VISION VFM-WVC-2 Wall Mount Video Conference Shelf Installation Guide
- May 15, 2024
- VISION
Table of Contents
VISION VFM-WVC-2 Wall Mount Video Conference Shelf
This document provides a visual instruction guide for the Vision Wall Mount, model number VFM-WVC/2. Below are detailed steps and specifications for mounting components.
INSTALLATION INSTRUCTION
Step 1: Mounting the Wall Plate
The first diagram shows the wall plate being attached to a surface using three screws.
- Three screws are required for this step, each labeled with the letter ‘A’.
- The screws are specified as M6 x 12mm.
- A 4mm hex key, represented by the icon with a curved line and dot, is used to fasten the screws.
- The distance between the screw holes on the wall plate is 74mm.
Step 2: Attaching the Mount to the Stand
The second diagram illustrates the attachment of the mount to a stand with vertical supports.
- Two screws labeled ‘B’ and two washers labeled ‘C’ are used in this step.
- The screws are specified as M6 x 35mm.
- A 4mm hex key, similar to the one in the first diagram, is used here as well.
- The diagram shows the orientation of the washers and screws as they are to be inserted through the mount into the stand.
- The distance between the insertion points on the mount is also 74mm.
Specifications
| Component | Description | Quantity | Size |
|---|---|---|---|
| Screws (A) | Hex head screws for wall plate | 3 | M6 x 12mm |
| Hex Key | Tool for tightening screws | 1 | 4mm |
| Screws (B) | Hex head screws for mount attachment | 2 | M6 x 35mm |
| Washers (C) | Flat washers for secure attachment | 2 | N/A |
FAQ
- What tools are required for the installation?
- A 4mm hex key is required for tightening the screws provided.
- Are additional tools required for mounting?
- Users may need a drill to create holes in the mounting surface.
- Where can I find more information or assistance?
- Additional information is available at the provided URL: vav.link/vfm-wvc-2.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>