Shelly Button 1 Smart Wi-Fi Button User Guide

Shelly Button 1 Smart Wi-Fi Button

Specifications

• Product Name: Smart Wi-Fi Button
• Manufacturer: Allterco Robotics EOOD
• Model: J button7
• Wi-Fi Connectivity
• Supports iOS and Android devices
• FCC Radiation Exposure Statement compliant

Step 1: Initial Setup
Connect the device to a charger to initiate the setup process.
The device will create a WiFi Access Point.

Step 2: Connect to Device’s WiFi Network
Access the settings of your device and connect to the WiFi network created by the device.

Step 3: Device Inclusion
If using iOS, navigate to Settings > WiFi and connect to the network created by the device. If using Android, the device will automatically scan and include new devices in the connected WiFi network.

Step 4: Customize Device Settings
Enter a name for the device, choose a room for placement, select an icon or add a picture for easy recognition. Save the device settings.

Step 5: Enable Shelly Cloud Service
To enable remote control and monitoring through Shelly Cloud service, press YES when prompted.
FCC Radiation Exposure Statement
Ensure a minimum distance of 20cm between the device and your body for compliance with FCC radiation exposure limits.

Contact Information

Allterco Robotics EOOD, Sofia, 1407, 103 Cherni vrah Blvd
Phone: +359 2 988 7435
Email: support@shelly.cloud
Website: www.shelly.cloud

FAQ
Q: How can I reset the device if needed?
A: To reset the device, press and hold the reset button for 10 seconds until the LED indicators blink rapidly.

USER GUIDE

LEGEND

1. Button
2. USB port
3. Reset button

The WiFi battery operated button switch, Shelly Button1 may send commands for control of other devices, over the Internet. You can place it anywhere, and move it at any time. Shelly may work as a stand­alone Device or as an accessory to another home automation controller.

Specification

• Power supply(charger)*: 1 NSV DC Complies with EU standards:
• RE Diective 2014/53/EU
• LVD 2014/35/EU
• EMC 2004/108/WE
• RoHS2 2011 /65/UE
  • Working temperature: -20’C up to 40’C Radio signal power: 1 mW
  • Radio protocol: WiFi 802.11 b/g/n
  • Frequency: 2400 – 2500 MHz;
  • Operational range (depending on local construe­tion):
• up to 30 m outdoors
• up to indooS
  Dimensions (HxWxL): 45,5 x 45,5 x 17 mm Electrical consumption: < 1 W

*Charge not included

Technical Information

• Control through WiFi from a mobile phone, PC, automation system or any other Device supporting HTTP and/or UDP protocol.
• Microprocessor management

CAUTION! When the device is connected to a char­ger, it is also constantly active and sends the com­mand immediately.
CAUTION! Do not allow children to play with the but­ton/switch of the Device. Keep the Devices for re­mote control of Shelly (mobile phones, tablets, PCs) away from children.

Introduction to Shelly®

Shelly®is a family of innovative Devices, that al­low remote control of elect appliances through mobile phone, PC or home automation system. Shelly® uses to connect to the devices con­trolling it. They can be in the same WiFi network or they can use remote access (through the Internet). Shelly® may work standalone, without being man­aged by a home automation controller, in the local WiFi network, as well as through a cloud service, from everywhere the User has Internet access. Shelly®has an integrated web server, through which the User may adjust, control and monitor the Device. Shelly®has two WiFi modes – Access Point (AP) and Client mode (CM). To operate in Client Mode, a router must be located within the range of the De­vice. Shelly®devices can communicate directly with other WiFi devices through HTTP protocol
An API can be provided by the Manufacturer. Shelly® devices may be available for monitor and control even if the User is outside the range of the local WiFi network, as long as the WiFi router is con­nected to the Internet. The cloud function could be used, which is activated through the web server of the Device or through the settings in the Shelly Cloud mobile application.
The User can register and access Shelly Cloud, us­ing either Android or iOS mobile applications, or any internet browser and the website:
https://my.Shelly.cloud/

Installation Instructions

CAUTION! Danger of electrocution. Keep the device away from moisture and any liquids! The device should not be used in areas with high humidity. CAUTION! Danger of electrocution. Even when the Device is turned off, it is possible to have voltage across its clamps. Every change in the connection of the clamps has to be done after ensuring all local power is powered off/disconnected.

CAUTION! Before using the device please read the accompanying documentation carefully and com­pletely. Failure to follow recommended procedures could lead to malfunction, danger to your life or vio­lation of the law. Allterco Robotics is not responsible for any loss or damage in case of incor「ect installa­tion or operation of this Device.

CAUTION! Use the Device only with power grid and appliances that comply with all applicable regula­tions. short circuit in the power grid or any appliance connected to the Device may damage the Device. RECOMMENDATION! The Device may be connected (wirelessly) to and may control electric circuits and appliances. Proceed with caution! Irresponsible atti­tude could lead to malfunction, danger to your life or violation of the law.

In order to add the device to your WiFi network, please connect it to a charger first. Upon connecting it to a charger, the device will create a WiFi Access Point.
For more information about the Bridge, please visit http://shelly-api- docs.shelly.cloud/#shelly-fami­ly-overview or contact us at: developers@shelly.cloud
You may choose if you want to use Shelly with the Shelly Cloud mobile application and Shelly Cloud service. You can also familiarize yourself with the instructions for Management and Control through the embedded

Web interface
Control your home with your voice
All Shelly devices are compatible with Amazon Echo and Google Home. Please see our step-by-step guide on: https://shelly.cloud/compatibility/Alexa
https://shelly.cloud/compatibility/Assistant
Shelly Cloud gives you opportunity to control and ad­just all Shelly®Devices from anywhere in the world. You only need an internet connection and our mobile application, installed on your smartphone or tablet. To install the application please visit Google Play (Android – left screenshot) or App Store (iOS – right screenshot) and install the Shelly Cloud app.

Registration
The first time you load the Shelly Cloud mobile app, you have to create an account which can manage all your Shelly®devices.

Forgotten Password
In case you forget or lose your password, just enter the e-mail address you have used in your regis打a­tion. You will then receive instructions to change your password.

WARNING! Be careful when you type your e-mail address during the registration, as it will be used in case you forget your password

First steps
After registering, create you first room (or rooms), where you are going to add and use your Shelly de­vices.

Shelly Cloud gives you the opportunity to create scenes for automatic turning on or off of the Devices at predefined hours or based on other parameters like temperature, humidity, light, etc. (with available sen­sor in Shelly Cloud). Shelly Cloud allows easy control and monitoring using a mobile phone, tablet or PC

Device Inclusion
To add a new Shelly device turn it on and follow the steps for Device inclusion.

1. Step 1
   After the installation of Shelly following the lnstala­tion Instructions and the power is turned on, Shelly will create its own Access Point (AP). WARNING! In case the Device has not created its own AP Wi-Fi network with SSID like shellybut­ton1-35FA58, please check if the Device is connect­ed accordingly to the Installation Instructions. If you still do not see an active network with SSI D like shellybutton1-35FA58 or you want to add the De­vice to another Wi- Fi network, 「eset the Device. You will need to remove the back cover of the Device The reset button is below the battery. Carefully move the battery and hold the reset button for 1 0 seconds Shelly should turn to AP mode. If not, please re­peat  contact  customer support at support@Shelly.cloud

2. Step2
   Choose “Add Device”
   In order to add more devices later, use the app menu at the top ight corner of the main sceen and click “Add Device·. Type the name (SSID) and password for the network, to which you want to add the Device.

3. Step3
   If using iOS: you will see the following screen
   Press the home button of your iPhone/iPad/iPod. Open Settings > WiFi and connect to the Wnet­work created by Shelly, e.g. sheilybutton1 35FA58. If using Android: your phone/tablet will automatical­ly scan and include all new Shelly Devices in the WiFi network that you are connected to Upon successful Device Inclusion to the W旧net­work you will see the following pop-up:

4. Step 4:
   Approximately 30 seconds after the discovery of any new Devices on the local WiFi network, a list will be displayed by default in the “Discovered Devices· room

5. Steps:
   Enter Discovered Devices and choose the Dev,ce you want to include in your account

6. Step 6:
   Enter a name for the Device (in the Device Name field). Choose a Room, in which the Device has to be positioned. You can choose an icon or add a picture to make it easier to recognize. Press “Save Device”.

7. Step 7:
   To enable connection to the Shelly Cloud service for remote control and monitoring of the Device, press “YES” on the following pop-up
   

Shelly Device Settings
After your Shelly device is included in the app, you can control it, change its settings and automate the way it works. To enter at the details menu of the re­spective Device, simply click on it’s name. From the details menu you may control the Device, as well as edit its appearance and settings.

Internet/Security

Wifi Mode – Client: Allows the device to connect to an available WiFi network. After typing the details in the respective fields, press Connect.
Wifi Client Backup: Allows the device to connect to an available WiFi network, as a secondary (backup), if your primary network becomes unavailable. After typing the details in the respective fields, press Set.
Wifi Mode – Acess Point: Configure Shelly to create an Access point. After typing the details in the respective fields, press Create Access Point. Cloud: Enable or Disable connection to the Cloud service.
Restrict Login: Restrict the web interface of Shely with a Username and Password. After typing the details in the respective fields, press Restrict Shelly.

Actions
Shelly Button1 may send commands for control of other Shelly devices, by using a set of URL end­points. All URL actions can be found at: https://shelly-apl- docs.shelly.cloud/

• Button Short Press: To send a command to an URL, when the button is pressed once.
• Button Long Press: To send a command to an URL, when the button is pressed and hold.
• Button 2x Short Press: To send a command to an URL, when the button is pressed two times.
• Button 3x Short Press: To send a command to an URL, when the button is pressed three times.

Settings

Longpush Duration

Max·the maximum time, that the button is pressed and hold, in order to triger Longpush com­mand. Range for max (in ms): 800-2000 Multlpush
The maximum time, between pushes, when trigger­ing a multipush action. Range: 200-2000 Firmware Update
Update the firmware of Shelly, when a new version is released.

Time Zone and Geo-location
Enable or Disable the automatic detection of Time Zone and Geo-location.

Factory Reset
Return Shelly to its factory default settings

Device Reboot
Reboots the Device

Device Information

• Device ID – Unique ID of Shelly
• Device IP – The IP of Shelly in your Wi-Fi network Edit Device
• Device Name
• Device Room
• Device Picture
  When you are done, press Save Device.

The Embedded Web Interface
Even without the mobile app, Shelly can be set and controlled through a browser and WiFi connection of a mobile phone, tablet or PC Abbreviations Used

• Shelly-ID – the unique name of the Device. It con­sists of 6 or more characters. It may include num­bers and letters, for example 35FA58.
• SSID – the name of the WiFi network, created by the Device, for example shellybutton1-35FA58.
• Access Point (AP) – the mode in which the Device creates its own WiFi connection point with the re­spective name (SSID).
• Client Mode (CM) – the mode in which the Device is connected to another WiFi network.

Installation/Initial inclusion

1. Step 1
   After the installation of Shelly following the lnstala­tion Instructions and the power is turned on, Shelly will create its own WiFi Access Point (AP). WARNING! In case the Device has not created its’ own AP WiFi network with SSID like shelly­ix3-35FA58, please check if the Device is connected accordingly to the installation Instructions. If you still do not see an active WiFi network with SSID like shellyix3-35FA58 or you want to add the Device to another Wi-Fi network, reset the Device. You will need to have physical access to the Device. Press and hold the reset button, for 10 seconds. After 5 seconds, the LED should start blinking fast, after 10 seconds it should blink faster. Release the button. Shelly should return to AP mode. If not, please re­peat or contact our customer support at: support@Shelly.cloud

2. Step2
   When Shelly has created their own Wnetwork (own AP), with name (SSID) such as shellybut­ton1-35FA58. Connect to it with your phone, tablet or PC.

3. Step 3
   Type 192.168.33.1 into the address field of your browser to load the web interface of Shelly.

General。Home Page
This is the home page of the embedded web inter­face. Here you will see information about:

• Battery percentage
• Connection to Cloud
• Present time
• Settings

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.

Internet/Security

• WIFI Mode – Client: Allows the device to connect to an available WiFi network. After typing the details in the respective fields, press Connect.
• WIFI Client Backup: Allows the device to connect to an available WiFi network, as a secondary (backup), if your primary WiFi network becomes unavailable. After typing the details in the respective fields, press Set.
• WiFi Mode – Acess Point: Configure Shelly to create an aw中Access point. After typing the details in the respective fields, press Create Access Point. Cloud: Enable or Disable connection to the Cloud service.
• Rest ict Login: Restrict the web interface of Shely with a Username and Password. After typing the details in the respective fields, press Restrict Shelly SNTP Server: You can change the default SNTP server. Enter the address, and click Save Advanced – Developer Settings: Here you can change the action execution via CoAP (ColOT)  via MQTT.
• WARNING! In case the Device has not created its’ own AP network with SSID like sheliybut­ton1-35FA58, please check if the Device is connect­ed accordingly to the Installation Instructions. If you still do not see an active W由network with SSI D like sheilybutton1-35FA58 or you want to add the De­vice to another Wi-Fi network, reset the Device. You will need to remove the back cover of the Device The reset button is below the battery. Carefully move the battery and hold the reset button for 1 0 seconds Shelly should 「eturn to AP mode. If not, please peat or contact our customer support at
  support@Shelly.cloud Settings

Longpush Duration

• Max – the maximum time, that the button is pressed and hold, in order to triger Longpush com­mand. Range for max (in ms): 800-2000 Multipush
  The maximum time (in ms), between pushes, when triggering a multipush action. Range: 200-2000 Firmware Update
  Update the first mware of Shelly, when a new version is released.

Time Zone and Geo-location
Enable or Disable the automatic detection of Time Zone and Geo-location

Factory Reset
Return Shelly to its factory default settings Device Reboot
Reboots the Device.

Device Information

• Device ID – Unique ID of Shelly
• Device IP – The IP of Shelly in your Wi-Fi network

Actions
Shelly Buttonl may send commands for control of other Shelly devices, by using a set of URL end­points.
All URL actions can be found at: https://shelly-api-docs.shellv.cloud/

• Button Short Press: To send a command to an URL, when the button is pressed once.
• Button Long Press: To send a command to an URL, when the button is pressed and hold
• Button 2x Short Press: To send a command to an URL, when the button is pressed two time.
• Button 3x Short Press: To send a command to a URL, when the button is pressed three times

Additional Information
The device is battery-powered, with a “wake” and “sleep” mode.
The majority of the time Shelly Button will be in “sleep” mode when on battery power, to provide a longer battery life. When you press the button, it “wakes, sends the command you need and it goes in·sleep” mode, to preserve power.
When the device is constantly connected to a char­ger, it sends the command immediately.

• When on battery power – the average latency is around 2 seconds.
• When on USB power – the device is always con­nected, and there is no latency.

The reaction times of the device are dependent on internet connection and signal strength

FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
You can see the latest version of this User Guide in .PDF by scanning the QR code or you can find it in the User manual section of our website: https://shelly.cloud/supportuser-manuals/

• Allterco Robotics EOOD, Sofia, 1407, 103 Cherni vrah Blvd +359 2 988 7435, support@shelly.cloud  www.shelly.cloud
• The Declaration of Conformity is available at www.shelly.cloud/declaration-of-0nfonnlty
• Changes, in the contact data are published by the Manufacturer at the official website of the Dce WWW.Shelly.cloud
• The User is obliged to stay informed of any amendments of these warranties before exercising his/her rights against the Manu­facturer.
• All rights to tradema的She®and Shelly®, and other intellectual rights associated with this Device belong to Allterco Robotics EOOD.

References

• Shelly Control

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>