QUNDAXI 40mm Apple Watch Band Case Instruction Manual
- June 1, 2024
- QUNDAXI
Table of Contents
Watch Case
Installation tutorial
- Front
- Reverse side
The front and back of the case, the rotation button is on the right side of the front.
The watch strap is aligned with the crown hole of the protective case.
The watch enters from the front of the case, and the crown is installed first.
press the rest part into the case.
Notice: After installation, if the case hole is not very suitable, please gently pull the case to better match the watch.
Installation completed effect
Watch Band
length adjustment tutorial
Put the watch band into the tool watch band, align the needle hole, press the needle core clockwise in the direction of the arrow;
- Smaller
- Bigger
Pull the pin out of the watchband and separate the band’s link to adjust the length.
- Bigger
Insert the pin core into the connecting hole from the opposite direction of the arrow;
Use the end of the tool or any sturdy object to press the pin to level the surface.