Zamkol ZK106 Wireless Stereo Speaker User Manual

ZK106 Wireless Stereo Speaker
User Manual

Accessories

Specifications and Parameters

Model:
Bluetooth Version:
Transmission Range:
Input Power Supply:
Frequency Response:
Horn Size:
Distortion:
Playtime:
Charging Time:| ZK106
5.0

20m (open place)
5V/2A
115HZ-15kHZ
48mm
<1.0% >
24 hours (@70db SPL/40% Volume)
3hours
---|---

Button Configurations

1. Power On/ Off/ Activate SIRI Voice Assistant Function
2. Volume – / Previous track
3. Play / Pause key
4. Volume +/ Next track
5. EQ-Effect Switch/ Mode Switch
6. Status Indicator LED
7. Power Indicator LED
8. AUX In
9. Type-C Charge Port

Key operation

2. In power-on state, long press 2 seconds to turn off.
—| Short Press| Volume down, 16 levels in total;
Long Press| Previous track; AUX mode long press is volume continuous decrease.
| Short Press| 1. Music playback status: play, pause function;
2. When a call comes in: short press to pick up the call:
3. When the call has been answered, a short press to hang up:
Doubleclick| 1. When TWS is not connected, double-click each of the two speakers to enter the TWS connection
2.In the state of the TWS connection, double-click to disconnect the TWS connection;
Long Press| 1. In connection state: Long press 2s to disconnect:
2. In the state of the calling: Long press 2s to reject the phone;
3. When the device is abnormal or the system is halted. long press 6 seconds the device will restore automatically and then cut off the power.
+| Short Press| Volume up, 16 levels in total;
Long Press| Next track; AUX Mode long-press is volume continuous increase.
EQ| Short Press| EQ On/Off.
Long Press| 1. Long press EQ to switch MODE: BT, AUX
2. Long press 6 seconds to clear the pairing information to restore the default volume with a prompt sound, it will automatically turn off.

LED Light Explanations

1. Top right indicator light (white/blue): white for Bluetooth and blue for EQ :
   a. Bluetooth pairing white lights slowly flash; Bluetooth has already connected, the phone white light always lits;
   b. AUX\ USB_Audio mode white light always lits; white light breathes while playing, its while pausing;
   c. TWS group white lights slowly flash, group pair successful the device slowly flash, Slave speaker always lits; a cell phone is connected, the device always lits, breathes while playing;
   d. EQ ON blue light on; EQ OFF blue light off.

2. Top left indicator (white/red): white for power supply and red for charging:
   a. Power indicator light, the white light lits when it is powered on, the maximum or minimum volume flashing.
   b. The red light is always on when charging, the red light is off when the battery is full, then the green light is on; the red light is flashed at low power.

Bluetooth Pairing

After the Bluetooth speaker is powered on, the Bluetooth LED blinks and waits for the Bluetooth device to connect. Enable the device Bluetooth function and search -ZK106- and then connect with it.

AUX-IN Mode

The speaker can connect AUX audio playback, just connect the speaker with a non-Bluetooth cellphone/ MP3 player/ PC/ Notebook/Computer connection, using 3.5mm audio jack wire. Once the blue LED is lit, you can connect via a wired connection to playback music.

Sleep Mode
If the Bluetooth speaker is powered on, and there is no any operation further, ZK106 speakers will enter sleep mode after 20 minutes which can save battery power. when you need to use it, just press the power switch to turn it on.

TWS Group Feature Description

1. Turn the two-speaker on (if there is a Bluetooth device connection, discon-nect the speaker from the Bluetooth device firstly).
2. Then double click the “play/pause button on the two speakers respectively, when you hear the beep you will enter TWS pairing mode.
3. The TWS group pair is successful with a prompt sound, one white light on the right side always lights (right channel), the other white light on the right side is flashing (flashing one is left channel);
4. Enable the Bluetooth feature of Bluetooth device (cell phone), Bluetooth device name ZK106 will be searched out, then connect with it;
5. After the connection is established, the two blue lights are always lit, you can enjoy wireless stereo sound effects when music plays;
6. The devices which is successful in group pairing will pair very fast when it is powered on next time, there is no need to repeat the steps above.
7. If the device has ever had a group pair against TWS, it is recommended to press the ‘EQ” button 6 seconds after the power turned on (restore factory settings) and restart the machine, then refer to the above 1-5 operation, the TWS group pair can be successful;
8. When calling in TWS mode only the left channel speaker has a hands-free function, the right channel speaker is silent.

Please keep this manual handy for future reference
To clean the ZK106 Bluetooth speaker use a lightly dampened cloth in water to clean the exterior in case it gets dirty. Do not use any form of detergents or cleaning material to clean this speaker, any type of chemical may make this device unusable. Do not disassemble this product. It contains no user- serviceable parts. Do not drop or jump on it, treat it with care for the best performance. Keep the speaker in a dry location. Dust, dirt & moisture from humidity can accumulate on the body of the speaker if kept at an unfriendly place. Do not dispose of this product in fire, batteries may explode or leak.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equip-ment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions.
(1) this device may not cause harmful interference, and.
(2) this device must accept any interference received, including interference that may cause undesiredopertion.
DOC
Learn more about the EU Declaration of Conformity, please click the below link to download:
https://www.zamkol.com/upload/admin/20210402/ZK106-DOC-EN.pdf

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>