edostory 6V Electric Ride On Bumper Car for Kids Instruction Manual

: May 15, 2024
: Edostory

Table of Contents

edostory 6V Electric Ride On Bumper Car for Kids
Safety Instruction
Parts and Feature
User Instruction
Care and Maintenance
Troubleshooting
Read User Manual Online (PDF format)
Download This Manual (PDF format)

edostory 6V Electric Ride On Bumper Car for Kids

edostory-6V-Electric-Ride-On-Bumper-Car-for-Kids-
product

ATTENTION

This product is packed with the battery disconnected. Connect the battery before use.
This manual contains important safety, performance and maintenance information. Read the manual before allowing your child to ride your new electric ride-on toy. Keep the manual handy for future reference.

Safety Instruction

When using electrical products, basic safety precautions should always be followed including the following.

Read all Instructions before use

To Protect against electrical shock, do not immerse the cord, charger, transformer, battery, or product in water or other liquid.
Only use charging devices, transformers, and batteries provided or recommended by the manufacturer. For your children’s safety, the product should by assembled by adult.
This toy is not intended for children below 18 months.
Close supervision is necessary when your children is using the product.
Unlatch the battery if not been used for a long time.
Do not use this product as a traffic tool.
Do not use this product on public roads, raceways, swimming pools, or at any potentially dangerous places.
Do not use this product on slippery surfaces.
Always keep hands, hair, and clothing away from moving parts.
The maximum user weight for this product is 66 lb/ 30 kg.
Do not change, modify, or add any electrical wiring on this product.
Avoid using this product in tight environment to prevent damage to the product or injury to the user. Do not use this product in the dark. Only operate this product during the daytime or in well-lit area.
For your child’s safety, pis make sure to fasten the seat belt when using this product.

Note:

When charging, you mush turn off the power switch.
It is recommended to charge 8-12 hours before the first use, but not more than 20 hours.
When the speed of the vehicle is significantly slowed during normal driving, the battery power is insufficient. Please charge it in time.
Please charge 6-8 hours after each use, but do not exceed 10 hours.

Parts and Feature

$edostory-6V-Electric-Ride-On-Bumper-Car-for-Kids-fig- $2$$

Vehicle Body
Seat Cover
Seat Belt
Control Stick
Power Button
Music Button *4
AUX
USB
Charging Port
Remote Control

User Instruction

$edostory-6V-Electric-Ride-On-Bumper-Car-for-Kids-fig- $3$$

Unscrew the screw and remove the seat cover. Connect the battery terminal.(Red to red, black to black)
Replace the seat cover and tighten the screws.
lnstall the joystick hand.
Secure the joystick with screws.
Press the backrest down into the slot.
installation is complete.

Operating the vehicle

Press the power switch to turn on the vehicle.
Push or pull the control sticks to move the vehicle.
Release the control stick back to the center position to stop.

Using the remote control
The remote control should only be used by adult.

Frequency Binding
The remote control needs to be frequency bind for the first time usage or after replacing the battery.

Insert batteries into the remote control.
Press the” M “button for 2-4 seconds, the indicator will flash.
Turn on the power of the vehicle, the indicator should change to a solid light.

lf failed to bind, remove, and replace the battery from the remote control and repeat the previous steps.

Control the vehicle

For your ch lid’s safety, pis make sure to fasten the seat belt when using this product.
Press the directional buttons to move the vehicle.
Press the” P “button to enable emergency brake. All running functions will be disabled once the button is pressed. Press the” P “button again to disable it.

NOTE : The remote control will go into power-saving mode if not used after 10 seconds.

WARNING

Close supervision is needed when children is operating the vehicle.

Charging the battery

Plug the charger to the charging port.
Fully charge the battery for 6-8 hours.
Do not charge the battery for more than 10 hours.
Make sure the battery and charger is not damaged. Do not charge if any sign of wear or damage is found.

Care and Maintenance

Check the product regularly and make sure there is no missing or loose parts. Re-tighten any loose parts if necessary.
Make sure there are no cracked or broken plastic parts.
When not using store the product away from the heat source, cover it with a tarp, and away from wet weather.
Turn off the product and disconnect the battery if the product is not used for a long period. Clean the vehicle with a cloth. Use a non-wax furniture polish to restore shine to plastic parts. Do not use abrasive cleaner.
Do not wash the product with a hose or immerse any parts in water or other liquid.
Occasionally use lightweight oil to lubricate moving parts.