powrlabs DAF01lB5VUw Heart Rate Monitor Chest Strap User Manual
- June 15, 2024
- powrlabs
Table of Contents
Powr Labs User Manual
Version No.: V2.0
www.powr-labs.com/ARMpairing
support@powr-labs.com
Thank you for purchasing this Heart Rate Sensor. This device supports both
Bluetooth 5.0 and ANT + technology, real-time monitoring heart rate, and
wireless data transmission to your phone or sports watch.
For detailed pairing instructions and compatibility, visit: www.powr-
labs.com/HRMpairing
- IMPORTANT: This product is for sport purposes only and it is not meant to replace any medical advice.
Device Overview
How to use
Wear the Heart Rate Sensor
- Moisten the electrode areas of the chest strap:
- Attach the connector to the chest strap, marked ‘L towards left;
- Adjust the strap length to fit tightly but comfortably. Check that the moist electrode areas are fitmly against your skin.
- After Bluetooth connection, the white LED flashes for 20 seconds a ho and then goes off.
Compatible Apps & Devices:
General Fitness & Heart Rate Tracking Apps: we recommend Elite HRY, Heart
Graph & iCardio.
Cycling Apps: Strava, Zwift, Peloton, Wahoo, Polar Beat
Running Apps: Map My Run
Compatible Devices: Garmin bike computers & watches,Wahoo bike computers,
Polar bike computers & watches,Apple watch, Peloton equipment
For detailed list & pairing instructions: www.powr-
labs.com/HRMpairing
Caring for your device
This device is a high-tech instrument that should be handled with care. Follow
the caring instructions to ensure reliable measurement and to maximize the
life span of the heart rate sensor.
Heart rate connector
Detach the connector from the strap after every use and dry the connector
with a soft towel. Do not use cleaning chemicals.
Chest strap
Rinse the strap under running water after every use and hang to dry.
Cleaning of strap ina washing machine or dryeris strongly prohibited.
*Never use cleaning chemicals. (Cleaning chemicals may cause chest fast aging, shorten service life). ‘
Batteries
This device uses the CR2032 battery, which has been installed in the heart rate connector. The battery life is 10 months ( using 2 hours per days)
Battery replacement
Using acoin, twist the battery door counter clockwise untilit clicks out of
place. Remove the battery, and the battery according to the location of the
regulations to dispose of the battery correctly. Replace the battery positive
(+) side up.Use a coin to twist the battery door back into place. For free
battery replacements during the first 12 months visit: www.powr-
labs.com/freebatter
To avoid danger, batteries should be kept away fromthe children’sarea.
Heart Rate Sensor specifications
| weight | 16g | Battery | 1 x CR2032; 3v; 200mAh |
|---|---|---|---|
| Heart Rate Range | 30⁓240BPM | Water Proof | IP67 |
| Wireless Transmission | Bluetooth 5.0 & ANT+ | Size | 59.5 X 34.0 x 11.8mm |
| Transmission Distance. | Bluetooth 5.0:10m ANT+; 10m | strap Adjustable | L.65 ⁓ |
95 cm
Battery Life| 10 months ( using 2 hours per days)
All technology will be subject to actual.
Suitable model:
C3 iOS9.0 system version above, iPhone 4s or later.
Any Bluetooth 4.0 enabled Android device with Android 4.4 or later.
www.powr-labs.com/HRMpairing
support@powr-labs.com
ANT+ decoding devices which support heart rate profile(HRP), pls go to https://www.thisisant.com/directory/ for the compatible devices.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>