Edostory EDOBPCT001 Baby Portable Changing Table Instruction Manual
- June 15, 2024
- Edostory
Table of Contents
BABY PORTABLE CHANGE TABLE INSTRUCTION
EDOBPCT001 Baby Portable Changing Table
-
Note: During installation, Part 4 should be on the left side and Part 3 should be on the right side, otherwise the subsequent steps. may not be successful.
-
Install Part 5 on the side with the shorter spacing.
-
Install Part 6 on the side with the longer spacing.
-
Thread Parts 7 and 8 through Part 10.
-
Use screws to install Part 7 on the side with the shorter spacing, and install Part 8 on the side with the longer spacing using screws as well.
-
After installing Part 11, use the two safety buckles on the bottom of the table for securing and use the safety locks on Parts 3 and 4 to lock them in place.
To fold the diaper changing table, first remove the PP board from the middle layer, Release the safety locks on Parts 3 and 4.