QUNDAXI B0B67P48VY Band Compatible Slim Watch User Guide
- May 15, 2024
- QUNDAXI
Table of Contents
QUNDAXI B0B67P48VY Band Compatible Slim Watch
Product Information
- Watch the Case Installation Tutorial
- On the front and back of the case, the rotation button is on the right side of the front.
- The watch strap is aligned with the crown hole of the protective case.
- The watch enters from the front of the case, and the crown is installed first.
- Press the rest part into the case.
- Notice: After installation, if the case hole is not very suitable, please gently pull the case to better match the watch.
- Installation completed effect
- Watch Band Length Adjustment Tutorial
- Put the watch band into the tool watch band, align the needle hole, and press the needle core clockwise in the direction of the arrow.
- Pull the pin out of the watchband and separate the band’s link to adjust the length.
- Rotate the dial from smaller to bigger to adjust the pin for the desired length.
- Insert the pin core into the connecting hole from the opposite direction of the arrow.
- Use the end of the tool or any sturdy object to press the pin to level the surface.
Specifications
| Feature | Description |
|---|---|
| Case Installation | Align strap with crown hole, enter watch from the front, |
install crown first, press rest into the case.
Band Adjustment| Use the tool to align the needle hole, press the needle core,
adjust the pin, and level the pin to the surface.
FAQs
- How do I install the watch case correctly?
- Align the watch strap with the crown hole of the case, enter the watch from the front, install the crown first, and then press the rest into the case.
- What should I do if the case doesn’t fit perfectly after installation?
- If the case hole is not very suitable, gently pull the case to better match the watch.
- How can I adjust the length of my watch band?
- Place the watch band into the adjustment tool, align the needle hole, press the needle core as indicated by the arrow, pull the pin out to separate the links, and adjust to the desired length.
- Insert the pin core from the opposite direction of the arrow and use the tool to level the pin to the surface.
- Can I adjust the watch band without a special tool?
- It is recommended to use the provided tool for adjustment to avoid damaging the watch band. However, any sturdy object can be used to press the pin to level the surface if necessary.
Installation And Using Instruction
Watch the Case Installation tutorial
- On the front and back of the case, the rotation button is on the right side of the front.
- The watch strap is aligned with the crown hole of the protective case.
- The watch enters from the front of the case, and the crown is installed first.
- Press the rest part into the case.
- Notice: After installation,if the case hole is not very suitable, please gently pull the case to better match the watch.
- Installation completed effect
Watch the Band length adjustment tutorial
- Put the watch band into the tool watch band, align the needle hole, and press the needle core clockwise in the direction of the arrow;
- Pull the pin out of the watchband and separate the band’s link to adjust the length.
- Insert the pin core into the connecting hole from the opposite direction of the arrow;
- Use the end of the tool or any sturdy object to press the pin to level the surface.
Read User Manual Online (PDF format)
Loading......