D-Link 7200-2000AC 2000 W Redundant AC Power Supply Instruction Manual
- June 4, 2024
- D-Link
Table of Contents
Building Networks for People
D-Link
7200-2000AC
2000 W Redundant AC Power Supply for the DES-7206/7210 Chassis
Quick Installation Guide
Package Contents
- 7200-2000AC redundant power supply
Connecting the Redundant Power Supply
Install the 7200-2000AC redundant power supply into the slot intended for
connecting a redundant power supply module on the DES-7206 or DES-7210
chassis. Connect the AC power cord to the power input of the 7200-2000AC
redundant power supply. Plug the other end of the AC power cord into a
grounded power outlet.
Rules and conditions for safe operation
Please read this section carefully before installing and connecting devices.
Make sure that the device and cables do not have mechanical damage. The device
must only be used for its intended purpose, according to the installation
manual.
The device is intended for use in a dry, clean, dust-free, and well-ventilated
area with normal humidity, away from powerful heat sources. Do not use it
outdoors or in places with high humidity. The ambient temperature in the
immediate vicinity of the device and inside its housing must be between 0 and
+40 ºC.
The power supply must comply with the power supply parameters specified in the
device specifications.
Do not open the case of the device! Before cleaning the device from dirt and
dust power off the device. Remove dust with a damp cloth. Do not use
liquid/aerosol cleaners or magnetic/static devices for the cleaning. Avoid
getting moisture into the device.
The service life of the device is 2 years.
The warranty period is calculated from the date of purchase of the device from
official dealers in Russia and the CIS countries and is one year.
Regardless of the date of sale, the warranty period cannot exceed 2 years from
the date of manufacture of the product, which is determined by the 6 (year)
and 7 (month) digits serial numbers indicated on the technical data label.
Year: C – 2012, D – 2013, E – 2014, F – 2015, G – 2016, H – 2017, I – 2018, J
– 2019, 0 2020, one – 2021.
Month: one – January, 2 – February, …, 9 – September, A – October, B –
November, FROM – December.
If you find a malfunction of the device, contact the service center or
D-Link technical support team.
Connecting the power supply
Install the 7200-2000AC in the chassis redundant power module slot DES-7206
or DES-7210. Connect the AC power cable to the connector 7200-2000AC Redundant
Power Module and a grounded electrical outlet.
Specifications
Hardware
Output power| 1200W at 90~175V
2000W at 176~264V
---|---
Backup support food| 1+1 with 7200-1200AC and 7200-2000AC
Input range stresses| 90 V to 264 V AC
Input frequency range mains voltage| 47 Hz to 63 Hz
Operating conditions
| MTBF (hours) hours) | 164 512 |
|---|---|
| Temperature | Operating: 0 to 40 °CC |
Storage: -40 to 70°C
Humidity| Operating: 10% to 90% non-condensing
Storage: 10% to 90% non-condensing
Technical support
Software updates and documentation are available on the website D Link. D-Link
provides free customer support for the warranty period. Customers can contact
the technical support team at D-Link by phone or via the Internet.
D-Link technical support works around the clock every day except on public
holidays. The call is free throughout Russia.
D-Link technical support:
8-800-700-5465
Online technical support: http://www.dlink.ru
e-mail: support@dlink.ru
Manufacturer: D-Link Corporation, 11494, Taiwan, Taipei, Neihu District,
Xinghu 3 Road, No. 289 Authorized representative, importer:
D-Link Trade LLC
390043, Ryazan, Shabulina Ave., 16
Tel.: +7 (4912) 575-305
Office address in Russia:
Moscow, Grafsky lane, 14
Tel.: +7 (495) 744-00-99
e-mail: mail@dlink.ru
Version 1.0 2017-11-29
Information in this document is subject to change without notice.
© 2021 D-Link Corporation. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>