Officelink 51E1Q Mini Desk Socket User Manual
- June 16, 2024
- Officelink
Table of Contents
Mini Desk Socket
Instruction
CIXI MINGYE COMMUNICATION AND ELECTRONI CCO., LTD
Control No.:AB-05-51E1Q-03 User Manual -2023
INTRODUCTLON
51 series is ® 80mm grommet which consolidates all power & data options. Open & close cap is with wireless charger ( >83% charing efficiency). The replaceable date modules, including USB data extension, RJ45, HDMI and cable through hole, make the roduct still flexible after installation. In a word, we realize power+ USB chargert+wireless chargertre placeable date, all in a ® 80mm size grommet.
TECHNTCAT PARAMETER
| Rate current | 15A |
|---|---|
| Rate voltage | 12W |
| Max power | 1875W |
| Provision for earthing | with earthing contact |
| Number of poles | 2P+ **** |
| Optional function | Wireless charging |
Cable through, HDMI jack ,HDMI jack,USB data extension connector(These modules
are used separately)
Wireless charging| frequency band:111-205KHZz
the maximum RF Power: 5W
System Hardware Version: V1.1
System Software Version: V1.1
Environment temperature: -10-45°C
USB charger| USB-C Output:5V3A,9V2A,12V1.5A USB-A Output:5V3A,9V2A,12V1.5A
USB-C + USB-A Output: 5V3A Wireless Charger Output: SVIA
Color| Black,White (can custom made)
Protection against electric shock| IP20
Note:
•This product could be used indoor only
•Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Caution:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
INSTALLATION AND USE
