Parmedu CK013 Gravity Electric Salt and Pepper Grinder Set User Manual

Table of Contents

Model No. CK013
USER MANUAL
GRAVITY ELECTRIC GRINDER SET

Thank you for purchasing the gravity electric grinder set.

To ensure safety and maintain the high quality of the product, we recommend that you read and follow the instructions carefully.

Do not immerse the appliance in water or any other liquid to avoid harm to human or the product.
Use for pepper and salt only, please do not use for other purposes.
Do not force the grinder to tighten or twist it or attempt to speed up the mechanism.
Keep body parts (e.g. finger)and utensils away from the grinding head to avoid damage. Please hold the grinder tightly when using.
Keep this product away from children
Do not dismantle the product by yourself, or otherwise warranty will be invalid
Keep away from flammable, explosive gas, high temperature

Parmedu CK013 Gravity Electric Salt and Pepper Grinder Set - PRODUCT
DESCRIPTION

1.Grinder Knob	4.0N/OFF Button
2.Container	5.Type-C Charging Cable
3.Charging Socket	6.Cleaning Brush

Connect the Type-C charging cable with an adapter, plug the adapter into an electric socket,then connect the charging cable to the Type-C interface at the back of the grinder.
When charging, the indicator light lights up, indicating discharging normally.
The indicator light stops lighting when the battery is fully charged.
It takes about 2 hours to fully charge.

CAUTIONS

Before charging, please tum off the button of the grinder or place the grinder vertically to avoid starting the grinding function of the product during charging
Adapter is not included with this product. Charge only with UL/GS or equivalent safety approved adapters with output voltage of 5V=.
When the product has not been charged for a long time, the battery may be completely exhausted. At the beginning of charging, the charging indicator may not light up immediately, and it may take about five minutes for the charging indicator to start lighting up.
The container of the product can be cleaned by rinsing with clean water, but do not soak it or put it in a dishwasher. (Note: Do not rinse the main unit with water)

Push the button to tumn off the power of the grinder.
Hold the grinder tightly, rotate and open the container according to the indication icons.
Put pepper or salt into the container, attach and lock the upper body and container by rotating reversely.
Rotate the grinder knob to adjust the coarseness according to personal preference.
Turn the button on
Flipped the grinder over, and it wil automatically start grinding
In daily use, the switch of the machine should always be in the state of ON (that is, no need to set to OFF after each use). In the non-working period, even in the state of ON will not consume power or affect the life of the machine. When the material needs to be refilled, or the machine needs to be taken out, please set the switch to OFF state.
This product adopts an adjustment knob. The adjuster could be rotated between the fines and the coarsest grinding.
Adjust to Fine: Rotate the adjuster from COARSE to FINE, continue to rotate until the desired fineness is achieved
Adjust to Coarse: Rotate the adjuster from FINE to COARSE. If the adjuster loosens, it could be caused by some pepper grains stuck in the burr. Start the product to rotate, then the burr will be loosened and you can continue to adjust. This is a normal situation of ceramic burr and will not affect its normal use

If the grinder does not work or stops during grinding after flipping the grinder over

Please check whether the ON/OFF button is turned on
Please charge it before use. (Note: It is not recommended to use the product while charging.)
Please adjust the grinder knob with counter-clockwise direction.

If the above operations are all correct and the grinder still works abnormally, please contact the seller at customer@parmedu.com.

MADE IN CHINA
www.parmedu.com
customer@parmedu.com