Parmedu BK020 Digital Kitchen Scale User Guide

Parmedu BK020 Digital Kitchen Scale

Specifications:

• Equipped with high precision strain gauge sensor system
• Touch panel switch
• Stainless steel platform
• Capacity: 5 kg
• Division: 1g / 0.05oz / 1ml
• Tare function
• Manual on / Auto off / Manual off
• Units: g / oz / ml / lb:oz (ml for water or milk only)
• Auto zero resetting
• Over-load / Low power indication
• Power: 1 x 3V CR2032 battery (included)

Product Usage Instructions

Key Functions:

• UNIT key: Press to change the unit (g/oz/lb:oz/ml)
• TARE key:
  • Switch on/off function
  • Tare function
  • Unit changes (g/oz/lb:oz/ml)
  • Ml Measurement

Operation – Weighing:
Step 1: Place the scale on a hard & flat surface.
Step 2: Press TARE once, the LCD display will show zero.
Step 3: Put the food on the platform, the weight will be displayed.

Tare Function:
Step 1: Put the container on the platform, the LCD display will show the weight of the container.
Step 2: Press TARE to clear the weight of the container (reset to zero). Then put the food into the container, the LCD display will show the weight of food only. Repeat pressing TARE to weigh more different foods.
Step 3: The LCD display will show the negative value of the container if you remove the food and container from the platform together. Please press TARE again, the display will show zero in 2 seconds.

Please Note:
If tare weight is less than 100g, it will show [error]. If tare weight is more than 100g, it will show [error].

FAQ:

• Q: How do I insert the battery?
  A: [Insert battery instructions here]

• Q: What error indications should I be aware of?
  A:
  

  • When low power, it will show [indication].
  • When the scale is not stable before weighing, it will show [indication].
  • When the scale is over-load (more than 5kg), it will show [indication].

Advice for Use and Care

• Placing the scale on a hard & flat surface to ensure the greatest accuracy and replicability.
• Don’t drop or subject the scale to shocks as this may damage the unit.
• Don’t use chemical abrasive cleaners.
• Clean the scale with a damp cloth, but don’t allow water to enter the unit.
• To ensure the life of the scale, please don’t put it in the wet and hot environment.
• Please remove the battery from the scale if it has not been used for a long period.
• If it doesn’t work when you open the scale, please check the battery and ensure the battery is with correct polarity. Please check if the battery need to be changed when the scale have been used for a long time, then try to start it again.
• This scale is for family use only and should not be used commercially for any reasons at all.
• Please ensure no water on the key.
• Don’t be stacked on the scale.

Due to continuous improvements, this product is subject to change without notice. Product appearance, color, if changes, according to the real object please.

Specifications

Equipped with high precision strain gauge sensor system Touch panel switch Stainless steel platform

• Capacity: 5 kg
• Division: 1g / 0.05oz / 1ml

Tare function
Manual on/ Auto off/ Manual off

• Units: g / oz / ml / lb:oz (ml for water or milk only) Auto zero reseting

Over-load / Low power indication

• Power: 1 x 3V CR2032 battery (included)

Thank you for your purchase.
For the proper using & maintaining the scale, please read this instruction completely before opera?ng.

Key Function

Switch off

• The scale will switch off after press” TARE ” for 2 seconds.
• The scale will automatically switch off after approximate 60 seconds when no operation.

Unit changes (g/oz/ lb:oz/ml)

• Press” UNIT ” once, the unit will be exchanged from g /oz/ lb： / water (ml)/ milk(ml).

Ml Measurement
Put a container on the platform, press ” TARE ” to clear the weight of container. Then put water or milk into it, press” UNIT ” till ml to check the volume.

Operation

Weighing
Step 1: Place the scale on a hard & flat surface.
Step 2: Press “TARE” once, the LCD display will show zero.
Step 3: Put the food on the platform, the weight will be displayed.

Tare function
Step 1: Put the container on the platform, the LCD display will show the weight of the container.
Step 2: Press “TARE” to clear the weight of the container (reset to zero). Then put the food into the container, the LCD display will show the weight of food only. Repeat press “TARE” to weight more different foods.
Step 3: The LCD display will show the negative value of container if you remove the food and container from the platform together. Please press “TARE” again, the display will show zero in 2 seconds.

Please note:

• If tare the weight less than 100g, it will show
• If tare the weight which more than 100g, it will show

Insert the Battery

• Open the battery cover.
• Install 1 x 3V CR2032 lithium battery as shown.
• After installing the battery, put back the battery cover and push the cover backward.
• Please be aware that the incorrect polarity will cause the permanent impact on the electronic parts.

Error Indication

• When low power, it will show
• When the scale is not stable before weighing, it will show
• When the scale is over-load (more than 5kg), it will show

MADE IN CHINA
Website: www.parmedu.com
Email: customer@parmedu.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>