MORNINGSTAR SureSine 150 Wave Inverter User Manual

May 15, 2024
Morningstar

MORNINGSTAR-LOGO

MORNINGSTAR SureSine 150 Wave Inverter

MORNINGSTAR-SureSine-150-Wave-Inverter-PRODUCT

Specifications

  • Brand: Morningstar
  • Product Line: SureSine Inverter Series
  • Available Models:
    • SureSine 150: 12V – 150W
    • SureSine 300: 12V, 24V – 300W
    • SureSine 700: 12V, 24V, 48V – 700W
  • AC Output:
    • On: 120V, 127V, 220V (60 Hz) / 230V (50 Hz) +/-5% V
    • Off: Pure Sine Wave
  • Efficiency:
    • SureSine 150: 89%
    • SureSine 300: 90%
    • SureSine 700: 91-92%

Product Usage Instructions

Installation

  1. Ensure the inverter is placed in a well-ventilated area with sufficient clearance for heat dissipation.
  2. Connect the inverter to the appropriate power source based on the model and voltage requirements.
  3. Follow the provided wiring diagram to connect the inverter to the battery bank securely.

Operation

  1. Turn on the inverter using the power switch located on the device.
  2. Monitor the AC output to ensure it is within the specified voltage range.
  3. In case of any abnormal operation or error codes, refer to the user manual for troubleshooting steps.

Maintenance

  1. Regularly inspect the inverter for any signs of damage or loose connections.
  2. Clean the exterior of the inverter using a soft cloth and mild detergent if necessary.
  3. Check and tighten the terminal connections periodically to prevent voltage drop issues.

FAQ

  • Q: How can I determine the appropriate model for my power requirements?
  • A: You should assess your power needs in watts and choose a model that can handle your peak power consumption comfortably. Refer to the specifications for guidance.
  • Q: What should I do if the inverter overheats during operation?
  • A : Immediately turn off the inverter and allow it to cool down before attempting to use it again. Check for any obstructions to airflow around the inverter.
  • Q: Can I connect multiple devices to the inverter simultaneously?
  • A: Yes, but ensure that the total power consumption of all connected devices does not exceed the rated output of the inverter to avoid overloading.

Introduction

  • Superior Industrial Grade
  • Remote Control via Dry-Contact
  • Industry-Leading Safety, Low-Noise, High Performance
  • Fanless Convection Cooling

Since 1993 the name Morningstar has been synonymous with industry-leading charge controllers, used in mission-critical applications around the world. With that heritage and reputation, “Morningstar of Inverters” has a very high bar to meet. The new SureSine line was conceived for exactly that reason: meeting customer requests for a Morningstar inverter that’s equal to the quality and performance of our charge controllers. These new models are more than up to that task.

KEY FEATURES AND BENEFITS

  • Inverter Functions: DC/AC conversion with pure sinewave output
  • Superior industrial-grade product design and manufacturing
  • Engineered for system-level integration and communication with Morningstar charge controllers
  • Communication ports: RS485 USB, Ethernet, MS-CAN, Blue-tooth while using industry-standard MODBUS protocol
  • Wireless Android and iOS utility apps included for set-up and monitoring with remote devices
  • AC hardwire terminal option available on selected models (all power ranges and frequencies)
  • Remote On/Off improves safety and enables control in inaccessible locations
  • Auxiliary Power Output (700-2500 W models) provides power for an EIA-485 bus or other small DC loads
  • Overbuilt, industrial-grade low-frequency transformer for improved sinewave stability
  • Fanless convection cooling with extruded aluminum heat sinking, for maximum efficiency and reliability
  • Status LEDs for both System and AC Sinewave output, to ensure reliable operation and notify of any system alerts
  • Industry-leading safety, low-noise and high-performance NRTL certifications for reliability and system conformance
  • Configuration can be achieved via manual DIP switch configuration or digitally programmable custom setpoints

MORNINGSTAR-SureSine-150-Wave-Inverter-FIG-2

  • Communication ports include Ethernet, USB, MS-CAN
  • The inverter can be configured either manually via a DIP switch or digitally programmed with custom setpoints

Specifications

Specifications SureSine Inverter Series
MORNINGSTAR-SureSine-150-Wave-Inverter-FIG-1

Product Model Number Guide

Here’s what the different letters and numbers represent in our SureSine Model Number, using an example of a SureSine inverter rated for 150W and 12 volt batteries with 120 volt AC output at 60 Hertz with a Type B AC output receptacle.

MORNINGSTAR-SureSine-150-Wave-Inverter-FIG-5

MORNINGSTAR-SureSine-150-Wave-Inverter-FIG-6 AC options include:

  • Hard-wire terminals for all markets and power levels
  • Type B for North America 150, 300, and 700W versions
  • Universal for International 150, 300, and 700W versions

Wireless Android and iOS utility apps included for set-up and monitoring with remote devices With over 1,600 off-grid inverters* already on the market from our competitors, we had to make sure that our six new ones raised the bar. Meet the result.
Our new SureSine inverters start with the industrial-grade “overbuild” quality and precision engineering that made Morningstar the industry leader in off- grid solar over the past three decades. Next, we added our customers’ wish list of inverter features and technologies. Finally, we designed the performance and safety needed to achieve industry-leading NRTL conformance certifications— unique in this class of inverters. SureSine is the inverter line our customers asked us to build. And our competitors will wish we hadn’t. Multiple DC/AC configurations mean there’s a SureSine ideal for your next project. Contact Morningstar to learn more at www.morningstarcorp.com

MORNINGSTAR-SureSine-150-Wave-Inverter-FIG-9

source: ENF Solar industry company and product directory 2022 https://www.enfsolar.com/pv/inverter

  • Six all-new inverter models from 150 to 2500 Watts; 120 or 230V output, 12, 24 or 48V DC input options
  • Superior industrial-grade design “overbuilt” in the Morningstar tradition, including a low-frequency toroidal transformer for improved sinewave stability
  • Engineered for system-level integration with Morningstar charge controllers
  • Full communications capabilities: Bluetooth, RS-485, USB. Ethernet, MS-CAN while using MODBUS protocol
  • AC hardwire terminal options on selected models
  • Fanless convection cooling with extruded aluminium heat sinking, for maximum efficiency and reliability

Wireless Android and iOS utility apps included for easy set-up and monitoring with remote devices

CONTACT

  • www.morningstarcorp.com
  • MS-003710 07-26-2023
  • 8 Pheasant Run, Newtown, PA 18940 USA
    Due to Morningstar’s policy of continuous improvement, product availability, features and specifications are subject to change without notice.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals