V
- Operation Voltage: 3. 3V-4. 2V
- Supported Agreement : A2DP/HFP/SPP/HID/PBAP
- Texture: ABS
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one ormore ofthe following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.