RISOPHY PC365A Wireless Optical Mouse User Manual

RISOPHY PC365A Wireless Optical Mouse

DIAGRAM

1. Left Button
2. Scroll Wheel Button
3. Right Button
4. DPI+Button
5. DPI- Button
6. Fire Button (unavailable in bluetooth mode)
7. Forward
8. Backward
9. Pairing button

PACKING LIST

INSTRUCTIONS

2.4G Mode

1. Set the switch at the bottom of the mouse to 2.4G
2. Take out USB receiver from the bottom of the mouse and plug it into computer. You can use the mouse after the computer instals its driver automatically.

BT Mode

1. Set the switch at the bottom of the mouse to BT.
2. Press the pairing button for 3 seconds, then the mouse enters pairing state
3. Turn on the Bluetooth on your computer. Select “BT5.0 Mouse” to connect. You can use the mouse after successful connection.

Wired Mode
Take out the mouse, connect mouse to the computer with the included charging cable, wait for the driver to finish installation, then you can use the mouse in wired connection.

PRODUCT FEATURES

1. Programming function: The mouse can use the programming softvware to customize the key functions, return rate adjustment, lighting effects, and DPI setting.
   The programming software can be downloaded via https://gamingffe.com/pages/download.

2. Five DPl adjustments: 1200 red/2400 blue/3500 green/5500 yellow/ 7500 azure/10000 purple, The factory default DPI is 1200. Use the DPl+/ DPI – button to switch among DPI modes.

3. Low battery remind: When the battery is low, the red LED light will flash to remind. Please charge the mouse in time.

4. Charging function: use the provided charging cable to charge the mouse in wired mode, when charging, the light of the scroll wheel button is always on in red; when filling, the normal light effect is restored.

5. The mouse has 7 light modes: 6 light modes and 1 off mode. Press the forward button and the scroll wheel at the same time to cycle through the lighting modes.

SOLUTION TO CONNECTION

FAILURES IN 2.4G MOD E

1. Set the switch at the bottom of the mouse to 2.4G.
2. LONG press the left keys, right keys and the scroll button simultaneously for 3 seconds above.
3. Plug the USB receiver to the computer, it will restart to w/ork aaain

SOLUTIONS FOR ABNORMAL CONNECTION IN BTI MODE

1. Delete the Bluetooth list on your computer.
2. Set the switch at the bottom of the mouse to BT.
3. Long press the pairing button for 3 seconds, the mouse enters pairing.
4. Turn on the Bluetooth on your computer. Select “BT5.0

Mouse” to connect. You can use the keyboard after successful connection.
If the product is still unworkable after above solutions, please repeat these steps for code pairing again. If your problems can’t get solved yet after that, please contact our customer service for help. ( Email: csforcustomer@gmail.com)

NOTE:

1. Please do not use the mouse on the glass or mirror.
2. Programming software is only available on Windows.
3. Forward and Backward button are unavailable on Mac OS

CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical & Electronic Equipment)

• This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
• To prevent possible harm to the environment or human health from uncontrolled waste disposal. please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
• Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
• Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to oomply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordan ce with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving ante nna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

1. this device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

CALIFORNIA PROPOSITION 65
WARNING: Risk of Cancer from [Name of one or more chemicals known to cause cancer] And Reproductive Harm From [Name of one or more chemicals known to cause reproductive toxicity) Expos ure – www.P65Warnings.ca.gov.

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>