croydex AP502922 Stainless Steel Fold Away Hand Rail with Leg Instruction Manual
- May 15, 2024
- Croydex
Table of Contents
croydex AP502922 Stainless Steel Fold Away Hand Rail with Leg
Product Information
Specifications:
- Product Name: Foldaway Hand Rail with Drop-Down Leg
- Models Available:
- AP502922 – 850mm White Powder Coated
- AP502931 – 850mm Grey Powder Coated
- AP502941 – 850mm Stainless Steel
- Tools Required (not supplied): Pencil, Tape Measure, Screwdriver appropriate to fixings, Spirit level, Drill, Masonry drill bit appropriate to fixings, Ceramic drill bit (optional)
Product Care:
To retain the best quality finish, clean the product regularly with a soft
damp cloth. Do not use abrasive or chemical cleaners as these will damage the
product.
Product Location:
Hand rails are only as strong as the wall to which they are fixed and the
fixings that are used. Ensure suitable fixings are purchased that are
compatible with the wall construction materials.
Installation Instructions:
- Identify the most appropriate position for the foldaway handrail ensuring it is at a comfortable height and distance from the toilet pan.
- Ensure the leg is fully extended, resting on the floor and level. Adjust the leg extension height if needed.
- Fold the product upwards for convenient storage, ensuring space above for this.
- Place the hand rail on the wall, mark screw fixing positions ensuring level, then drill holes.
- Insert wall plugs flush to the surface or below tiles if applicable.
- Screw the rail to the wall, taking care to avoid trapping body parts when moving between positions.
FAQ:
-
Q: What should I do if I have lightweight thermal blocks or aerated hollow brickwork walls?
A: For such walls, additional backboards on the outside or strengthening of internal structures may be needed to provide adequate wall strength. -
Q: Can I use abrasive cleaners to clean the product?
A: No, only clean the product regularly with a soft damp cloth to maintain its quality finish.
INSTRUCTION
Thank you for purchasing this Croydex product. Please follow the fixing and
care instructions to ensure your hand rail is fitted safely and retains its
high quality finish.
Please retain this leaflet for future reference.
This installation guide applies to the following hand rails:
- AP502922 – 850mm White Powder Coated Foldaway Hand Rail with Drop Down Leg
- AP502931 – 850mm Grey Powder Coated Foldaway Hand Rail with Drop Down Leg
- AP502941 – 850mm Stainless Steel Foldaway Hand Rail with Drop Down Leg
Tools required – not supplied
Pencil; Tape Measure; Screwdriver appropriate to fixings; Spirit level; Drill;
Masonry drill bit appropriate to fixings, Ceramic drill bit (optional)
appropriate to fixings.
KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN
Note: Please ensure suitable fixings are purchased that are compatible with
wall construction materials.
Home Safety Advice
- It is recommended that two people fit this product to ensure that it is fitted safely.
- Always take care when using power tools, particularly in the bathroom.
- Always check for hidden cables and pipework before drilling and take extreme care if there is any water in the working area.
- It is advisable to use a residual current circuit breaker (RCCB).
- Always wear suitable eye protection when drilling.
- If the product is to be fitted on a ceramic tiled wall, a ceramic drill bit should be used.
- Always ensure that the drill hole passes through the central tiled area rather than through the grouted area. To prevent damage to the tile, mask the area around the hole with tape before drilling.
- Do not strike the product with hard or sharp objects.
Product Care
- To retain the best quality finish, clean product regularly with a soft damp cloth.
- Do not use abrasive or chemical cleaners as these will damage the product.
Product Location
Hand rails are only as strong as the wall to which they are fixed and the
fixings that are used.
For different wall types you will need to ensure that you are using the
correct type of fixing for the material of the wall.
The addition of backboards on the outside of the wall or appropriate
strengthening of internal structures may be required to provide adequate wall
strength.
NOTE: If the wall is made of lightweight thermal blocks, aerated hollow
brickwork or prefabricated partitions even the most appropriate fixings may
not be able to withstand the loads which can be suddenly applied to hand
rails.
Fitting Instruction
-
Identify the most appropriate position for the foldaway handrail ensuring the product is at a comfortable height and distance from the toilet pan.
NOTE: When determining the most appropriate position for the foldaway rail ensure the leg is fully extended, resting on the floor and level. The leg extension height can be adjusted by removing the locking pins. Once the ideal height has been determined re-insert the locking pins to secure the legs in position (See Fig.1). -
The product can be folded upwards for more convenient storage so please ensure there is sufficient space above the fixing position to allow for this.
-
Place the handrail in position on the wall and using the hole centres located on the wall bracket as a template, mark the screw fixing positions on the wall surface ensuring the product is level.
-
Drill the holes in the marked positions using a masonry drill. If the product is to be fitted onto a ceramic tiled wall, a ceramic drill bit should be used.
-
Insert wall plugs (if applicable) flush to the surface of the wall. If fitting to a tiled surface, the wall plugs should be inserted below the surface of the tile to avoid cracking (See Fig.1).
-
Insert the screws through the holes located on the wall bracket and screw to the wall.
IMPORTANT: Please take care to avoid trapping body parts when moving the rail between its stowed position and its in-use position.
Additional Information
This product must only be fitted to solid brick, concrete block walls or
similarly strong materials offering appropriate support for the maximum safe
working load.
The maximum safe working load for the handrail is 150kg.
For details of the other items in the Croydex range please visit our website:
www.croydex.com
Croydex, Central Way, Andover, Hants, SP10 5AW, UK
Tel: +44 (0) 1264 365881
Fax: +44 (0) 1264 356437
Email: info@croydex.co.uk
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>